Page 1¶
Program Description¶
Date: 87.06.22
Norsk Data A/S
Page 1 of 5
Product¶
| Name | Reg. no. | Category |
|---|---|---|
| NORTEXT-100 DIGISET T20 Output Module | 210824L | STNC |
Reason¶
- [ ] New product
- [x] Error Correction
- [ ] Change/Addition
- [x] Different Environment
- [ ] Other:
Documentation¶
| Title | Reg. no. |
|---|---|
| NORTEXT-100 Typesetter Modules | 61.032.1 EN |
Purpose¶
Control the typesetter DIGISET T20.
Prerequisites¶
| Computer | Type | Floating format | Op. system | Version |
|---|---|---|---|---|
| ND-100 or ND-500 | CX | SIN III VSX | >=J |
| ND-no. | Product name |
|---|---|
| 210800L | NORTEXT-100 Editor (for TS) |
| 210802K | NORTEXT-100 Basic RT (for RT) |
| 352 | Punch IF |
| 325355 | Cable |
Minimum mass storage resources for installation¶
| User | Userspace | Number of files |
|---|---|---|
| SYSTEM | 10 pages | on 1 files |
Minimum mass storage resources permanent¶
| User | Userspace | Number of files |
|---|---|---|
| RELEASE-NTX | 250 pages | on 3 files (ND-100) |
| RELEASE-NTX | 250 pages | on 4 files (ND-500) |
| WORKFILES-NTX | 20 pages | on 1 files |
| USERFILES-NTX | 111 pages | on 1 files |
| REALTIME-NTX | 110 pages | on 3 files |
| PARAMETERS-NTX | 3 pages | on 1 files |
Max/Min number of RT-descriptions¶
- Max: 99
- Min: 1
Max/Min number of segments¶
- Max: 198
- Min: 2
Space requirements on segment file(s) is 15+32*n pages
Directory Details¶
Directory Name: 210824L-XX-01D User Name: FLOPPY-USER¶
| File Name | Type | Containing |
|---|---|---|
| INSTALL-DIGI2 | XCOM | Installation commands |
| FO-INSTALL | XCOM | Installation commands |
Directory Name: 210824L-XX-01D User Name: RELEASE-NTX¶
| File Name | Type | Containing |
|---|---|---|
| DIGI2-FO- | PROG | Program |
| DIGI2-FO- | ENTR | Data references |
| TOFOTO-DIGI2 | PROG | Program |
Reg. no. for Source: 250041L
000 ND Norsk Data 000
Scanned by Jonny Oddene for Sintran Data © 2011
Page 2¶
Norsk Data A/S Program Description¶
Date: 87.06.22
Page: 2 of 5
Product¶
| Name | Reg. no. | Category |
|---|---|---|
| NORTEXT-100 | 210824L | STNC |
| DIGISET T20 Output Module |
Directory: 210824L-XX-01D¶
User Name: REALTIME-NTX
| File Name | Type | Containing |
|---|---|---|
| DIGI2-FO- | SEGP | RT-program |
| DIGI2-FO- | SEGD | RT-program data part |
| DIGI2-FO- | ENTR | RT-program addresses |
| BUILD-FO- | XCOM | Installation commands |
Directory: 210824L-XX-01D¶
User Name: PARAMETERS-NTX
| File Name | Type | Containing |
|---|---|---|
| FOTO01-PARAM- | NTXP | Parameters |
Directory: 210824L-XX-01D¶
User Name: USERFILES-NTX
| File Name | Type | Containing |
|---|---|---|
| DIGI2-100 | DATA | Photosetter data |
Directory: 210824L-XX-01D¶
User Name: WORKFILES-NTX
| File Name | Type | Containing |
|---|---|---|
| DIGI2-100 | FORM | FOCUS forms |
Directory: 210823L-XX-02D¶
User Name: FLOPPY-USER
| File Name | Type | Containing |
|---|---|---|
| INSTALL-500-FO | XCOM | Install.commands ND-500 |
| DESCRIPTION-FILE | DESC | Description file |
| SCRATCH-FILE | LINK | Dummy file |
| SCRATCH-FILE | DSEG | Dummy file |
| SCRATCH-FILE | PSEG | Dummy file |
| DIGI2-FO- | LINK | Link file |
| DIGI2-FO- | DSEG | Data segment |
| DIGI2-FO- | PSEG | Program segment |
Errors Corrected:¶
All known errors corrected.
New Features:¶
- Output to spooling devices may now be defined for typesetter output modules. Details in the parameter file.
