Page 1

Norsk Data A.S. Program Description

Date	Page
86.12.10	1 of 10

Product

Name	ND-no.	Category
UNIQUE-II ISAM for ND-100	210731B	ROY

Reason

X New product

Documentation

Title	ND-no
UNIQUE-II Programmer’s Manual	60.210.2 EN
UNIQUE-II Brukerhåndbok	60.206.2 NO
UNIQUE-II User Manual	60.206.2 EN

Purpose

UNIQUE is a 4th generation program for loading, updating and retrieving data with the ISAM database system.

Prerequisites

Computer	Type	Floating format	Op. system	Version
ND-100		SIN III VS	>= I
ND-100	CX	SIN III VSX	>= I

ND-no.	Product name
210073H	ISAM II, version >= H00
210721B	BRF-LINKER, version >= B00
210191E	FORTRAN for ND-100 To make your own user defined SPECIAL routine
210507B	Software Keys
211005A	UNIQUE Text System

ND-no.	Prog.no.	File Name	Type	Containing
210005U	SUT-2412F	PERFORM-2412F	BPUN	PERFORM system
210022U	SUT-2412F	PERFORM-2412F	BPUN	PERFORM system
210005U	SUT-2412F	PERFORM-LIBR.	MCRO	PERFORM library
210022U	SUT-2412F	PERFORM-LIBR.	MCRO	PERFORM library
210455E	205489E	DDBTABLES-E02	VTM	VTM terminal desc.

Maximum Permanent Mass Storage Resources

User	User space	Number of files
DIALOG-SYS	640 pages	on 35 files
SYSTEM	2 pages	on 2 files

Minimum Permanent Mass Storage Resources

User	User space	Number of files
DIALOG-SYS	560 pages	on 19 files
SYSTEM	2 pages	on 2 files

File Information

File no.	File Name	Type	Containing
208764B	UNIQ-I-100-B	MCRO	Perform load/dump jobs
208765B	UNIQ-I-1-B	BRF	UNIQUE object code seg. 1
208766B	UNIQ-I-2-B	BRF	UNIQUE object code seg. 2
208767B	UNIQ-I-3-B	BRF	UNIQUE object code seg. 3
208768B	UNIQ-I-LIB-B	BRF	UNIQUE object code global
208769B	UNIQ-I-DUMMY-B	BRF	UNIQUE object code dummy
208770B	8KB-ISAM-BUFFER	BRF	ISAM-buff. size = 8Kb
208771B	10KB-ISAM-BUFFER	BRF	ISAM-buff. size = 10Kb
208772B	12KB-ISAM-BUFFER	BRF	ISAM-buff. size = 12Kb

