Page 1¶

Product Information¶

Product Name	Product Number
Patch Kit for ND tpServer	382300B

Platform (211560) version B

Description of Product¶

Patch Kit for ND-211560 version B is a part of the Basic System Package for ND tpServer (ND-211560), which is a prepackaged system for the ND tpServer with menu oriented operation routines for easy operation.

The following products are corrected with this Patch Kit:

250360 M09 SINTRAN III revision (patch file version) 7400 for the M-version
210913 C01 SINTRAN III Monitor Call Package
211305 C05 ND-500/5000 System Package for SINTRAN III/VSX version M
Containing:
- K02 ND-500/5000 Background Monitor
- L04 ND-500/5000 Swapper
211226 B05 Backup Manager
211304 B06 SIBAS/R
210794 E04 NOTIS-DS
211056 A06 Sprint Spooling System
210703 B00 File System Verification
210518 D07 User Environment
211327 D00 TCP/IP Basic Module III
211847 A01 ND-5830/5850 Microprogram
212176 E01 ND-5800 Microprogram
211275 E01 ND-5700 Microprogram
211274 E01 ND-5500 Microprogram
211273 E01 ND-5400 Microprogram
210337 I06 Backup System
211322 D02 DOMINO Maintenance Kit
211481 D01 DSS Test programs
211321 C03 NUCLEUS Maintenance Kit

Reason(s) for New Product or Version¶

The purpose for this product is to correct the errors discovered since versions B01 and B02 of the ND tpServer Platform.

Table of Contents¶

Section	Page
1 Read this first	2
2 Documentation	4
3 Packing List	5
4 Manual Installation Procedure	5
5 Errors Corrected	15
6 Errors Known but Not Corrected	41
7 Installing Special Modification Patches	43
8 Selecting language version of products	44
9 General Information	46
10 Files modified or replaced by this Patch Kit	47

ND-896058 EN 2

Page 2¶

Product Information¶

Date	ND ServiceTeam	Page 2 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

1 Read This First¶

The following things are required in order to use this product.

This Patch Kit requires versions B01 or B02 of the Basic Software Package for ND tpServer. If the version A09 or earlier of the Software Package is used, you must upgrade it to version B01 first. This Patch Kit is generated with a SINTRAN III/VSX-500 standard C (250306 M06) and a Patch file 7400 (250360 M09).

Changing the CPU-number in the UE-DATABASE:

UE will no longer do an automatic change of CPU-number on its database if the CPU-number is changed (or the database is moved to another machine). If the CPU-number is to be changed you must run the program (USER-ENVIRONMENT)UE-CHCPU-D07:PROG before you start the UE P-SERVER.

Even if the UE-DATABASE is not converted from another CPU, it is advisable to run this job because the 'machine name' sometimes is incorrect in the UE-DATABASE.

It is very important that this is taken care of before you start installing this upgrading kit.

The program UE-CHCPU-D07:PROG asks for the name of the database, the name and the CPU-number of the old machine. XMSG must be running and the local machine must be defined as the first machine name in XMSG.

The latest version of this program must be used. It can be copied from this Patch Kit to the user area USER-ENVIRONMENT.

Software Keys (210507B)

After installing this Patch Kit, all previously installed software keys are lost and must be reinstalled. Ensure that the diskette(s) with all necessary software keys are available before you start installation of this Patch Kit. UNIQUE is a product which requires a software key.

ND-896058 EN 2

Page 3¶

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Output to a connected printer.

By changing the variable TINFO, you can choose if you want the output to the console to be written on a printer or on the terminal.
- TINFO = 0 : the output will be written on the terminal
- TINFO = 20 : the output will be routed to a connected printer
After installation of this Patch Kit, TINFO is set to 20. If TINFO and you do not have a printer connected to the console terminal, all output will disappear.

To change TINFO, the following procedure should be used:
```
@SINTRAN-SERVICE-PROGRAM
*CHANGE DATAFIELD 1 I N Y Y
TINFO/ nnn 0       (or 20)
.
*EXIT
```

Prerequisite for all ND tpServer models:

Console terminal

310 Mbyte System disk divided into two directories: - PACK-BASIC-BOO (DISC-2-SCSI-1,0,0) - PACK-MAIN-SW (DISC-2-SCSI-1,0,1)

Streamer drive (155 Mbyte)

ND-896058 EN 2

Page 4¶

Product Information¶

Date	ND ServiceTeam	Page 4 of 58
Date 92.06.15	ND ServiceTeam	Page 4 of 58

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Documentation¶

There is one manual for the ND tpServer describing different operation parts supported by a menu system, and how to maintain these operation parts. Necessary documentation for the product elements is included in the total delivery of the ND tpServer (ND-B70027 Basic Documentation Package for ND tpServer).

The most important operation documentation:

Document	Document Number
ND tpServer System Administrator Guide	ND-830127.2
SINTRAN III System Supervisor	ND-830003.7
SINTRAN III User Guide	ND-860264.1
Backup User Guide	ND-860250.2
User Environment Reference	ND-860194.3
Filoversikt Introduksjon	ND-860213.1
File Manager Introduction	ND-860215.1
File Manager Reference Card	ND-899053.1
COSMOS User Guide	ND-860163.4
Dialogue - SIBAS/R Introduction	ND-860256.1
SPRINT User Guide	ND-860252.2 EN
SINTRAN III Commands Reference Manual	ND-860128.7 EN
SINTRAN III Monitor Calls	ND-860228.3 EN
SINTRAN III Quick Reference Card	ND-899020.2 EN
SINTRAN III Release Information, version M	ND-860230.7A EN
SINTRAN III Utilities Manual	ND-860151.3 EN
SINTRAN III Real Time Guide	ND-860133.2B EN
SINTRAN III Real Time Loader	ND-860051.8 EN
ND-100 Operator’s Communication Instruction Survey	ND-899016.2 EN
Operator panel ND-323163, how to use	ND-899030.1 EN
Performance monitoring, tuning and capacity planning	ND-830083.1 EN
Introduction to ND Office Systems	ND-860255.3 EN
Information Pamphlet for Norsk Data Customers	ND-840012.1 EN
File System Verification User Guide	ND-860354.1 EN
User Area Manager User Guide	ND-860367.1 EN
Configuration Dictionary User Guide	ND-860366.1 EN
PED User Guide	ND-860121.4 EN
ND-500 Loader/Monitor	ND-860136.4B EN
ND-SHELL Quick Reference Card	ND-899072.1 EN
TELEFIX Reference	ND-830040.2 EN
Backup Manager User Guide	ND-860276.3 EN
OEM User Guide	ND-860301.7 EN
OpenLAN Network Supervisor Guide	ND-830107.3 EN
DOMINO SCSI Operator Guide	ND-814009.1 EN
ND-LINKER User Guide & Reference	ND-860289.2 EN
Dialogue - SIBAS/R Application Development (DML)	ND-860290.2 EN
Dialogue - SIBAS/R DML Quick Reference Card	ND-899078.1 EN
Dialogue - SIBAS/R Database Definition (DRL)	ND-860282.2 EN
Dialogue - SIBAS/R DRL Quick Reference Card	ND-899051.1 EN
Dialogue - Operations	ND-830072.3 EN
COSMOS Operator Guide	ND-830025.2 EN
COSMOS Operator Card	ND-899002.0 EN

ND-896058 EN 2

Page 5¶

Product Information¶

Date	ND ServiceTeam	Page 5 of 58
92.06.15

Product name
Patch Kit for ND tpServer Platform (211560) version B

Product number
382300B

3 Packing List¶

382300 A - 1 Streamer Cassette including all files necessary for this upgrade.

The Software Key (SOFTICE) for NOTIS-DS.

4 Manual Installation Procedure¶

 ___________________________
| CAUTION!                  |
|___________________________|
| Before you start this     |
| installation procedure,   |
| ensure that you have an   |
| image backup of           |
| PACK-BASIC-BOO and        |
| PACK-MAIN-SW              |
| Set the system unavailable|
| and get all users to stop |
| working on the machine.   |
|___________________________|

Log in as user SYSTEM and do a controlled shutdown of the machine.

@MODE (MODE-FILES)SYSTEM-SHUTDOWN,,,,
Check the size and number of files for some user areas

This is a job that must be done manually.

The directory PACK-BASIC must have at least 4500 unreserved pages.

User area Free Pages Free File Entries

PACK-BASIC-BOO:RT 1100 -

PACK-BASIC-BOO:SYSTEM 1650 16

User area PACK-MAIN-SW:RT must have no files and no space. Files on this user must either be moved to user PACK-BASIC-BOO:RT or be deleted. When all files are deleted, use the command @TAKE-USER-SPACE to remove all user space from PACK-MAIN-SW:RT.

ND-896058 EN 2

Page 6¶

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	3823000B

3. Copy the First 6 Files from the Streamer Cassette¶

Insert the streamer cassette into the drive
Log in on user area SYSTEM and start the BM-OPERATOR.

@BM-OPERATOR

BmOp: COPY

Object    Copy method    Incremental  
SINTRAN   FILE          NO

From      Volume name     Computer name    Device name    U   S    Control  
          VOLUME         TPSERVER-B03                      STREAMER-1   0

To        Computer name   Directory name    User area    Mode  
          DIRECTORY                       PACK-BASIC-B    SYSTEM      Of,Nc

Selection File name     Selection date  
          INCLUDE

Select execution mode (Manual/Stop-on-error/Automatic): MANUAL

Reel: 01  Volume: TPSERVER-B03  Directory: TP-PLATFORM.TP-B03

COLD-START-SEQ:MODE     START  
SHORT-NENT:MODE         START  
BEFORE-COPY:MODE        START  
BM-OPERATOR-B05:DOM     START  
BM-OPERAT-XX-B05:SEG    START  
LIST-IMPLEMENTED:PROG   START  
ER-S3WD-DESC-D06:EDAT   CANCEL

Do you really want to ABORT the operation (Yes/No): Yes

The streamer will rewind and you can push the EXIT-key to exit from the
BM-OPERATOR and return to SINTRAN.

This operation takes about 3 minutes.

ND-896058 EN 2

Page 7¶

Product Information¶

Date	ND ServiceTeam	Page
92.06.15		7 of 58

Patch Kit for ND tpServer Platform (211560) Version B¶

Product number
382300B

4. @LIST-IMPLEMENTED@¶

If you find SINTRAN-patches on the machine that is not included in the list below, these must be run as extra patches. Note that some patches are special modification patches, and will be handled in the AFTER-COPY:MODE if you edit the file PF-MODIF-M:MODE correctly.