- The time sharing version of the output module may now be installed on an ND-100 or ND-500.
- A new parameter (COLSPACE) in the parameter file specifies the minimum space between articles when optimized output is produced. (The parameter COLWIDTH specifies the distance from the start of one column to the start of the next.)
Scanned by Jonny Oddene for Sintran Data © 2011
Page 3¶
Program Description¶
| Date | Norsk Data A/S | Page 3 of 5 |
|---|---|---|
| PROGRAM DESCRIPTION |
| Product | Name | Reg. no. | Category |
|---|---|---|---|
| NORTEXT-100 | 210824L | STNC | |
| DIGISET T20 Output Module |
- The control block:
The new fields "Extra Leading" must be initialized. Set them to -1 if you have no other well-founded ideas.
- Photosetter info table, page 6:
Control old and update new information.
- Updated with all new features in the justification module. See NORTEXT Release Information, L-version.
Installation Procedure¶
NOTE:
This installation procedure requires BACKUP-SYSTEM version F or later.
1) If you want to preserve any :PROG, :SEGP or :SEGD files from your "old system" do make backup copies now. If your "old system" was the NORTEXT J-version the "old files" are of type :BPUN. Please remember to delete this files before continuing the installation procedure. Log in as user REALTIME-NTX and type:
@DELETE-USERS-FILES--FO: YES-
2) Log in as user SYSTEM.
3) Put the installation floppy in the floppy drive and enter it with:
@ENTER-DIRECTORY,,FLOPPY-DISC-<drive-no>,,<floppy-unit>-
4) Start the installation by typing:
@X (210824:FLOPPY-USER)INSTALL=*
This XCOM file will copy all files from the floppy to the actual users on disk. Note: All the old :PROG, SEGP and :SEGD files will be deleted before copying takes place.
If this product has been installed earlier and the :FORM file is found in your system, you will be asked if you want the new form file installed (and the old one deleted). The only reason to prevent the new form file being installed should be if you already have translated the texts in the formfile. The form file in this release are with English texts only.
The same procedure will be used for the TABFIL (the data file for the photosetter), and for the parameterfile. These files are custom dependent and should not be replaced by the new ones unless the datastructure has been changed.
5) This installation job will start the customizing procedure, i.e. (REALTIME-NTX)CUSTOMIZ-NTX:XCOM will be started. You will then have to answer the questions concerning the footsetter. The customizing procedure results in a NORTEXT system definition file called
DEFINE-NORTEXT:XCOM
ND Norsk Data
Scanned by Jonny Oddene for Sintran Data © 2011
Page 4¶
Program Description¶
Product Information¶
| Product | Name | Reg. no. | Category |
|---|---|---|---|
| NORTEXT-100 | DIGISET T20 Output Module | 210824L | STNC |
Instructions¶
6) Make a hardcopy of the definition file: DEFINE-NORTEXT:XCOM. This will give you information of what your system contains, and may be helpful later.
@COPY-FILE LINE-PRINTER (REALTIME-NTX)DEFINE-NORTEXT:XCOM
7) When the installation job is finished the directory will be released and the floppy may then be removed.
8) Log out and log in as user PARAMETERS-NTX.
The photosetter programs (lines) in NORTEXT need parameter files. The parameter files contain device numbers, conversion table numbers, constants and strings necessary for the individual RT-programs. The naming convention for these files is:
FOTON-PARAM:NTXP
nn = 01, 02, 03 and so on.
CREATE-PARAM:XCOM
@X_CREATE-PARAM
9) Log out and in as user SYSTEM.
You are now ready to build the real-time part of NORTEXT. The real-time part of NORITEXT will be built according to the answers you gave during the customize dialog. Each subsystem is built by its own BUILD-file called BUILD-XX:XCOM. You may build individual subsystems if necessary without changing the rest of the system. First you must make sure that the corresponding RT-programs (lines) in question are not running.
10) Build the photo-typesetter output lines by typing:
@X_BUILD-FO
DEFINE-NORTEXT:XCOM.
ooo ND Norsk Data ooo
Scanned by Jonny Oddene for Sintran Data © 2011
Page 5¶
Program Description¶
| Date | Norsk Data A/S | Page 5 of 5 |
|---|---|---|
| Product | Name | Reg. no. |
| NORTEXT-100 | ||
| DIGISET T20 Output Module | 210824L |
Questionnaire¶
HELP YOURSELF BY HELPING US!!