ooo ND Norsk Data ooo

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 2

Program Description

Date: 86.12.10
Norsk Data A.S.
Page: 2 of 10

Product Information

Name	ND-no.	Category
UNIQUE-II ISAM for ND-100	210731B	ROY

Program List

Product Number	Name	Type	Description
208773B	14KB-ISAM-BUFFER	BRF	ISAM-buff. size = 14Kb
208774B	16KB-ISAM-BUFFER	BRF	ISAM-buff. size = 16Kb
208775B	18KB-ISAM-BUFFER	BRF	ISAM-buff. size = 18Kb
208776B	20KB-ISAM-BUFFER	BRF	ISAM-buff. size = 20Kb
208777B	22KB-ISAM-BUFFER	BRF	ISAM-buff. size = 22Kb
203535E	FORTRAN-2BANK-EO	BRF	FORTRAN library
208778B	UNIQUE-B	BASE	EXAMPLE: database setup
208779B	UNIQUE-II-I-B-0	DEFL	EXAMPLE: system setup
208780B	UNIQUE-II-I-B-E	MENU	EXAMPLE: main menu
208781B	UNIQUE-II-I-B-N	MENU	EXAMPLE: main menu
208782B	ORDRBASE-B	INFO	EXAMPLE: ORDRBASE ISAM datab.
208783B	CUSTOMER-I-B	UNIQ	EXAMPLE: customer application
208784B	KUNDE-REGISTER-I	UNIQ	EXAMPLE: customer application
208785B	PART-I-B	UNIQ	EXAMPLE: part application
208786B	VARE-REGISTER-I	UNIQ	EXAMPLE: part application
208787B	SALES-ORDER-I-B0	UNIQ	EXAMPLE: sales-order applic.
208788B	ORDRE-REGISTER-I	UNIQ	EXAMPLE: sales-order applic.
208777B	UNIQ-SP-FORT-B	SYMB	EXAMPLE: FORTRAN SPECIAL
208789B	CUSTOMER-EN-B	ISAM	EXAMPLE:
208790B	CUSTOMER-EN-B	DATA	EXAMPLE: isam- and data-
208791B	PART-EN-B	ISAM	EXAMPLE: files for the
208792B	PART-EN-B	DATA	EXAMPLE: ISAM database
208793B	ORDER-EN-B	ISAM	EXAMPLE:
208794B	ORDER-EN-B	DATA	EXAMPLE:
208795B	ORDERLINE-EN-B	ISAM	EXAMPLE:
208796B	ORDERLINE-EN-B	DATA	EXAMPLE:
208797B	CUSTOMER-NO-B	ISAM	EXAMPLE:
208798B	CUSTOMER-NO-B	DATA	EXAMPLE: isam- and data-
208799B	PART-NO-B	ISAM	EXAMPLE: files for the
208800B	PART-NO-B	DATA	EXAMPLE: ISAM database
208801B	ORDER-NO-B	ISAM	EXAMPLE:
208802B	ORDER-NO-B	DATA	EXAMPLE:
208803B	ORDRLINE-NO-B	ISAM	EXAMPLE:
208804B	ORDRLINE-NO-B	DATA	EXAMPLE:

Notes

• Version B is the first version of UNIQUE-II ISAM and it is functionally compatible with UNIQUE-II SIBAS version B.
• <rev> is to be replaced by the current revision of the DIRECTORY or FILE. The revision level is found on the preceding "ND SOFTWARE LIBRARY DISKETTE" pages.

Additional Information: - The English language version delivered on one double density diskette 210731B-EN-01D is a compiled version of the following single density diskettes: 210731B-XX-01S, 210731B-XX-02S, 210731B-XX-03S, and 210731B-EN-01S. - The Norwegian language version delivered on one double density diskette 210731B-NO-01D is a compiled version of the following single density diskettes: 210731B-XX-01S, 210731B-XX-02S, 210731B-XX-03S, and 210731B-NO-01S.

ooo   ND Norsk Data   ooo

---

Page 3

Norsk Data A.S. Program Description

Date	Page
86.12.09	3 of 10

Product	Name	ND-no.	Category
UNIQUE-II ISAM for ND-100	UNIQUE-II ISAM for ND-100	210731B	ROY

Note: A reference card for terminal types other than NOTIS should be appended to the User Manual.

Note: UNIQUE-II ISAM cannot be run without UNIQUE Text System.

Note: The file FORTRAN-2BANK-E0 has 32 bits floating numbers. Several ND-100 machines have 48 bits floating numbers. Therefore do not use this file for anything else than loading UNIQUE-II.

1 Known, But Not Corrected Errors

• If the specified default file cannot be opened, default values are used, but no error message or warning is given. The user will think the default file was OK, and will not understand why wrong defaults are used.

• The accumulate function is not working properly if the field is not in the database.

• Groups cannot be used in expressions (compute, if, etc.). The compiler will not inhibit this and the application will not run correctly if groups are used in expressions.

• The :UNIQ compiler gives wrong error message (fields width too small) if the format code is not correct (eg '00001', '33').

• If a field is defined to be longer on the screen than in the base, UNIQUE will not handle this properly (the correction of this error will cause this to be illegal).

• UNIQUE cannot handle remote printers/files when using the print commands.

• MENU-COMM may be used to enter a new application with current record. Problem: current record is set from next field, not from the calling field. If next field is another record, then this record will be transferred.