This is a list of minimum patches on platform B03:

	0	1	2	3	4	5	6	7	8	9
0	A	A	A	A	A	A	A	A	A	A
10	C	A	A	A	A	A	A	A	A	A
20	A	A	B	C	A	B	A	A	A	A
30						A				A
40	A	A	A	A		A			A	A
50	A	A	A	A	A	A	A	A	A	A
60	A	A		A		A				A
70						A
80	A			A	B				A
90		A	A	A	A	A	A	A	A	A
100	A	A	A	A		B	A	A	A	B
110		A		A		A	A	A	A	A
120	A	B	A		A	A		A	A	A
130		A	A	A		A	A	A	A	B
140		A	A	B		A	B		A	B
150	A		A		A	A	A	B	A
160	A	A		A	A	A		A	A	B
170		A	A	A		A			A	A
180		A	B	A		A				A

5. @MODE COLD-START-SEQ:MODE,,,,'¶

This MODE-job will prepare the COLD-START to automatically start the file SHORT-HENT:MODE.

The output from the SHORT-HENT:MODE you will find on the file HENT-OUTPUT:LIST.

This procedure takes only a few seconds.

ND-896058 EN 2

Page 8¶

Product Information¶

Date: 92.06.15
Page: 8 of 58
Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

6. Cold-Start¶

Note: Automatic start of the SHORT-HENT:MODE file is implemented.
Do NOT abort this job with the ESCAPE-key!

The sequence will finish with the message:

-- SYSTEM IS AVAILABLE, AND READY FOR PATCHING. --

This procedure takes about 4 minutes.

Log in as user area SYSTEM.

7. QMmode Before-Copy:Mode,"Before-Copy:List"¶

This MODE-job will do some preparations on different users before you start copying from the streamer cassette.
Some files are deleted and some files are renamed.

This procedure takes about 4 minutes.

8. Copy All Files from the Streamer Cassette¶

Insert the streamer cassette into the drive if it is not already inserted.

Check that you are on user area SYSTEM, and start the program BM-OPERATOR.

@ND ()BM-OPERATOR~
BmOp: COPY

Object     Copy method  Incremental
SINTRAN~   FILE~        NO~

From         Volume name  Computer name  Device name   U   S   Control
VOLUME~      TPSERVER-B03~               STREAMER-1~   0~  ~   ~

To          Computer name  Directory name  User area   Mode
DIRECTORY~  ~              PACK-BASIC~     ~           Of,Nc,Ce~

Selection   File name      Selection date
EXCLUDE~    (SYSTEM)BM-OPERAT~  
~           ~              ~

Select execution mode (Manual/Stop-on-error/Automatic): STOP-ON-ER

The streamer will rewind and you can push the EXIT-key to exit from the BM-OPERATOR and return to SINTRAN.

This operation takes about 25 minutes.

ND-896058 EN 2

Page 9¶

Product Information¶

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

9. Clean Up User Area ND-OPERATIONS¶

Log in as user area ND-OPERATIONS and execute the commands:

@COPY-FILE
"(PACK-MAIN:ND-OPERATIONS)BM-FILERE-PARA:DATA"
(PACK-BASIC:ND-OPERATIONS)BM-FILERE-PARA:DATA

@DELETE-USERS-FILES (PACK-BASIC:ND-OPERATIONS) N

Log in as user area SYSTEM and execute the command:

@DELETE-USER PACK-BASIC:ND-OPERATIONS

10. Clean Up User Area MODE-FILES¶

Log in as user area MODE-FILES and execute the commands:

@COPY-FILE
(PACK-MAIN:MODE-FILES)START-SPRINT:MODE
(PACK-BASIC:MODE-FILES)START-SPRINT:MODE

@DELETE-USERS-FILES (PACK-BASIC:MODE-FILES) N

Log in as user area SYSTEM and execute the command:

@DELETE-USER PACK-BASIC:MODE-FILES

11. Modifying for Special Modification Reports (SM Reports)¶

If you do not want to run any SM reports, verify that the file (CONFIG-FILES)PF-MODIF-M:FADM exists and consists of only one line containing the character @.

If you want to run some Special Modification patches, you must edit the file (CONFIG-FILES)PF-MODIF-M:FADM before you run the file (SYSTEM)AFTER-COPY:MODE.

A list of Special Modification Reports is found on page 23.

The file (CONFIG-FILES)PF-MODIF-M:FADM must contain the library mark for the SM report(s). After editing it should look like this (7-bit format):

PN031
PN035
@

If you want to install additional SM patches at a later stage, follow the procedure described on page 43.

Page 10¶

Product Information¶

Product Name
Patch Kit for ND tpServer Platform (211560) version B

Product Number
382300B

12. New Microprogram for the ND-5000 CPU¶

New microprogram for the ND-5000 CPU is copied to the user area SYSTEM:

MICRO-5850-12010:DATA for ND-5850 CPU
MICRO-5830-12010:DATA for ND-5830 CPU
MICRO-5800-B32:DATA for ND-5800 CPU
MICRO-5700-B32:DATA for ND-5700 CPU
MICRO-5500-B32:DATA for ND-5500 CPU
MICRO-5400-B32:DATA for ND-5400 CPU

Copy the appropriate file to the file CONTROL-STORE:DATA before you start the cold-start.

To get the CPU type for the machine you can do this:

@ND
ND-5000: VERSION ↵

Subsystem part:
System part...:
Swapper.......:
Micro program.:
CPU type......:
Accp version..:

Module:
ECO no:

Delete the files not needed on your system.

13. Edit the File (MODE)CONFIG-FILES:MODE:¶

Use an editor to edit the files(MODE)CONFIG-FILES:MODE.

The following two lines must be removed:

@CREATE-FILE (CONFIG-FILES)TCP-BA-LOAD-B:MODE,,,
@COPY-FILE (CONFIG-FILES)TCP-BA-LOAD-B:MODE (TCP-IP)TCP-BA-LOAD:MODE

ND-896058 EN 2
Scanned by Jonny Oddene for Sintran Data © 2022

Page 11¶

Product Information¶

Date	ND ServiceTeam	Page 11 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

14. Edit the LOAD-MODE:MODE File to Reflect Actual Memory Size¶

Read the file (SYSTEM)LOAD-MODE:MODE into the editor PED and edit the commands used to initialize the ND-500 Monitor to reflect the actual memory configuration:

The example below assumes 8% Mbyte memory in the ND-100 part and 32 Mbyte memory on the MF bus (ND-5000 part).

@CC ---------------------------------------------------
@CC - Initialize ND-500-MONITOR
@CC - Prior to this task @START-SERVER is performed.
@CC - Take 500 pages to DMASRV.
@CC ---------------------------------------------------

@ND-500-MONITOR 1
@CC
@CC If you have a special memory configuration you could put it in
@CC here by using the following command:
@CC
@CC DEFINE-MEMORY-CONFIGURATION
@CC 10400           [10400₈ = 8% MB]
@CC 27400           [32MB-8%MB = 23%MB of MF-bus memory is visible from ND-100]
@CC Y
@CC Y
@CC N
@CC 10400           [All of MF-bus memory is visible from ND-5000]
@CC N
@CC Y
@CC Y
@CC Y
@CC CHANGE-CPU 2      [Handle CPU number 2 if applicable]
@CC LOAD-CONTROL-STORE,,,, 
@CC CHANGE-CPU 3      [Handle CPU number 3 if applicable]
@CC LOAD-CONTROL-STORE,,,,
CHANGE-CPU 1
LOAD-CONTROL-STORE,,,,
START-SWAPPER
TAKE-N500-PAGES 400D,,
EXIT

Edit the commands relating to your memory configuration and/or CPU configuration if applicable.

ND-896058 EN 2

Page 12¶

Product Information¶

Date	ND ServiceTeam	Page 12 of 58
92.06.15

Product name¶

Patch Kit for ND tpServer Platform (211560) version B

Product number¶

382300B

15. @MODE AFTER-COPY:MODE,'AFTER-COPY:LIST'~¶

This mode file will do all the patching on the platform:

SYSTEM
- READ-SEGMENT:MODE
- INST-SPEC-MODIF:MODE
- S3-CONFIG GENERATE

Check the file AFTER-COPY:LIST to find out if there is any error messages from the patching.

This procedure takes about 5 minutes.

16. @(SPRINT-USER)IN-PRM~¶

Run the program IN-PRM to update the SPRINT Spooling System, select the option:

(1) INITIATE SPRINT

17. @COLD-START~¶

NOTE: Automatic start of the HENT-MODE:MODE file is implemented.
Do NOT abort this job with the ESCAPE-key!

Some information will appear on the console and the console printer informing the operator that the different software products are loaded.

When the cold start sequence is finished, the system is automatically restarted.

Some information will appear on the console and the console printer informing the operator that the different software products are started. The same messages will appear during a normal warm start sequence.

When the system is restarted, the following text is displayed on the console printer and on the console:

The ND tpServer is available

The installation is now complete and the ND tpServer is ready to run with a new version of the basic software.

ND-896058 EN 2

Page 13¶

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

18. @MODE (SYSTEM)REMOVE-FILES:MODE,,,¶

This mode file will remove all files used during installation.

This file itself has to be removed with the command
@DELETE-FILE REMOVE-FILES:MODE

┌─────────────────────────────────────────────────────┐
│                      CAUTION!                       │
├─────────────────────────────────────────────────────┤
│ Remember to take a complete backup of the System    │
│ disks (PACK-BASIC-BOOT and PACK-MAIN-SW). This is   │
│ for security reasons in case of disk problems later │
│ on.                                                 │
└─────────────────────────────────────────────────────┘

19. Link Applications Using SIBAS/R to the New Version of the SIBAS Library¶

All applications using SIBAS/R must be linked to the new version of the SIBAS library (SIBR-B)SIBR-LIBRARY-B06:SEG.

Use the ND-Linker (assuming the application is called APPLICATION:DOM):

@LINKER
NDL(ADV): LINKER-SERVICE-PROGRAM
NDL(SRV): CHANGE-FILE-REFERENCES APPLICATION:DOM
Old string name: (SIBR-B)SIBR-LIBRARY-B05:SEG
New string name: (SIBR-B)SIBR-LIBRARY-B06:SEG
xx substitutions done in domain APPLICATION:DOM
NDL(SRV) EXIT
NDL(ADV) EXIT

20. Select Language Versions of a Few Products¶

The products SIBAS Manager and File Manager are available in both English and Norwegian. In both cases, language is set globally for all users of the system.

