Extracted distribution files — COSMOS TCP/IP

Two complete kits, recovered from real SINTRAN packs rather than from distribution floppies. Every file verified; nothing here is damaged. Per-page evidence in each kit's TRUST.md.

Folder	Product	Version	Source pack
D02-gateway-and-clients/	Gateway 211185 + Telnet/FTP/RSH clients 211154	D02 / D01	c3
B05-gateway-and-telnet-server/	Gateway 211185 + clients 211154	B05	Tingo

Use B05 if you need an incoming telnet server on the ND-100 side; D02 has no TNSERV.

Layout inside each kit

Subfolder	Goes to SINTRAN user
TCP-IP/	TCP-IP
SYSTEM/	SYSTEM — the AIP-* tables (plus the original install log, reference only)
TCP-COMM/ (D02 only)	TCP-COMM — comms module source, not needed to run

Before you copy any of this onto a pack

Read ../COPYING-FILES-TO-SINTRAN.md.

Two things about these files specifically:

• Every file has a .xat sidecar carrying its real SINTRAN name, type, access bits, dates and sparse-hole map. Windows cannot put : in a filename, so TCP-START-D02:MODE is stored as TCP-START-D02.MODE — drive any restore from the sidecar, never from the Windows filename.
• The text files are 7-bit — parity was stripped during extraction. The original pack was mixed: AIP-CONFIG, AIP-HOSTS and AIP-SERVICES carried parity while AIP-NETWORKS and AIP-PROTOCOL did not, and SKP-C00 differs between its own :DEFS, :IMPT and :INTL. That distinction is not recoverable from these files or their sidecars — the per-file table is in COPYING-FILES-TO-SINTRAN.md §2, and a byte-exact copy from the source image avoids the question entirely.

Parent: ../README.md