• If F7 gives no result using a group key, all the fields in the group are set to zero. This makes the use of F7 very little user-friendly.

• If the file (SYS)DDTABLES-Exx:VTM is not available (does not exist, no access, ambiguous etc.), UNIQUE gets suspended without giving any error message.

ooo   ND Norsk Data   ooo

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 4

| Date        | Norsk Data A.S.       | Page 4 of 10 |
|-------------|-----------------------|--------------|
| Product     | Name                  | ND-no.       | Category |
|             | UNIQUE-II ISAM for ND-100 | 210731B      | ROY      |

# 2 MODIFICATIONS

Note: The two next sections should be copied and distributed to all users of UNIQUE-II.

## 2.1 MODIFICATION TO THE USER MANUAL

- Section 4.1 ACCESS CONTROL is only for UNIQUE-II SIBAS. UNIQUE-II ISAM does not have an access control system.

## 2.2 MODIFICATIONS AND ADDITIONS TO THE PROGRAMMER'S MANUAL

- Error on page 33 in Programmer's Manual:

  ```
  if ("Field-A"...    if ("Field-C"....
  ```

  should be:

  ```
  if("Field-A"...    if("Field-C"....
  ```

  There must not be any space between `if` and `(`.

- Error on page 157 in Programmer's Manual:

  ```
  field="FLDA"    if("OLD:FLDA<>FIELD") then
      error
  endif
  ```

  should be:

  ```
  field="FLDA"    if("OLD:FLDA<>FLDA")
      error( <melding> )
  endif
  ```

- Addition to chapter 4.5.16 LEGAL-VALUES: Error message from (IL)LEGAL-VALUES does not contain a list of (il)legal values.

- Addition to section 4.5.18 INITIAL-VALUE (example): The initial value, PRICE, must be put into the field, ORDPRICE, *before* the record ORDLINE is fetched. In the example, this is done by join-key to register PART in the first line after the repeat command. Afterwards there is a key to fetch the ORDLINE record.

---

Page 5

| Date       | Norsk Data A.S.                                         | Page 5 of 10 |
|------------|---------------------------------------------------------|--------------|
| Product    | PROGRAM DESCRIPTION                                     | Category     |
| Name       | UNIQUE-II ISAM for ND-100                               | ND-no.       |
|            |                                                         | 210731B      |
|            |                                                         | ROY          |

- Error on page 73 in Programmer's Manual:
  Add the following after the sentence, "See chapter 7 'Communication with other program systems' for more information":  
  **6.11 Special program commands**

- Modifications to chapter 11.6 SINGLE-USER VS MULTIUSER and 12 DIFFERENCES BETWEEN ISAM AND SIBAS :
  ISAM and :DATA files have to be predefined for both single- and multiuser ISAM mode.

- There is a new option available in the :BASE file, called OWNER. You can now specify the owner of all the registers belonging to one database (ref. data-base-name in the :BASE file). If the OWNER option is used, UNIQUE expects to find all the register files (:ISAM & :DATA) and the register description file (:INFO) on this user. If the option is not used, the default is your own user.

  Example : data-base-name=COMPANY,isam-mode=0,owner=USER  
            data-base-name=ORDRBASE,isam-mode=0

- Instead of having all the registers on one USER (ref. OWNER option) you can override this in the :INFO file. Here you specify the owner of each register as a prefix to the register name(s). The owner must be written inside brackets ().

  The second possibility is to override the ISAM-MODE in the :BASE file, and have one isam-mode for each register. This is specified after the register name, separated by comma.

  Default values for the owner and isam-mode of each register are the ones used in the :BASE file.