Similarly, the default language in User Environment can also be set globally.

Furthermore, the SPRINT Spooling System is available in Danish as well as English and Norwegian.

Refer to page 44 for more information about selecting the language version for these products.

Page 14¶

Product Information¶

Date	ND ServiceTeam
92.06.15	Page 14 of 58

Product name
Patch Kit for ND tpServer Platform (211560) version B

Product number
382300B

21. Redefine the NOTIS-DS Database¶

+---------------------------------------------+
| NOTE!                                       |
|---------------------------------------------|
| These procedures for verification and       |
| redefinition of the NOTIS-DS database may   |
| take considerable time on large databases   |
| (several hours).                            |
|                                             |
| It is not required that you include this as |
| part of the installation, but you should    |
| note that the procedures are necessary and  |
| must be done. However, we recommend that    |
| you postpone them to a convenient time.     |
+---------------------------------------------+

+---------------------------------------------+
| NOTE!                                       |
|---------------------------------------------|
| The following only applies if you have a    |
| version E database and you have NOT already |
| performed a redefinition of the indexes in  |
| HIERARC.                                    |
|                                             |
| If in doubt, run a verification of the      |
| indexes using SIBR-DBM. If the indexes      |
| USIDGRP, USTCRE, USTMOD and USTREF exist    |
| in the tables HIERARC, the redefinition     |
| has already been run.                       |
+---------------------------------------------+

Log in as user area DSBASE and execute the following commands to copy files from user area DS-PROGRAMS to user area DSBASE:

@COPY-FILE "REDEF-IX:MODE" (DS-PROGRAMS)REDEF-IX:MODE
@COPY-FILE "REDEF-IX-DSBASE:DRL" (DS-PROGRAMS)REDEF-IX-DSBASE:DRL

Use an editor to edit the file REDEF-IX-DSBASE:DRL to include the DBA-password for your database.
(NOTE: Store in 7-bit format!)

NOTE: Ensure you take a complete backup of your database before running the redefinition!

To run the redefinition, log in as user area DSBASE and execute the command:

@MODE REDEF-IX:MODE,,,,,

After the redefinition, check the list file REDEF-IX:LIST to ensure that the run was successful.

Install the software key for NOTIS-DS.

Page 15¶

Product Information¶

Date	ND ServiceTeam	Page 15 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Errors Corrected¶

All reported errors are corrected except those listed in section 6.

Errors corrected since revision B02 of the platform, are marked with a change bar.

SINTRAN III/VSX-500 Standard system C (250306 M06):

The patch-file 7400 is included as 28 :BPUN files. The file SM-PATCHES-7400:PATC includes all special modification patches.

Patch-file 7400

Report no.:     188 A
Program:        ALL
Subject:        @FILE-SYSTEM-ERROR-MESSAGE
Symptom:        The system will sometimes stop/hang, if FILE-SYSTEM-ERROR-
                MESSAGES is on.

Report no.:     186 A
Program:        Nucleus
Subject:        Unnecessary start of the RT-program NKSERV
Symptom:        Bad performance on system where a lot of Nucleus descriptors are
                defined in the SINTRAN III configuration program or simply the
                system hangs with NKSERV using 100 % CPU.

Report no.:     183 A
Program:        ND-5000
Subject:        RFILE/WFILE in ND-5000
Symptom:        Error: MAKESEG: Specified physical page not found in memory map.

Report no.:     182 B
Program:        All
Subject:        Too many Octobus kicks in the kernel Nucleus
Symptom:        The System hangs on level 2.

Report no.:     181 A
Program:        All
Subject:        Monitor Call ADP functions 1 and 2
Symptom:        Terminal hangs in UE-RUN and the server NKSERV will use almost
                100 % CPU.

ND-896058 EN 2

Page 16¶

Product Information¶

Date	ND ServiceTeam	Page 16 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report 180 A¶

Program: ND-5000
Subject: RFILE/WFILE in ND-5000 if system has more than 32 Mbyte.
Symptom: Error: MAKESEG : Specified physical page not found in memory map.

Report 178 A¶

Program: ND-5000
Subject: ND-5000 Lock Timeout.
Symptom: The ND-5000 is terminated with error message ND-5000 Lock Timeout.

Report 175 A¶

Program: All
Subject: @CLADU or @UPDAT may cause PROMAN to terminate the Domino controllers.
Symptom:
- DP-100/TCPD: Missing Domino heartbeat, controller aborted.
- PROMAN : Controller terminated on request.

Report 172 A¶

Program: All
Subject: Error in RT-LOADER command DUMP-SEGFILE-BITMAP.
Symptom: If number of continuous free pages on segment file is > 1000000, number of continuous free pages listed is 0.

Report 171 A¶

Program: All
Subject: Hang on level 1, if command @FILE-SYSTEM-ERROR-MESSAGE is used.
Symptom: Hang in routine SPUSH, if output file is used, and the error "NO MORE PAGES AVAILABLE FOR THIS USER" has occurred.

Report 170 A¶

Program: All
Subject: Missing contact with Nucleus.
Symptom: Errors: No contact with SIBAS Process. Illegal user identifier. Status -57 etc.

Report 169 A¶

Program: All
Subject: Error in MTAD timeout routine.
Symptom: MTADs hanging in I/O-wait after disconnect from file system.

ND-896058 EN 2

Page 17¶

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report No.: 167 B¶

Program: All
Subject: Error in MON MAGTP on block-oriented internal devices.
Symptom: Error message "Buffer size too big for buffer previously obtained" is given.

Report No.: 166 A¶

Program: SCSI driver
Subject: Error when reading from Exabyte GTS streamer.
Symptom: Error message on error device: Serious SCSI magnetic tape error - 63020B - Memory Address Register not as expected.

Report No.: 163 A¶

Program: All
Subject: Error in RT-LOADER command BINARY-DUMP.
Symptom: Transfer from segment file is going the wrong way.

Report No.: 161 A¶

Program: All
Subject: @DELETE-SPOOLING-FILE
Symptom: File is deleted from the queue, but is still marked as used.

Report No.: 160 A¶

Program: All
Subject: Patch to speed up OUTBYTE from ND-500 to MTADs.
Symptom: Bad performance, especially when running X Window System.

Report No.: 159 A¶

Program: All
Subject: Error in 5MTRANS.
Symptom: Read does not supply correct data when reading from disk unit ≠ 0.

Report No.: 158 A¶

Program: All
Subject: Terminals looping after @STOP-TERMINAL.
Symptom: MINBHOLD in output data field has the value 100034.

ND-896058 EN 2

Page 18¶

Product Information¶

Date	ND ServiceTeam	Page 18 of 58
92.06.15	Product Information

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report Summaries¶

Report No.: 157 A¶

Program: ALL
Subject: Patch concerning call to ERRFATAL from routine RSWDF.
Symptom: The output value of the L-register from ERRFATAL-routine is wrong.

Report No.: 156 A¶

Program: ALL
Subject: Hang in UE-login on some terminals.
Symptom: Error message: UE Pserver is not available now.

Report No.: 154 A¶

Program: COSMOS TCP/IP
Subject: Restarting the COSMOS TCP/IP gateway.
Symptom: System stops in Errfatal with Page Fault on level 2.

Report No.: 153 A¶

Program: ALL
Subject: @STOP-TERMINAL on a terminal with an ND-500 process, and TRUE termination handling enabled, may result in hang.
Symptom: Hang on level 2.

Report No.: 151 A¶

Program: ND-5000
Subject: The LOOK-AT-HARDWARE commands can be used even when other ND-5000 processes are logged in. It needs report 150.

Report No.: 150 A¶

Program: ND-5000
Subject: Master Clear function in ND-5000 systems will not clear the FERROR flag if FERROR=2000 (ND-5000 Timeout).

Report No.: 149 B¶

Program: ND-500/5000
Subject: ND-500/5000 Timeout or hang in ND-500/5000 when the commands LOGOUT-PROCESS or ABORT-PROCESS are used.
Symptom: All the ND-5000 processes will be waiting for the 5NAMS semaphore. Logical device 1107.

ND-896058 EN 2

Page 19¶

Product Information¶

Date	ND ServiceTeam	Page 19 of 58
92.06.15

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

Report no.: 147 A¶

Program: ND-500/5000
Subject: Escape when starting a ND-500/5000 domain.
Symptom: System hangs with deadlock for system semaphores.

Report no.: 146 A¶

Program: A11
Subject: Background allocation system does not log out terminals.
Symptom: Terminals are not logged out, even if timeout is enabled.

Report no.: 145 A¶

Program: ND-500/5000
Subject: Increase tolerance in ND-500/5000 timer routine to reduce number of timeouts.
Symptom: ND-500/5000 TIMEOUT (Error code 20008).

Report no.: 143 A¶

Program: VSX
Subject: Hang in DeletePage monitor call.
Symptom: If a file has pages within the last 512 possible in a subindexed file then the monitor call never completes.

Report no.: 142 A¶

Program: ALL
Subject: Error return from MON MEXIT, MCALL and SGMYT giving run time error 42 - Overlapping segments.
Symptom: The output value of the second segment number in the error message is wrong.

Report no.: 139 A¶

Program: ND-500/5000
Subject: Error in ND-5000 systems if Local Memory ≥ 16 Mbytes and 16 ≤ MF Multiport Memory ≤ 32Mbytes
Symptom: Overwriting in context block area leading to various traps from ND-500/5000 Swapper.

Report no.: 138 A¶

Program: VSX/500
Subject: Errors in ND-5850 Tracer operations.
Symptom: Unable to run tracer: Not allowed if users logged on. Wrong number of parameters and wrong copying of data for 'fast-dump' of trace memory.

ND-896058 EN 2

Page 20¶

Product Information¶


Date	92.06.15	Page 20 of 58
ND ServiceTeam
Product Name	Product Number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report no.: 137 A¶

Program: ND-500/5000
Subject: Logout-process may result in hang.
Symptom: Hang on level 1 in routine SPUSH.

Report no.: 135 A¶

Program: VSX
Subject: MON FDINA (GetDirNameIndex) and 16-character directory names.
Symptom: Some software (for example Backup System) does not terminate the name string correctly resulting in the error ILLEGAL CHARACTER IN PARAMETER.