Did you have any problems understanding these PD-sheets?
Have you found any errors?
Do you miss any information?
Please let us know!
Make your comments on this page and mail it to:
ND Comtec R&D
Postbox 78
N-7001 Trondheim
NORWAY
Your Comments:
Page 6¶
ND SOFTWARE LIBRARY DISKETTE¶
PAGE 1
Directory Name:
210824L05-XX-01D
Containing:¶
NORTEXT-100
DIGISET T20 Output Module
User Name: FLOPPY-USER¶
| No | File Name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | INSTALL-DIGI2 | XCOM | I | R | RWA | RWACD | 2 | 967 |
| 1 | FO-INSTALL-LO2 | XCOM | I | R | RWA | RWACD | 6 | 9610 |
2 files using 8 pages. 9 pages reserved out of 610 pages.
User Name: RELEASE-NTX¶
| No | File Name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | DIGI2-FO-L22 | PROG | I | R | RWACD | RWACD | 173 | 395264 |
| 1 | DIGI2-FO-L22 | ENTR | I | R | RWACD | RWACD | 8 | 14302 |
| 2 | TOFOTO-DIGI2 | PROG | I | R | R | RWACD | 15 | 266240 |
3 files using 196 pages. 197 pages reserved out of 610 pages.
User Name: REALTIME-NTX¶
| No | File Name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | BUILD-FO-L04 | XCOM | I | RWACD | RWACD | RWACD | 4 | 4870 |
| 1 | DIGI2-FO-L22 | SEGP | I | RWACD | RWACD | RWACD | 61 | 122880 |
| 2 | DIGI2-FO-L22 | SEGD | I | RWACD | RWACD | RWACD | 34 | 66048 |
| 3 | DIGI2-FO-L22 | ENTR | I | RWACD | RWACD | RWACD | 8 | 13894 |
4 files using 107 pages. 108 pages reserved out of 610 pages.
┌────────┐ ┌────────┐
│ │ │ │
│ └────┘ │
└────────┘ └────────┘
CONTINUED
Page 7¶
ND Software Library Diskette¶
Page 2
Directory Name: 210824L05-XX-01D
Containing¶
NORTEXT-100
DIGISET T20 Output Module
User Name: USERFILES-NTX¶
| No | File name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | DIGI2-100 | DATA | C | RWAC | RWAC | RWACD | 111 | 226304 |
1 file using 111 pages. 112 pages reserved out of 610 pages.
User Name: WORKFILES-NTX¶
| No | File name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | DIGI2-100-L02 | FORM | C | R | RWA | RWACD | 20 | 40960 |
1 file using 20 pages. 21 pages reserved out of 610 pages.
User Name: PARAMETERS-NTX¶
| No | File name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | FOTO001-PARAM-L06 | NTXP | I | R | RWA | RWACD | 4 | 2351 |
1 file using 4 pages. 5 pages reserved out of 610 pages.
Total¶
12 files using 446 pages. 452 pages reserved out of 610 pages.
Scanned by Jonny Oddene for Sintran Data © 2011
Page 8¶
ND Software Library Diskette¶
Page 1
Containing:
- Nortext-100
- Digiset T20 Output Module
Directory Name:
210824L05-KX-02D
User Name: FLOPPY-USER
| No | File name | Type | T | Public | Friend | Own | Pages | Bytes |
|---|---|---|---|---|---|---|---|---|
| 0 | INSTALL-500-FO | XCOM | I | R | RWA | RWACD | 3 | 4060 |
| 1 | DESCRIPTION-FILE | DESC | I | R | R | RWACD | 9 | 22528 |
| 2 | SCRATCH-SEG-01 | LINK | I | RWACD | RWACD | RWACD | 1 | 0 |
| 3 | SCRATCH-SEG-01 | DSEG | I | RWACD | RWACD | RWACD | 2 | 1029 |
| 4 | SCRATCH-SEG-01 | PSEG | I | RWACD | RWACD | RWACD | 2 | 5 |
| 5 | DIGI2-FO-L22 | LINK | I | RWACD | RWACD | RWACD | 166 | 337505 |
| 6 | DIGI2-FO-L22 | DSEG | I | RWACD | RWACD | RWACD | 141 | 286415 |
| 7 | DIGI2-FO-L22 | PSEG | I | RWACD | RWACD | RWACD | 120 | 242759 |
8 files using 444 pages. 444 pages reserved out of 610 pages.
Scanned by Jonny Oddene for Sintran Data © 2011