  Example: (USER-X)CUSTOMER,1

  ```
        |------ isam-mode of the
        |      CUSTOMER register
        |
        |-----> owner of the CUSTOMER register
  ```

- Chapter 6.3 THE ACCESS CONTROL SYSTEM is only for UNIQUE-II SIBAS. UNIQUE-II ISAM does not have an access control system.

ooo  ND Norsk Data  ooo

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 6

Program Description

Date	86.12.09	Page	6 of 10
Product	Norsk Data A.S. PROGRAM DESCRIPTION	ND-no.	210731B
Name	UNIQUE-II ISAM for ND-100	Category	ROY

• Add the following text into Programmer’s Manual chapter 8.1 'Design of SPECIAL subroutines' at the end of page 78:

Note the difference between ISAM/SIBAS when using FORTRAN SPECIAL:

• SIBAS
  For parameter BREC the whole record will be transferred. You will find the actual field's value by using the UFLDINFO special routine to get the start position in the record before accessing BREC.

• ISAM
  Only the field value for current field will be transferred in BREC from position 1 and onwards.

Using internal UNIQUE special routines:

Instead of using BREC parameter in SPECIAL call use UQGFLD, to get field's value-buffer, and use UQSFLD, to set field's value-buffer.

• Add the following text into Programmer’s Manual chapter 8.3 'Internal UNIQUE routines avail...' at the end of page 88 after UFLDINFO-description:

UNIQUE internal special routine for ISAM-users:

UQISDATA - Get field information using register name & item name.
COBOL and FORTRAN interface:

CALL UQISINFO(regname,itmname,regid,reclen,itmid,itmstrt,itmlen)

Name	Direction	Type	Function
REGNAME	INPUT	int	Register name (4 int*2 words)
ITMNAME	INPUT	int	Item name (4 int*2 words)
REGID	OUTPUT	int*2	Register id (use in ISAM calls)
RECLEN	OUTPUT	int*2	Record length on ISAM file
ITMID	OUTPUT	int*2	Item id (use in ISAM calls)
ITMSTRT	OUTPUT	int*2	Item start addr. in record
ITMLEN	OUTPUT	int*2	Item length in bytes

When using ISAM-calls in your SPECIAL routine you can get both register id & item id, which are parameters required in ISAM-calls.

• ISAM does not have display formats. UNIQUE display formats are used in the application examples described in chapter 2 in the Programmer’s Manual.

ooo ND Norsk Data ooo

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 7

Program Description

Date	Norsk Data A.S.	Page
86.12.09	PROGRAM DESCRIPTION	7 of 10

Product	Name	ND-no.	Category
	UNIQUE-II ISAM for ND-100	210731B	ROY

3 Installation

3.1 Software Key, Protection of the UNIQUE-II Product

To avoid unauthorized installation of the product, UNIQUE-II uses the Software Key system of SINTRAN III. The Software Key is delivered along with UNIQUE-II. Assure that the Software Key is properly installed before installing UNIQUE-II.

If UNIQUE-II still does not start correctly, check with your local ND office that the CPU number of your SINTRAN III is correct. If SINTRAN III is generated with incorrect CPU number, it must be regenerated.

3.2 ISAM Data Buffer Size

The xxKB-ISAM-BUFFER:BRF files are used to set the ISAM data buffer size. Maximum size is 22Kb if the applications in your installation does not contain any SPECIAL routines. If there are SPECIALS involved, you have to reduce the ISAM buffer size at least as much as the data area size of the SPECIAL routines. The possible ISAM buffer sizes are 22-, 20-, 18-, 16-, 14-, 12-, 10- and 8Kb. By inspecting the load run, you will find out how much you have to reduce the ISAM buffer size.

Example: Data area size in SPECIAL routine = 2.5Kb. ISAM buffer max. size = 22Kb - 2.5Kb = 19.5Kb. => You have to use 18Kb-ISAM-BUFFER:BRF.

In the course of the installation procedure you will be asked to specify the ISAM buffer size. When this occurs, answer 18.

Note: Loading the first PROG-file (A-UNIQ-II-I-B).

FREE : P 177777  D 175777

You must check that the data area upper limit is less than 175777. If it is greater than 175777, you will have to tune the SPECIAL's data area and ISAM buffer size so that this value will be less than 175777.

3.3 Installation Procedure

Create a user (default=DIALOG-SYS) and give 640 pages if you want to install both UNIQUE and the examples. You need 56 extra pages if you want to copy FORTRAN-2BANK.