Report no.: 134 A¶

Program: VSX/500
Subject: Wrong layout in MF-controller’s (and Double Bus controller) error message printed by the SINTRAN III Watchdog.
Symptom: Errlog, Maint.stat., etc. is rubbish unless you shift one line up.

Report no.: 133 A¶

Program: VSX/500
Subject: Error in ND-5000 ACCP-communication function ReadAIB32. Significant for test systems only.
Symptom: Error when running test program SEMICS under SINTRAN M.

Report no.: 129 A¶

Program: ALL
Subject: Error in file page allocation. (OUTSIDE DEVICE LIMITS)
Symptom: OUTSIDE DEVICE LIMITS when writing to a file which have to be expanded.

Report no.: 128 A¶

Program: ND-5000
Subject: SWAPPER STOPPED ERROR CODE: 132B
Symptom: Swapper stops with error code 1328 when using generation 6 and ND-500/5000 Swapper version L01.

Report no.: 127 A¶

Program: ALL
Subject: TAD timeout routine.
Symptom: System hangs on level 1.

ND-896058 EN 2

Page 21¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 21 of 58

Product Name	Product Number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report Details¶

Report No.: 122 A¶

Program: ALL
Subject: STC 1950 or 2922 magnetic tape and 3600 foot tape. Same problem as report number 297 for SINTRAN III version I.
Symptom: Some functions may give "device error". One example is a LIST-VOLUME command when the volume covers all or most of a 3600 foot tape.

Report No.: 120 A¶

Program: A11
Subject: Short timeout on floppy DMA device.
Symptom: The following message is printed on the error device
"FALSE INTERRUPT LEVEL 11 Identification code 21B".

Report No.: 119 A¶

Program: A11
Subject: Error in HDLC driver for BSC/DMA.
Symptom: System stops on level 1410 with memory out of range.

Report No.: 118 A¶

Program: ALL
Subject: Monitor Call GetErrorDevice (MON 254 GERDV).
Symptom: 'OUTSIDE SEGMENT BOUNDS' Page number 762.

Report No.: 117 A¶

Program: ND-500/5000
Subject: MON RFILE/WFILE from ND-500/5000
Symptom:
1. Error message from ND-500/5000: "TOO MANY FIXED MEMORY PARTS"
2. Update of MFTABLE (local fix table) went wrong.

Report No.: 114 A¶

Program: VSX/500
Subject: Multi-CPU 5850 processor allocation. A process should be bound to the allocated CPU.
Symptom: Not the best utilization of CPUs (modification).

Report No.: 111 A¶

Program: ND-500/5000
Subject: System crash when using RFILE/WFILE from ND-500/5000 with 0 bytes to read/write.
Symptom: Fatal error from level 3 in routine LINKOVER.

ND-896058 EN 2

Page 22¶

Product Information¶

Date	ND ServiceTeam	Page 22 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report no.: 106 B¶

Program: All
Subject: Deadlock when stopping ND-500/5000 processes.
Symptom: Deadlock (involving DEMF1) sometimes occurs when stopping ND-500/5000 processes (seen when stopping SIBAS/R version B).

Report no.: 10 C¶

Program: All
Subject: Taking a MEMTOF of more than 32 Mbytes of memory.
Symptom: Not possible to dump to the first floppy diskette.

ND-896058 EN 2

Page 23¶

Product Information¶

Date	ND ServiceTeam	Page 23 of 58
92.06.15

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

General Modification Reports¶

Report no.: 179 A
Program: ALL
Subject: Disconnect Remote File Access Data Segments when maximum limit is reached.

Report no.: 164 A
Program: UE-LOGIN
Subject: UE-LOGIN fails and "NO SCRATCH FILE" is written.

Special Modification Reports¶

Report no.: 190 B
Program: VSX
Subject: UPNOD 2000 switch, disconnect terminal when logging out.

Report no.: 177 A
Program: ALL
Subject: Error in SCSI low level driver. Systems with 32 MB memory may give error message: 63020 - MAR not as expected.

Report no.: 168 A
Program: ALL
Subject: Mon MAGTP functions 26 and 27 from ND-500/5000. Odd bytecount was not allowed.

Report no.: 152 A
Program: Driver
Subject: Special character in 8-bit mode will be accepted as XON character. The input character is masked with 1778.

Report no.: 140 D
Program: ND-500/5000
Subject: RFILE/WFILE to/from several address areas on ND-500/5000 segment. Error: Too many fixed parts or Error in monitor call.

ND-896058 EN 2
Scanned by Jonny Oddene for Sintran Data © 2022

Page 24¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page 24 of 58

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

Reports¶

Report no.	Program	Subject
130 A	ALL	Error in allocating a page in file system from the Swapper Fatal error from Swapper. Error 478.
125 D	VSX	UPNOD 3000 switch, disconnect terminal when logging out.
116 B	A11	Special patch for ND Comtec Switzerland. Setting of XOFF for specific terminal.
115 A	A11	Batch output file opened for "overwrite" and not "write-append".
83 A	A11	Reduce maximum length of mail messages to 160 characters, to fit into X.29 buffer.
79 A	NOTS	Error in VTM using 8-bit I/O on NOTS terminals. Error returned: "Illegal device type". Same as report number 4 for SINTRAN III version L.
78 A	A11	Problems with 8-bit I/O on terminals. Same as report number 193 for SINTRAN III version L.
77 B	A11	Patch to remove the form feed after the spooling trailer. Same as report number 171 for SINTRAN III version L.

ND-896058 EN 2

Page 25¶

Product Information¶

Date	ND ServiceTeam	Page 25 of 58

Patch Kit for ND tpServer Platform (211560) version B¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report no.: 76 B¶

Program: A17
Subject: Patch to remove the form feed at the end of the spooling print if the spooling trailer is present. Same as report number 170 for SINTRAN III version L.

Report no.: 75 A¶

Program: A11
Subject: Patch to remove form feed at the start of the spooling print if the spooling header is present. Same as report number 169 for SINTRAN III version L.

Report no.: 74 A¶

Program: A17
Subject: Patch to remove the form feed after the spooling header. Same as report number 168 for SINTRAN III version L.

Report no.: 73 A¶

Program: A11
Subject: Patch to treat empty spooling form as normal string. Same as report number 156 for SINTRAN III version L.

Report no.: 72 B¶

Program: ALL
Subject: Spooling header with rotating alphabetic characters (instead of *) gives more even wear on character set. Same as report number 154 for SINTRAN III version L.

Report no.: 70 A¶

Program: All
Subject: How to remove one linefeed between each document on printer with tractor feed.

Report no.: 69 A¶

Program: ALL
Subject: Removes 'END OF FILE' message after @COPY command.

Report no.: 68 A¶

Program: VSX
Subject: Reduce interrupt load from HDLC connected to digital line, (for example British Telecom's Kilostream).

ND-896058 EN 2
Scanned by Jonny Oddene for Sintran Data © 2022

Page 26¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 26 of 58

Patch Kit for ND tpServer Platform (211560) Version B¶

Product Number: 382300B

Report no.: 67 A¶

Program: A11
Subject:
Make monitor call EXABS (335) available on ND-500/5000.
Same as report number 180 for SINTRAN III version L.

Report no.: 62 A¶

Program: A11
Subject:
Patch to include terminals using 3270- or VIP-emulator in
@TERMINAL-STAT list, or when MON TERST is used.

Report no.: 43 A¶

Program: vsx
Subject:
Restart after buffer full on internal devices. For
implementation and use see report 44.

Report no.: 36 A¶

Program: A11
Subject:
Patch to reset the Error Device to terminal 1 when logging out
from the terminal which is the Error Device.

Report no.: 35 A¶

Program: BP-2000 printer
Subject:
Paper Instruction Command and Character conversions on BP-2000
printer. For implementation and use: see report 33.

Report no.: 34 A¶

Program: A11
Subject:
Patch to obtain Remote-Form-Feed on Versatec plotter without
"print option", connected to ND-100 with a DMA interface.

Report no.: 32 A¶

Program: DMA-printer
Subject:
Paper Instruction Command and character conversions on DMA
printers. For implementation and use, see report 33.

Report no.: 31 A¶

Program: A11
Subject:
How to drop DTR (Data Terminal Ready), when logging out. This
applies to special devices not supplied by ND.

ND-896058 EN 2

Page 27¶

Product Information¶

Date: 92.06.15
Page: 27 of 58
ND Service Team

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

ND-500/5000 Swapper version L04 (part of ND-500/5000 System Package for SINTRAN III/VSX version M (211305C05))

Report no.	Title

There might be trashing (100% swapping) if ND-5830/5850 and large FIX areas.

Swapper does not move IX pages OVER 32MB during FIX so frequently.

Change of strategy for selecting memory if own CPU memory on the ND-5830/5850 is exhausted.

Fatal error from Swapper, error code 100₈ might sometimes occur. This is related to 'unfix' (which can be invisible to the application) and the use of the 'sequential' mode in 'file as segment' segments.

Fatal error from Swapper, error code 207₈ (Pagefault in Swapper), after a Disc Transfer Error (message). Internal error. Some internal variables not reset upon error return from segment flush (WSEG).

Error in Fix_Segment.
If 'FixToLimits' (-1) and segment size is zero ('FileAsSegment' opened for write), size will be set to 65565 (177777₈).
If you have enough memory for the Swapper to accept this, it will fail during page allocating to the file system, and leave memory links looped. This in turn will lead to the Swapper looping at 100% CPU later.

Clear TSB inserted for multi ND-5830/5850, because expected trouble at marginal timing.

No. of sectors per page in Swapper’s segment table entry is sometimes set to 4; lead to overwriting of memory and the error message: SWAP DEVICE ERROR.

Error in BIM flush of SIBAS/F.
SIBAS work area (IBLAN) is sometimes overwritten, and the result will be SIBAS INTERNAL ERROR.
The warning TRYING TO RELEASE ILLEGAL BUFFER may occur first.

Error if ND-5830 or ND-5850 CPU and extra MF-memory.
If segment to be fixed needs more than the available memory pages in ND-5850 CPU, the index pages were not correctly allocated. Swapper stops in fatal error.

ND-896058 EN 2

Page 28¶

Product Information¶

Date	ND ServiceTeam	Page
92.06.15		28 of 58

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report¶

Report no.	Title

Error in fix segment.
If fix segment and the segment to be fixed is involving more than two free-parts (One free-part is 8 Mbytes).
Swapper stops in fatal error.

