/**************************************************************************
** ND120 CPU, MM&M                                                       **
** CPU/MMU/PTIDB                                                         **
** PT TO IDB                                                             **
** SHEET 30 of 50                                                        **
**                                                                       **
** Last reviewed: 2-FEB-2025                                             **
** Ronny Hansen                                                          **
***************************************************************************/

// verilator lint_off ASSIGNDLY

module CPU_MMU_PTIDB_30 (
  input WRITE,  // Direction: 0=Read from B,1=Write to B  (DIR)
  input EPTI_n, // Enable PTI(negated)        (OE_n)

  input  [15:0] IDB_15_0_IN,  // IDB in and
  output [15:0] IDB_15_0_OUT, //             out

  input  [15:0] PT_15_0_IN,  //PT data bus  (B) in and out
  output [15:0] PT_15_0_OUT  //
);

  // This code replaces the original Logisim generated code with a simpler and more efficient implementation
  // It replaces two 74PCT245 chips (8-bit transceiver with 3-state outputs) with one 16 bit identical implementation.

  wire OE_n;
  wire DIR;

  assign OE_n  = EPTI_n;
  assign DIR   = WRITE;


  reg [15:0] A_reg;
  reg [15:0] B_reg;

  always @(*) 
  begin
    A_reg = IDB_15_0_IN;
    B_reg = PT_15_0_IN;
  end

  // Drive logic for IDB_15_0 and PT_15_0

  // Set IDB to B value IF DIR=0 (read) else to 3-state
  assign IDB_15_0_OUT = OE_n ? 16'b0 : !DIR ? B_reg : 16'b0;

  // Set PT to A value IF DIR=1 (write) else to 3-state
  assign PT_15_0_OUT  = OE_n ? 16'b0 : DIR ? A_reg : 16'b0;

endmodule