Some of the files form an EXAMPLE system for introduction purposes. The EXAMPLE system consists of applications (:UNIQ), ISAM database (:INFO), :ISAM files and :DATA files. These examples are also found in the manuals.

ooo  ND Norsk Data  ooo

---

Page 8

Program Description

Date	Page
86.12.09	8 of 10

Product	ND-no.	Category
UNIQUE-II ISAM for ND-100	210731B	ROY

Copy the two files named UNIQUE-II-§-B-0:DEFL and UNIQUE-B:BASE to user SYSTEM. The file names must not be changed with exception to the :DEFL number and revision number.

Copy the file FORTRAN-2BANK-E0:BRF only if it is not already present in your system (normally under user SYSTEM or DIALOG-SYS).

If UNIQUE is supplied on one double density diskette then insert the diskette into a floppy drive and enter the directory 210731B--01D. Use the BACKUP-SYSTEM to copy the required files to a suitable user.

If single density diskettes are supplied, enter the directory 210731B-XX-01S and copy the required files using the BACKUP-SYSTEM. Repeat this process for the diskettes 210731B-XX-02S, 210731B-XX-03S and 210731B--01S.

An example of how to use the BACKUP-SYSTEM is shown below.

ØENTER-DIRECTORY_210731B<rev>-<language>-01,<FLOPPY-DRIVE><UNIT>↵
ØBACKUP-SYSTEM↵

BACKUP-SYSTEM / G04 85.08.26

BA-SY: COPY-USERS-FILES↵
    Destination type: D↵
    Destination directory name : ↵
    Destination user name 'DIALOG-SYS': ↵
    Source type : D↵
    Source directory name : 210731B<rev>-<language>-01↵
    Source user name 'DIALOG-SYS' : FLOPPY-USER↵
    Source file name : ↵

    Manual selection : LIST↵

Number of files copied: 31

Ba-Sy: EXIT↵

ØRELEASE-DIRECTORY 210731B<rev>-<language>-01↵
Ø

The files are now copied to the user area DIALOG-SYS.

ooo  ND Norsk Data  ooo

[Scanned by Jonny Oddene for Sintran Data ©2012]

---

Page 9

Program Description

Date	Norsk Data A.S.	Page
86.12.09	PROGRAM DESCRIPTION	9 of 10

Product	Name	ND-no.	Category
	UNIQUE-II ISAM for ND-100	210731B	ROY

From user DIALOG-SYS:

It is necessary to use PERFORM in order to load UNIQUE-II. An example of how to use PERFORM is shown below.

NOTE: :DEFL file number equal to -1 means that the file will not be read and that only the default values in UNIQUE will be used. This will speed up the starting of UNIQUE.

PERFORM

PERFORM 2412F

:MCRO filename (Default = PERFORM-LIBRARY) : UNIQ-I-100-B
Macro name (Default = LOAD-100) : ___

!-----------------------------------------------------------!
! Load UNIQUE-II-ISAM version B for ND-100                  !
!-----------------------------------------------------------!
! Segments are named "A", "B" and "C" followed by           !
! a name (default=UNIQB) given in this macro.               !
! If more than one version of UNIQUE-II is used,            !
! use other names for non standard versions.                !
! NB! BRF-LINKER version B is required                      !
! NB! This macro will only load the system! To be able      !
! to run it the macro DUMP-100 must be                      !
! run from user SYSTEM after the load is OK.                !
!-----------------------------------------------------------!
! There are 2 questions about attribute codes :             !
! 0 = normal, 2 = low intensity , 10 = underline            !
!-----------------------------------------------------------!