Error 15g if Multi-CPU (ND-5830 or ND-5850).

NOTIS-DS for ND-500/5000 (210794E04)

Report no.	Title

Fatal error in the emulator server. SINTRAN seems to be "hanging" and the file ER-S3WD-LOG:DATA is corrupted.

Maximum number of users simultaneously connected to the emulator server is 25, should be 40.

When creating a user area in UE-PMAN (version D) and standard NOTIS-DS archive is specified, then MAILBOX with INTRAY and OUTTRAY will not be created automatically.

Using DS-BACKUP to copy documents from a NOTIS-DS version D database to a NOTIS-DS version E database, not being a supervisor user, gave error message 'You are not authorized to write this attribute'.

Fetching documents from NOTIS-DS version E02 sometimes gave only part of document. This due to wrong max. bytepointer. The symptom was in NOTIS-WP that only the first part of the document was fetched and in NOTIS-CALC that the program hung.

The List/Start command did not differ between document names ending in hyphen (-) and document names not ending in hyphen but equal up to the hyphen character.

The List/Start command would list all ambiguous document names even if there was one unique name.

The command Administration/Copy hierarchy also copied the documents while it should only copy the drawers and folders.

Copying an empty document from SINTRAN gave error message 'No such page' and the copying halted.

ND-896058 EN 2

Page 29¶

Product Information¶

Date	ND ServiceTeam	Page 29 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

SPRINT Spooling System (211056A06)¶

Report no.

Title
OpenLAN printers failed with the message 'Device not reserved'.
The error message "Impossible to send data to printer" occurred too often. If you still get this problem with printers connected to an 8-terminal interface, you should increase the buffer size on the device on input.
SPRINT could close files opened by other RT-programs if the peripheral file is deleted for an OpenLAN printer.
When having close to 60 local and remote printer definitions, SPRINT could sometimes fail to start the local printers.
SSY-SYSF:DATA could be overwritten and cause various problems.
Output files could be printed twice.
Printer definitions could be mixed. This could result in listings being printed on wrong printer.
The SSY-PICT files on the ND-5000 ES and ND-tpServer platforms must reside on user area SPRINT-USER instead of ND-OPERATIONS.
The remote printer definition on the last entry in SPRINT disappeared after restart.
Unconverted printouts via SINTRAN spooling now use default form in SPRINT.

Other hints:

If a printer gives an error message in SPRINT, you should check the printer itself before you stop and start the printer in SPRINT. Unnecessary restarting of printers will jam SPRINT, and you may end up with the message 'Sprint is busy'.

If the error device does not work, you will also get 'Sprint is busy'.

ND-896058 EN 2

Page 30¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 30 of 58

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

SPRINT Standard Printer Drivers (211058306):

Report no.	Title
-	Last line on page on FACIT-720/730 was lost.
-	Lines with leading spaces were displaced.
-	Superscript 2 and 3 had wrong underlining on Canon and Epson.
-	Underlining of blank lines did not work.
-	Font changes could give wrong character set.
-	The FCB control characters had no effect.
-	Driver could close files opened by other RT-programs.
-	The PSCRIPT-driver now supports dual-bin.
-	Driver did not select 7/8 bit mode correctly
-	Personal printers did not accept 8-bit output files.
-	PSCRIPT output was ignored on QMS-410.
-	Underlining appeared too high on some QMS-printers. To solve this, the first parameter in printer info 1 should be set to 1.
-	Y with acute accent did not work on PSCRIPT.
-	Some PSCRIPT printers could hang after a printout.
-	Landscape did not work properly on ND-720/730.
-	National code 17 (New Norwegian) is now supported.
-	Some problems with FF-after on LINE-PRINTER is corrected.
-	Manual feed on CANON LBP8 now works without having to push the FF-button.
-	Driver now allows the TIU to signal busy by sending reset. Driver will no longer stop when receiving 'SLEnetreset' or 'SLEtimedout' from SLIB.

ND-896058 EN 2

Page 31¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 31 of 58

Product Details¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

SPRINT Printer Driver for HP LaserJet Printers (211049506):

Report no.	Title
-	Last line on page on ND-708 was lost.
-	Lines with leading spaces were displaced.
-	Underlining of blank lines did not work.
-	Font changes could give wrong character set.
-	Y with acute accent did not work on PCL4.
-	Personal printers did not accept 8-bit output files.
-	Driver could close files opened by other RT-programs.
-	National code 17 (New Norwegian) is now supported.
-	OKI-800 gave a blank sheet when accessing lower input bin.
-	Driver now allows the TIU to signal busy by sending reset. Driver will no longer stop when receiving `SLEnetreset` or `SLEtimedout` from SLIB.

ND-896058 EN 2

Page 32¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 32 of 58

Product Details¶

Product Name: Patch Kit for ND tpServer Platform (211560) Version B
Product Number: 382300B

Backup Manager for ND-500/5000 (211226B05):¶

Report no.	Title
1	BM-Op sets correct JEC completion code upon error.
2	Non-valid commands is ignored when running BM-Op from Batch/Mode.
4	LIST-VOLUME works on volume spliced on more NON-SCSI media.
5	Correct error message is given upon error during copying an indexed file to volume.
6	If 'ChAb' or 'ChCo' is given for a backup of a SIBAS/F database only a warning message is given before continuing with the backup operation.
9	Using BM-FileRestore to restore a file without giving destination file type, the data type chosen will be the one found on the volume and not :DATA.
10	'Unsufficient loaded segment' should not be seen if BM-Op is installed without link to SIBAS.
14	Correct batch is chosen by Scheduler when 0 is specified.
15	'Compare error on page 0' on system disk should not occur.
16	Special generated SINTRAN versions with a non-standard number of directory entries are correctly handled.
17	Reservation procedure of destination device have been corrected.
18	Reservation of database (Db-Control = 'Fc' or 'Sc') works even if no R-log is defined for the database.
20	R-log is reset after db-backup (no mirroring case).
22	Copying an indexed file > 65536 pages is possible by using blocksize = 1 (FILE-LOCAL-BLOCKSIZE).
24	'Db wait time' may be set to 10 minutes or more.
25	LIST-VOLUME may list objects of any size.
26	Temporary mirror pools are deleted after use.
27	BM-Definition. EDIT on any field in a job should be safe.

ND-896058 EN 2

Page 33¶

Product Information¶

Date	ND ServiceTeam	Page 33 of 58
92.06.15

Product name¶

Patch Kit for ND tpServer Platform (211560) version B

Product number
382300B

Report no.¶

| Title |

28 Name of temporary mirror pool is reduced to 15 characters ('TEMP-BM-POOL-xx') in order to be able to enter it in SINTRAN if not reconnected/deleted after backup.

29 Spooling files may be restored from volume.

30 A Volume may be spliced on 2 or more floppies.

31 Improved error handling in 'Automatic' execution mode.

32 Both main pool and mirror pool are updated when restoring a contiguous file from volume to a directory on a mirrored pool.

34 Correct error message is given if no batches are available at start-up time.

35 Correct volume name is written to volume in connection with INCREMENTAL DB backup (R-log only).

36 BM-Scheduler. The complete name of the output-file for a scheduled entry is not restricted to 35 characters.

37 Routing the output from LIST-VOLUME directly to a printer will not destroy the object entry of the peripheral file.

39 Correct volume name is written to volume in connection with backup a database for which no R-log is defined.

41 Backup of more databases stored on Domino disks from one SET should not give Nucleus error.

42 The output to message device from BM-Scheduler have been adjusted to reduce buffer requirements.

LIST-VOLUME from :MODE/BATCH with output to terminal didn't give correct output
Error in updating of start-up time for periodically scheduled entries.
Password occurred in error messages
Algorithm to create temporary mirror pool was not secure
No valid checking of scheduler time data was performed
JEC-code was not correctly set in all error situations
Blank user on directory was treated as significant

ND-896058 EN 2

Page 34¶

ND ServiceTeam¶

Product Information¶

Date: 92.06.15
Page: 34 of 58

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Issues and Reports¶

Report no.	Title
-	Reporting of SIBAS-status upon error was insufficient
-	An extra empty line to end the Include/Exclude-lines was necessary in order to make the job work correctly
-	Use of EDIT command in BM-Definition could corrupt the SET
-	Authorization check was done AFTER positioning of tape
-	'No such user in main dir.' was fatal for a file backup procedure. In B05 only a warning message is given
-	If 'Compare error', the next object specified in the job led to a 'Device error' due to lack of tape positioning before continuing
-	'Compare error' from volume to disk didn't give correct source and destination device names
-	'Copying' was not written to batch output-file if copying without use of DMA-Server/IDC
-	Page-numbers > 100000 wasn't correctly displayed
-	Option 'Expand user area' ('Ce'/'Ex') didn't make space for an index page when copying an empty file to disk
-	Number of directory indexes to search is increased from 44 to 128 for SINTRAN compatibility
-	JEC code for FIRST error occurred in AUTOMATIC mode is reported instead of the last one
-	Display of old density in connection with Set-Density command was not correct
-	Bm-Op didn't execute LOAD before SET-DENSITY
-	The DMA-Server is not tried connected with BLANK password
-	Batches with no > 10 wasn't correctly logged out in connection with reservation of directory
-	The HELP-pictures have been corrected
-	Neither DMA-Server nor IDC is tried used to copy a file from a ND-100 coupled disk to a Domino/SCSI coupled streamer/magnetic tape.
-	Too few pages was given to user when restoring files in expand mode if the bytecount of the file didn’t reflect the actual file size.

ND-896058 EN 2

Page 35¶

Product Information¶

Product Details¶

Date	ND ServiceTeam	Page 35 of 58
92.06.15

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

SIBAS/R (211304B06)¶

Report no.	Title
4	Error in SIBAS-ONLINE-PRIORITY.
6	Error in SIBAS call SSCUR with option code 2 and 4.
7	Error in SIBAS call SEXMC.
9	Error in SIBAS call SGIXN if retry occurred.
10	Better utilization of SIBAS work area
11	Sort error on integer*2 indexes with duplicates allowed (DML)
12	Sort error on integer*2 indexes with duplicates allowed (DBM)
13	Sort error on integer*2 indexes with duplicates allowed (DRL)
14	Error in fetching schema information
15	Backup-manager may report fatal error in consistency check when doing backup of many databases in one backup set.
17	Error in NEW INDEX when more than 65535 pages are used on the system table
18	Error in VERIFY INDEX in regenerate mode when top-levels are beyond SIBAS page 65535
19	Error in screen oriented SIBAS service when executing database status.
20	Error in CHANGE ROW LENGTH.
21	Error in NEW COLUMN on a table which contains wide-storage
22	Reduce length of timeout before retry (Nucleus version only).
24	Error in CHANGE TABLE-SIZE.
25	Error in redefinition when database contains wide-storage tables.
26	Error in SIBAS call SSCUR with option code 0, 3 and 4.
29	Error in currency handling.

ND-896058 EN 2

Page 36¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 36 of 58

Product Details¶

Product Name	Product Number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Report¶

Report No.	Title
30	Modification patch to suppress the message: WARNING MT$WAIT * , Message in main-queue !
31	Page-link error after LOAD APPEND.
32	Problems with recovery after installing a backup copy of a database.
35	Error message "SIBRC: Internal error" may appear on the error device when SIBAS is accessed from a Dolphin Server 300/500 front.
36	Errors during Consistency check.
41	Error in initialization of sort-merge for T-indexes.
48	Wrong message to error-device when B-log is full.
49	Run SCLDB SINGLE-thread if given user already has an active task.
50	Error in SINGLE thread execution.
51	Error handling after SQL-Open introduced.
-	Error status from SQL kernel will be returned unmodified to the application.
-	Not proper cleanup after fatal error in SQL kernel.
-	Wrong revision id for SQL server.
-	Error in CHANGE-TABLE on large tables. No. of used pages is > 65535 SINTRAN pages (or will be larger due to the redefinition).
-	The command BACKUP-FTX was allowed without the database open for update by you.
-	Close temporary files before (a new) SQLOPEN is done

ND-896058 EN 2

Page 37¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 37 of 58

Product name:
Patch Kit for ND tpServer Platform (211560) version B

Product number:
382300B

Multi-Machine Operator Environment (211073A01)¶

Report no.	Title
5	Error in Send-Message in OEM-STATU program
	(see report no 4 if OLD DOMAIN FORMAT)

User Environment (210518D07)¶

Report no.	Title
1	No test for the situation 'Line lost' in UE-LOGIN.
2	Terminals are 'hanging' in UE-PMAN.
3	Maximum number of users in UE is set to 50.
	Can be changed by using 'UE-FUNC,16 '

The internal table, causing the error message "NO MORE SPACE ON USER USER-ENVIRONMENT", is expanded.
The problem that a login takes very long time when the ASCII form of a CPU-number contains a Space or a '#', is fixed.
The problem with session tables filled up is fixed.
The error with UE-EDIT creating Swedish menu source-files with language suffix SV instead of SW is fixed.

ND-896058 EN 2

Page 38¶

Product Information¶

Date: 92.06.15
Page: 38 of 58
ND ServiceTeam

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

TCP/IP Basic Module III (211327D000)¶

Report no.	Title

TCPD and Waste of Nucleus Resources
The previous versions did not release the Nucleus resources involved in error reporting from the Ethernet III controller software.

Telnet Server and Excessive Error Reported
The Telnet server sometimes continued polling connections that was disconnecting, giving excessive reports like "Illegal socket ID".

UDP-broadcasts Thrown Away
UDP-broadcasts was not handled correctly.

ARP-entries are Kept for at Least Half an Hour

The MBUFs Used by the RAW Protocol were Not Released.

Nucleus Resources Not Released
The Nucleus resources used by the controller when an application used SLib to send data with the RAW protocol, were not released.

Mixing TCP-port and UDP-port
Datagrams sent to local UDP-port number X would end up at local TCP-port number X if this did exist and had been created before the equally numbered UDP-port.

The TCP/IP Data Checksum was Not Enabled and Bad Data were Accepted.

The Heartbeat-check Mechanism Used to Check if the Ethernet III Controller is Active, Did Not Work.

The Performance of Processes Using TCP/IP is Much Better.

Some Error Reports from the Ethernet III Controller Software has been Improved, for Example the "Duplicated IP Addresses" Report Now Return Both the IP and Ethernet Addresses.

ND-896058 EN 2

Page 39¶

Product Information¶

Date: 92.06.15
Page: 39 of 58
Product Name: Patch Kit for ND tpServer Platform (211560) version B
Product Number: 382300B

DMA-Server (250089C02)¶

Report no.

no.	Title
1	Changing block size in MON ABSTR for BDIO disk.
2	Disable writing file mark and rewind on streamer. This was necessary to allow Backup Manager to copy images over more than one streamer.
3	Correction of calculation of pages copied when copying files with Backup System over more than one medium.
4	Improving timer mechanism and removing error message: "50010 - operation in progress" when starting BM-Filerestore.
5	Backup Manager image copies will sometimes fail at the end of the operation with the error message "50061 - Unknown Program Function"

File Manager (211075C03)¶

no.

no.	Title

When using File Manager version C, the User Environment profile database may increase even when no updates in the SIBAS/R database was necessary. This is now corrected. If the UE profile database has already grown too big because of this, you may use the program UE-D-SIP to delete obsolete information stored by File Manager, and then use the program UE-EX-VER-DXX executing functions Unload and Load to reduce the size of the profile database.

ND-896058 EN 2

Page 40¶

Product Information¶

Date	ND ServiceTeam	Page 40 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

ND-5830/5850 Microprogram (211847A01)¶

no.	Title
-	Changed algorithm on TSET-cycles in the lock routine. While waiting for a semaphore, TSET was run every 2 microseconds. This is now changed to 50-microsecond intervals to avoid hang situations on the MF bus.
-	Changes timing in ENTS, ENTM, ENTF, ENTB to avoid a data cache hit on an instruction channel access when I-error. Previously, this led to inconsistency between cache and memory.
-	Corrections in the WEXT instruction adding a new Octobus driver.
-	Corrections in a wait for a semaphore, introducing a 13-second timeout.
-	Changes in the Octobus driver to release the execution queue if the microprogram has reserved the queue and the microprogram must wait more than 10 microseconds. This is done to avoid Lock timeout 20.32₈.
-	Corrected logical data memory read, function 10. This is now always run with paging on to allow for segment trace and multi-CPU.

ND-5800 Micro Program (211276E01)
ND-5700 Micro Program (211275E01)
ND-5500 Micro Program (211274E01)
ND-5400 Micro Program (211273E01)

no.	Title
-	Corrections in the AXI-instruction, which lost floating precision on the operation a**n (n < 0). The correction implies a changed order of operation: division prior to multiplication when a < 1 and division after multiplication when a > 1
-	Corrections in a wait for a semaphore, introducing a 13-second timeout.
-	Changed the Octobus driver to release the execution queue if the microprogram has reserved the queue and the microprogram must wait more than 10 microseconds. This is done to avoid Lock timeout 20.32₈ and timeout 2000₈.
-	Corrections in CLREAD, NXGET and break.

ND-896058 EN 2

Page 41¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 41 of 58

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

6 Errors Known But Not Corrected¶

SIBAS Manager (211455A06)

Report no. Title

-
- User statistics returns <Unknown user name> if length of the User Environment user name is less than 8.

DMA-Server (250089C02)

Report no. Title

-
- Buffer allocation.
  The DMA-server's transfer buffers may be placed in multiport memory by setting location 10₈ on DMASEG to 0.
  The buffers may be placed in ND-100 memory by setting location 10₈ on DMASEG to 1.
  The default value is 0. A prepared patch for changing it is included in the standard load file BACKUP-LOAD:MODE.
- Backup-system compatibility.
  To allow restore of images written to streamer by Backup System location 11₈ on DMASEG should be set to 1.
  Default value for this location is 0. A prepared patch for changing it is included in the standard load file BACKUP-LOAD:MODE.

ND-896058 EN 2

Page 42¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 42 of 58

Product Information¶

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

Backup Manager for ND-500/5000 (211226B05)¶

Report no.	Title

When Backup Manager creates a temporary mirror to perform an image copy of a directory on a DOMINO/SCSI disk, the error message 'NO MORE TO COPY' will be written on the error device when the backup procedure is finished. This message can be ignored!

Multi-Machine Operator Environment (211078A01)¶

Report no.	Title
3	OE-STATU program will not work on machines with names longer than 12 characters

User Environment (210518D07)¶

Report no.	Title

Using 'Task-in-user-area' to start some products (e.g., NOTIS-WP) may cause the wrong user area to be present after the task is completed.

A workaround for this problem is to start NOTIS-WP with the option of clearing the scratch file:

@NOTIS-WP %<drawer>,<folder>,<document>

When Stop-Terminal/Timeout happens and the user is in a UE-Menu, the UE Scratch file is not reset.

ND-896058 EN 2

Page 43¶

Product Information¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

Special Modification Patches¶

Special Modification patches may now be installed while SINTRAN is running.

The installation is done as follows:

Edit the file (SYSTEM)PF-MODIF-M:FADM so it contains the number(s) of the patch(es) you want to install (for example PN032). Ensure that the file is in 7-bit format.
Run the program (SPEC-MODIF-PATCH)SM-PATCH from user SYSTEM.
This program will install the right patches in SINTRAN save area.
During the installation you may get a warning, telling you that the patch is already installed, and a question if you want to reinstall the patch. Normally, you answer No to that question.
An exception is when you are going to install a new version of a patch.
Run a cold start to get the patches into effect.
The files (SYSTEM)SM-PATCH-FILE:OUT and (SYSTEM)SM-PATCHES:OUT are the output files from the SM-PATCH-program.
Inspect them if something goes wrong during the installation.

Page 44¶

Product Information¶

Date	ND ServiceTeam	Page 44 of 58
Product name		Product number
Patch Kit for ND tpServer Platform (211560) version B		382300B

8 Selecting Language Versions¶

The products SIBAS Manager and File Manager are available in both English and Norwegian. In both cases, language is set globally for all users of the system.

Similarly, the default language in User Environment can also be set globally. In User Environment, the default language only applies when the user name is not yet known (when logging in, etc.).

Furthermore, the SPRINT Spooling System is available in Danish as well as English and Norwegian.

The following procedures apply:

SIBAS Manager

Log in to user area SYSTEM and delete the SIBAS Manager as a standard domain.

Log in to user area SIBR-B and run one of the following mode files:
```
SM-LANG-EN:MODE   (set language to English)
SM-LANG-NO:MODE   (set language to Norwegian)
```
Log in to user area SYSTEM and define the SIBAS Manager as a standard domain again.