User name for UNIQ:BRF files (Default = DIALOG-SYS) :
Program name (Default = UNIQUE-II-I-B) :
User name for ISAM-28ANK library file (default = DIALOG-SYS) :
Number of :DEFL-file (UNIQUE-II-S-B-n-DEFL) (Default = -1) :
Name of SPECIAL library (if used) (Default = NO-SPECIAL) :
User name for FORT-28 library (Default = DIALOG-SYS) :
Segment name (max 5 letters) (Default = UNIQB) :
SPECIAL before application (0=no, 1=yes) (Default = 0) :
SPECIAL after menu command (0=no, 1=yes) (Default = 0) :
Attribute code leading text (Default = 2) :
Attribute code fields (Default = 10) : ___
Size of ISAM data buffer in Kbytes (see inst.procedurej): (default = 22) : ___

øMODE MACRO1:MODE.

This :MODE file will now load UNIQUE-II. Log in as user SYSTEM and run the dump-reentrant job :

---

ooo ND Norsk Data ooo
Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 10

Date	Norsk Data A.S.	Page 10 of 10
Program Description

Product	Name	ND-no.	Category
UNIQUE-II ISAM for ND-100	UNIQUE-II ISAM for ND-100	210731B	ROY

@PERFORM<

PERFORM 2412F

:MCRO Filename (Default =PERFORM-LIBRARY):[QIA-S]UNIQ-I-100-B\ Macro name (Default = LOAD-100) : DUMP-100

!---------------------------------------------------------------!
! Dump UNIQUE-II-ISAM Version B reentrant                       !
!---------------------------------------------------------------!
! Segment names are "A", "B" and "C" followed by                !
! a name (default=UNIQB) given in the load macro.              !
! NB! Use the same name as used when loading the system         !
!---------------------------------------------------------------!

User-name for :PROG files (Default = DIALOG-SYS) :
System-name (Default = UNIQUE-II-I-B) :
Segment-name (Max 5 char) (Default = UNIQB) :

@MODE MACRO1:MODE,,

When this job is finished, the system is ready to be used!

3.3.1 SPECIAL TEST LOADING

It is possible to load/reload SPECIAL routines without loading the whole system. The PERFORM job UNIQ-TEST-B:MCRO is provided for this purpose.

The system is loaded on 4 segments instead of 3, and there will be more segment shifting using this method. Reloading the SPECIAL routines will only take 1-3 minutes depending on the size of the routines.

1. Run the job LOAD-MAIN the first time you are loading the system

2. Run DUMP-SPECIAL from user SYSTEM

When you have changed the SPECIAL routine:

1. Run the job RELOAD-SPECIAL

2. Run DUMP-SPECIAL from user SYSTEM

3. Repeat from 4) each time you have changed the SPECIAL routine

4. When the testing is OK, the system should be loaded with the normal load job.

ooo  ND Norsk Data  ooo
Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 11

ND Software Library Diskette

Page 1

Containing

• UNIQUE-II ISAM for ND-100 (Norwegian version)

Directory Name

• 210731B00-NO-01D

User Name

• FLOPPY-USER

File Access:

• Public
• Friend
• Own

Nr	File Name	Type T	Public	Friend	Own	Pages	Bytes
0	UNIQ-I-100-B00	MCRO I	R	RWACD	RWACD	4	4172
1	UNIQ-I-1-B10	BRF I	R	R	RWACD	58	115231
2	UNIQ-I-2-B10	BRF I	R	R	RWACD	56	131826
3	UNIQ-I-3-B10	BRF I	R	R	RWACD	53	105811
4	UNIQ-I-LIB-B10	BRF I	R	R	RWACD	74	142880
5	UNIQ-I-DUMMY-B10	BRF I	R	R	RWACD	10	16584
6	18KB-ISAM-BUFFER	BRF I	R	R	RWAD	2	57
7	22KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
8	12KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
9	14KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
10	8KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
11	10KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
12	20KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
13	16KB-ISAM-BUFFER	BRF I	R	R	RWACD	2	57
14	ONDRABASE-B00	INFO I	R	R	RWACD	3	3703
15	UNIQUE-II-I-B-N	MENU I	R	R	RWACD	2	139
16	UNIQUE-II-I-B-0	OFEL I	R	RWACD	RWACD	2	75
17	UNIQ-SP-FORT-B00	SYMB I	R	RWACD	RWACD	6	9513
18	UNIQUE-B00	BASE I	R	R	RWACD	2	37
19	CUSTOMER-NO-B00	ISAM C	R	RWACD	RWACD	10	5120
20	PART-NO-B00	ISAM C	R	RWACD	RWACD	10	5120
21	ORDER-NO-B00	ISAM C	R	RWACD	RWACD	5	5120
22	CUSTOMER-NO-B00	DATA C	R	RWACD	RWACD	10	2340
23	PART-NO-B00	DATA C	R	RWACD	RWACD	10	372
24	ORDER-NO-B00	DATA C	R	RWACD	RWACD	5	480
25	ORDLINE-NO-B00	ISAM C	R	RWACD	RWACD	5	5120
26	ORDLINE-NO-B00	DATA C	R	RWACD	RWACD	5	1168
27	KUNDE-REGISTER-I	UNIQ I	R	RWACD	RWACD	2	1103
28	VARE-REGISTER-I	UNIQ I	R	RWACD	RWACD	2	1213
29	ORDRE-REGISTER-I	UNIQ I	R	RWACD	RWACD	3	2943
30	FORTRAN-2BANK-EO	BRF I	R	RWACD	RWACD	57	114098

• 31 files using 420 pages. 610 pages reserved out of 610 pages.

---

Page 12

ND Software Library Diskette

Containing

UNIQUE-II ISAM for ND-100
(English version)

Directory Name

210731B00-EN-010

User Name

FLOPPY-USER

File Access

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	UNIQ-I-100-B00	MCRO	I	R	RWACD	RWACD	4	4172
1	UNIQ-I-1-B10	BRF	I	R	R	RWACD	58	115231
2	UNIQ-I-2-B10	BRF	I	R	R	RWACD	66	131826
3	UNIQ-I-3-B10	BRF	I	R	R	RWACD	53	105811
4	UNIQ-I-LIB-B10	BRF	I	R	R	RWACD	74	142880
5	UNIQ-I-DUMMY-B10	BRF	I	R	R	RWACD	10	16684
6	18KB-ISAM-BUFFER	BRF	I	R	R	RWAD	2	57
7	22KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
8	12KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
9	14KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
10	8KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
11	10KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
12	20KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
13	16KB-ISAM-BUFFER	BRF	I	R	R	RWACD	2	57
14	ORDBASE-B00	INFO	I	R	RWACD	RWACD	3	3703
15	UNIQUE-B00	BASE	I	R	R	RWACD	2	39
16	CUSTOMER-EN-B00	ISAM	C	R	RWACD	RWACD	10	5120
17	CUSTOMER-EN-B00	DATA	C	R	RWACD	RWACD	10	2080
18	CUSTOMER-I-B00	UNIQ	I	R	RWACD	RWACD	3	1083
19	PART-I-B00	UNIQ	I	R	RWACD	RWACD	2	1213
20	PART-EN-B00	ISAM	C	R	RWACD	RWACD	5	5120
21	PART-EN-B00	DATA	C	R	RWACD	RWACD	5	372
22	ORDER-EN-B00	ISAM	C	R	RWACD	RWACD	5	5120
23	ORDER-EN-B00	DATA	C	R	RWACD	RWACD	5	240
24	ORDRLINE-EN-B00	ISAM	C	R	RWACD	RWACD	5	5120
25	ORDRLINE-EN-B00	DATA	C	R	RWACD	RWACD	5	168
26	SALES-ORDER-I-B00	UNIQ	I	R	RWACD	RWACD	3	2936
27	UNIQUE-II-I-B-0	DEFL	I	R	RWACD	RWACD	2	75
28	UNIQUE-II-I-B-0-E	MENU	I	R	RWACD	RWACD	2	121
29	UNIQ-SP-FORT-B00	SYMB	I	R	RWACD	RWACD	6	9513
30	FORTRAN-2BANK-E0	BRF	I	R	RWACD	RWACD	57	114098

31 files using 411 pages. 610 pages reserved out of 610 pages.

---