User Environment

Log in to user area USER-ENVIRONMENT and run one of the mode files:
```
UE-ENGLISH:MODE    (set language to English)
UE-NORWEGIAN:MODE  (set language to Norwegian)
```
Then run the mode file:
```
@MODE (USER-ENVIRONMENT)UE-LOAD,,,
```
To set the language to Danish, you must acquire the language-dependent files for the Danish version of UE (diskette directory 21051BD07-DA-01D). Then copy all files except the files IN-UE-DA-D07:**** (3 files) and UE-DA-LAMU-D07:PROG to user area USER-ENVIRONMENT. When this is done, run the mode files UE-DANISH:MODE and then UE-LOAD:MODE.

ND-896058 EN 2

Page 45¶

Product Information¶

Date	ND ServiceTeam	Page 45 of 58
92.06.15

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

File Manager¶

Log in to user area ND-OPERATIONS and edit the file FM-LOAD:MODE:

File names should contain -EN (set language to English)
File names should contain -NO (set language to Norwegian)

Then run the mode file:

@MODE (ND-OPERATIONS)FM-LOAD,,,

SPRINT¶

To allow the use of Danish, you must log in to user area SPRINT and run the mode jobs:

@MODE SSY-DA,,,
@MODE LOAD-SPRINT,,,
@MODE START-SPRINT,,,

ND-896058 EN 2

Page 46¶

Product Information¶

Date	ND ServiceTeam	Page 46 of 58
92.06.15	PRODUCT INFORMATION

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

9 General Information¶

Defining OpenLAN printers with a SINTRAN spooling queue in SPRINT.

Select a SINTRAN logical device number between 2300₈ and 2377₈ (1216 to 1279 decimal).
Connect the logical device number to the COSPO datafield:

Read the file SYMBOL-2-LIST:SYMB into an editor (for example PED) and find the symbol 'F1731'. Note the value of the symbol.

In a standard M-version the value (datafield address) is 074330.

Note
This address may be different in later version. You should therefore always verify the value of this address, because patching in the wrong address may cause serious damage to your system.

Then execute the following commands:

@SINTRAN-SERVICE
INSERT-IN-LOGICAL-UNIT-TABLE
LOGICAL UNIT NUMBER (OCT): 23xx   (use the device number you selected)
INPUT OR OUTPUT? OUT
DATAFIELD ADDRESS (OCT): 072162   (use the address you noted above)
MEMORY? YES
IMAGE? YES
SAVE-AREA? YES
EXIT

Define the device number in the S3-CONFIG program and then perform a cold-start or use the command 'SET-SPOOLING-DEVICE' in the SINTRAN Service Program.
Define a peripheral file and spooling files in the usual way.
Stop COSMOS spooling by executing the command @ABORT COSPO
(Otherwise you will get the error message 'Device already defined' when defining the printer in SPRINT).
Define the printer in AIP-HOST:SYMB and SPRINT.
Start COSMOS spooling: @START-SPOOLING COSMOS-SPOOLING
Stop and start SPRINT.
(Otherwise you will get the error message 'Not opened for sequential read' when printing via SINTRAN III).

If the printer is only to be used from NOTIS-WP version N or later or other applications with a direct SPRINT interface, you should skip all steps above except 6 and 8.

ND-896058 EN 2

Page 47¶

Product Information¶

Product Name¶

Patch Kit for ND tpServer Platform (211560) version B

Product Number¶

382300B

Files Replaced by This Patch Kit¶

SINTRAN III/VSX-500 Standard System C (250306M06)

The file(s) have to be copied to user area SYSTEM:¶

File name	File size	Public access	Friend access	Own access
* COLD-START-SEQ:MODE	1	R	R	RWACD
* SHORT-HENT:MODE	3	R	R	RWACD
* BEFORE-COPY:MODE	12	R	RWA	RWACD
* BM-OPERATOR-B05:DOM	673	R	RWA	RWACD
* BM-OPERAT-XX-B05:DOM	156	R	RWA	RWACD
LIST-IMPLEMENTED:PROG	12	R	R	RWACD
ER-S3WD-DESC-D06:EDAT	40	N	RWACD	RWACD
ER-S3WD-LOG-D03:PROG	43	R	R	RWACD
MON-CALL-1B-C01:BRF	4	R	R	RWACD
MON-CALL-2B-C01:BRF	4	R	R	RWACD
MON-CALL-LIB-C01:NRF	6	R	R	RWACD
MON-CALL-NAMES-C:DAT	6	R	R	RWACD
* READ-SEGMENT:MODE	2	R	R	RWACD
* REMOVE-FILES:MODE	1	R	R	RWACD
* PATCH-VERSION:MODE	1	R	R	RWACD
+ MICRO-5830-10210:DATA	144	R	RWA	RWACD
S3-CONFIG-F01:PROG	90	R	R	RWA
SWAPPER-L04:PSEG	23	N	RWAC	RWACD
SWAPPER-L04:DSEG	129	N	RWAC	RWACD
PMA-SCSI-B010:IMAG	249	R	RWA	RWACD
GET-POOL-INFO:JOB	7	R	RWA	RWACD
GET-POOL-CONFIG:JOB	11	R	RWA	RWACD
* AFTER-COPY:MODE	2	R	RWA	RWACD
SINTRAN:DATA	63	N	N	RWACD
MACM-AREA:DATA	64	N	N	RWACD
+ UE-ERMSG-EN-D14:NEW	220	R	RWACD	RWACD
PATCHLIST:OUT	51	N	RWACD	RWACD
PATCH-FILE:OUT	8	N	RWACD	RWACD
PMA-ETH3-TCIPNFS:IMAG	164	R	R	RWACD
LAST-FILE:LAST	0	R	RWA	RWACD
NOTS-SERVICE-D00:PROG	48	R	R	RWA
+ MICRO-5800-B32:DATA	128	R	RWACD	RWACD
+ UE-ERMSG-N0-D14:NEW	221	R	RWACD	RWACD
SOFTICE-A02:DOM	172	R	RWA	RWACD
+ MICRO-7000-B32:DATA	128	RWACD	RWACD	RWACD
+ MICRO-5850-10210:DATA	144	R	RWA	RWACD
+ MICRO-5800-B32:DATA	128	RWACD	RWACD	RWACD
+ MICRO-5400-B32:DATA	128	RWACD	RWACD	RWACD
SYMBOL-1-LIST:SYMB	52	N	RWACD	RWACD
SYMBOL-2-LIST:SYMB	35	N	RWACD	RWACD

Files marked with a star (*) will be deleted after installation.
Files marked with a (+) must be deleted manually (@DELETE-FILE command).

Page 48¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page 48 of 58

Product Name¶

Patch Kit for ND tpServer Platform (211560) Version B

Product Number¶

382300B

SPRINT Spooling System Version A (211056A06, 211583A06, 211495A06)

The file(s) have to be copied to user area SPRINT-USER:¶

File Name	File Size	Public Access	Friend Access	Own Access
IN-PRM-AA-A06:DATA	5	R	RWA	RWACD
IN-PRM-AB-A06:DATA	2	R	RWA	RWACD
IN-PRM-AC-A06:DATA	2	R	RWA	RWACD
IN-PRM-AD-A06:DATA	2	R	RWA	RWACD
IN-PRM-AE-A06:DATA	2	R	RWA	RWACD
IN-PRM-AF-A06:DATA	2	R	RWA	RWACD
IN-PRM-AH-A06:DATA	2	R	RWA	RWACD
IN-PRM-AI-A06:DATA	2	R	RWA	RWACD
IN-PRM-AJ-A06:DATA	2	R	RWA	RWACD
IN-PRM-AK-A06:DATA	1	R	RWA	RWACD
IN-PRM-AL-A06:DATA	1	R	RWA	RWACD
IN-PRM-AP-A06:DATA	1	R	RWA	RWACD
IN-PRM-VI-A06:DATA	1	N	RWAD	RWACD
IN-PRM-A06:PROG	80	N	RWACD	RWACD
IN-PRM-A06:XCOM	15	R	RWACD	RWACD
IN-PRM-A06:INIT	3	N	RWACD	RWACD
SSY-SERVER-A06:PROG	112	R	RWA	RWACD
SSY-MAIN-A06:PROG	128	R	RWA	RWACD
SSY-SECO-A06:PROG	78	R	RWA	RWACD
SSY-PSHA-A06:PROG	43	R	RWA	RWACD
SSYLIB-1B-A06:BRF	82	R	RWA	RWACD
SSYLIB-2B-A06:BRF	85	R	RWA	RWACD
SSYLIB-500-A06:NRF	84	RWACD	RWACD	RWACD
SSYLIB-A06:DEFS	2	R	RWA	RWACD
SSYLIB-A06:H	3	R	RWA	RWACD
SSYLIB-A06:IMPT	1	R	RWA	RWACD
PRM-SERV-AA-A06:PFIL	58	R	RWA	RWACD
PRM-SERV-AA-A06:DFIL	47	R	RWA	RWACD
PRM-SERV-AB-A06:PFIL	58	R	RWA	RWACD
PRM-SERV-AB-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AC-A06:PFIL	59	R	RWA	RWACD
PRM-SERV-AC-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AD-A06:PFIL	60	R	RWA	RWACD
PRM-SERV-AD-A06:DFIL	51	R	RWA	RWACD
PRM-SERV-AE-A06:PFIL	59	R	RWA	RWACD
PRM-SERV-AE-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AF-A06:PFIL	61	R	RWA	RWACD
PRM-SERV-AF-A06:DFIL	53	R	RWA	RWACD
PRM-SERV-AH-A06:PFIL	59	R	RWA	RWACD
PRM-SERV-AH-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AI-A06:PFIL	59	R	RWA	RWACD
PRM-SERV-AI-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AJ-A06:PFIL	56	R	RWA	RWACD
PRM-SERV-AJ-A06:DFIL	49	R	RWA	RWACD
PRM-SERV-AK-A06:PFIL	61	R	RWA	RWACD

Page 49¶

Product Information¶

Product Name: Patch Kit for ND tpServer Platform (211560) version B
Product Number: 382300B

File name	File size	Public access	Friend access	Own access
PRM-SERV-AK-A06:DFIL	51	R	RWA	RWACD
PRM-SERV-AL-A06:PFIL	60	R	RWA	RWACD
PRM-SERV-AL-A06:DFIL	50	R	RWA	RWACD
PRM-SERV-AP-A06:PFIL	59	R	RWA	RWACD
PRM-SERV-AP-A06:DFIL	50	R	RWA	RWACD
VISI-SERVER-A06:PROG	83	R	RWA	RWACD
SETUP-ND708-A06:SYMB	19	R	RWA	RWACD
SETUP-CANON-C06:SYMB	27	R	RWA	RWACD
SETUP-CANON-D01:SYMB	41	R	RWA	RWACD
SSY-UTILITY-A06:PROG	100	R	R	RWACD
SSY-UTILITY-A06:HELP	1	N	R	RWACD
SSY-SET-CPU-N0:PROG	6	R	RWA	RWACD
SSY-PICT-EN-A06:NDPF	35	R	RWA	RWACD
SSY-PICT-EN-A06:CONF	21	R	RWA	RWACD
SSY-PICT-NO-A06:NDPF	34	R	RWA	RWACD
SSY-PICT-NO-A06:CONF	21	R	RWA	RWACD
SSY-PICT-DA-A06:CONF	22	R	RWA	RWACD
SSY-PICT-DA-A06:NDPF	36	R	RWA	RWACD
SSY-DA:MODE	1	N	RWACD	RWACD

The file(s) have to be copied to user area ND-OPERATIONS:

File name	File size	Public access	Friend access	Own access
START-SPRINT:MODE	1	N	RWA	RWACD

Instructions¶

!! Do NOT restart a printer from SPRINT (without investigating first) !!
If a printer gives an error message in SPRINT, check the printer itself.
If no reason for the problem is evident, you may restart the printer.

Unnecessary starting of printers will 'jam' SPRINT, and you may end up with the message 'Sprint is busy'.

Note that OpenLAN printers may sometimes give 'misleading' error messages. If a printer stops due to paper crash or empty input-bin during a printout, the connection will stay open and give one of the messages 'Printer is occupied. Waiting for access' or 'Impossible to send data to printer' when printing from another system. These messages may then also mean paper crash if they do not disappear within reasonable time.

ALWAYS check the printer itself before you do anything else.

ND-896058 EN 2

Page 50¶

Product Information¶

Date	ND ServiceTeam	Page 50 of 58
Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

SIBAS /R version B (211304B06)

The file(s) have to be copied to user area SIBR-B:

File name	File size	Public access	Friend access	Own access
SM-SERVER-AO6:DOM	288	R	R	RWACD
SM-TRMH-AO6:DOM	36	R	R	RWACD
SM-TRMH-DATA-AO6:SEG	5	R	R	RWACD
SM-SIBLINK-AO6:MODE	1	R	R	RWACD
SM-LOAD-AO6:MODE	1	R	R	RWACD
SM-TRMH-LIBR-AO6:NRF	1	R	R	RWACD
SM-OPERATOR-AO6:DOM	326	R	R	RWACD
SM-TEXT-EN-AO6:ERR	6	R	R	RWACD
SM-TEXT-NO-AO6:ERR	6	R	R	RWACD
SM-OPER-EN-AO6:SEG	133	R	R	RWACD
SM-OPER-XX-AO6:SEG	133	R	R	RWACD
SM-OPER-NO-AO6:SEG	133	R	R	RWACD
SM-LANG-EN-AO6:MODE	1	R	R	RWACD
SM-LANG-NO-AO6:MODE	1	R	R	RWACD
SM-START-AO6:MODE	1	R	N	RWACD
SIBAS:DUMP	0	RWACD	RWACD	RWACD
SIBR-DBC-AO8:PROG	95	R	R	RWACD
SIBRP-BO6:SEG	338	R	RWACD	RWACD
SIBR-LIBRARY-BO6:ENTR	14	R	RWACD	RWACD
SIBR-FAST-BO6:SEG	129	R	RWACD	RWACD
SIBRP-USTAB-BO6:SEG	3	R	RWACD	RWACD
SIB1LB-BO6:IMPT	17	R	RWACD	RWACD
SIBR-LIB-1B-BO6:BRF	31	R	RWA	RWACD
SIBR-LIB-2B-BO6:BRF	31	R	RWA	RWACD
SIBR-LIB-N-BO6:NRF	396	R	RWACD	RWACD
SIBRP-COMMON-BO6:SEG	17	R	RWACD	RWACD
SW-CONFIG:SYMB	23	R	RWACD	RWACD
SIBRC-BO6:OUT	1	R	RWACD	RWACD
SIBRC-BO6:ENTR	2	R	RWACD	RWACD
SIBRC-BO6:PROG	125	R	RWACD	RWACD
SIBRC-UTIL-BO6:PROG	52	R	RWACD	RWACD
SIBRC-BO6:DUMP	1	R	RWACD	RWACD
SIBCOM-MONIT-BO6:DOM	95	R	RWACD	RWACD
SIBR-INTR-EN-BO6:ERR	6	R	RWACD	RWACD
SIBR-M-SERV-BO6:PROG	74	R	RWACD	RWACD
SIBR-LIBRARY-BO6:SEG	113	R	RWACD	RWACD
SIBR-INTER-BO6:DOM	178	R	RWACD	RWACD
SIBRP-500-BO6:ENTR	22	R	RWACD	RWACD
FAST-VERIFY:MCRO	2	R	RWACD	RWACD
SIB1LB-MSG-GEN:DOM	49	R	RWACD	RWACD
SIBRP-CURBUL-BO6:SEG	3	R	RWACD	RWACD
SIBRP-DUMMY-BO6:SEG	3	R	RWACD	RWACD
SIBRP-IOBUF-BO6:SEG	3	R	RWACD	RWACD
SIBRP-SIFT-C:SEG	4	R	RWACD	RWACD

ND-896058 EN 2

Page 51¶

Product Information¶

Patch Kit for ND tpServer Platform (211560) Version B¶

Product Number: 382300B

File name	File size	Public access	Friend access	Own access
SIBR-DBM-COM-B06:SEG	9	R	RHWACD	RHWACD
SIBRP-NUCL:NRF	3	R	RHWACD	RHWACD
SIBRP-B06:DOM	2	R	RHWACD	RHWACD
SIBR-DBM-B06:DOM	628	R	RHWACD	RHWACD
SIBRS-B06:ENTR	6	R	RHWACD	RHWACD
SIBR-DRL-COM-B06:SEG	8	R	RHWACD	RHWACD
SIBR-DRL-B06:DOM	251	R	RHWACD	RHWACD
SIBR-DBM-SYN-B06:OBJ	37	R	RHWACD	RHWACD
SIBR-DBM-B06:ENTR	35	R	RHWACD	RHWACD
DRL-SORTTAB-B06:DOM	15	R	RHWACD	RHWACD
SIBR-SERVICE-B06:ENTR	18	R	RHWACD	RHWACD
SIBR-DBC-B06:SEG	8	R	RHWACD	RHWACD
SIBR-FAST-B06:DOM	17	R	RHWACD	RHWACD
SIBR-DRL-B06:ENTR	20	R	RHWACD	RHWACD
SIBR-LOOKLOG-B06:PROG	71	R	RHWACD	RHWACD
SIBR-DPA-B06:PROG	44	R	RHWACD	RHWACD
SIBR-DBC-B06:DOM	138	R	RHWACD	RHWACD
SIBR-SERVICE-B06:DOM	257	R	RHWACD	RHWACD
SIBR-LGAMSA-B06:DATA	33	R	RHWACD	RHWACD
SIBRP-SQL-B06:SEG	560	R	RHWACD	RHWACD
SIBR-DEBUG-00:SYMB	2	R	RHWACD	RHWACD
SIBRR-B06:PROG	76	R	RHWACD	RHWACD
SIBCOM-START-B06:MODE	1	R	RHWACD	RHWACD
SIBCOM-LOAD-B06:MODE	1	R	RHWACD	RHWACD
SIBRS-B06:DOM	96	R	RHWACD	RHWACD

DOMINO Maintenance Kit Version D (211322D02)¶

The file(s) have to be copied to user area TEST-USER:

File name	File size	Public access	Friend access	Own access
DISK-MM-TP-D02:TEST	38	R	RWA	RHWACD
DISK-MME1T-D02:NEXT	11	R	RWA	RHWACD
DISK-MME2T-D02:NEXT	11	R	RWA	RHWACD
DISK-MMC1T-D02:NEXT	6	R	RWA	RHWACD
DISK-MMC2T-D02:NEXT	6	R	RWA	RHWACD
DISK-MMC3T-D02:NEXT	6	R	RWA	RHWACD
DISK-MMC4T-D02:NEXT	6	R	RWA	RHWACD
DISK-MMC5T-D02:NEXT	6	R	RWA	RHWACD
DISK-MMC6T-D02:NEXT	6	R	RWA	RHWACD

Page 52¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page 52 of 58

Product name
Patch Kit for ND tpServer Platform (211560) version B

Product number
382300B

User-Environment version D (210518D07):

File name	File size	Public access	Friend access	Own access
UE-PMAN-EN-D07:NDPF	34	R	RWACD	RWACD
UE-PMAN-EN-D07:CONF	30	R	RWACD	RWACD
UE-HIERAR-EN-D07:MENU	23	R	RWACD	RWACD
UE-LOGIN-EN-D07:CONF	8	R	RWACD	RWACD
UE-FUNC-EN-D07:NDPF	26	R	RWACD	RWACD
UE-FUNC-EN-D07:CONF	14	R	RWACD	RWACD
UE-STDHIE-EN-D07:NDPF	17	R	RWACD	RWACD
UE-STDHIE-EN-D07:CONF	8	R	RWACD	RWACD
UE-PMAN-NO-D07:NDPF	35	R	RWACD	RWACD
UE-CH-LAMUD-07:PROG	4	R	RWACD	RWACD
UE-ME-EN-D07:NDPF	32	R	RWACD	RWACD
UE-ME-EN-D07:CONF	15	R	RWACD	RWACD
UE-ACTIV-EN-D07:RPRT	10	R	RWACD	RWACD
UE-PMAN-NO-D07:CONF	30	R	RWACD	RWACD
UE-LOGIN-NO-D07:CONF	8	R	RWACD	RWACD
UE-ME-NO-D07:NDPF	31	R	RWACD	RWACD
UE-ME-NO-D07:CONF	15	R	RWACD	RWACD
UE-FUNC-NO-D07:NDPF	27	R	RWACD	RWACD
UE-FUNC-NO-D07:CONF	14	R	RWACD	RWACD
UE-STDHIE-NO-D07:NDPF	17	R	RWACD	RWACD
UE-STDHIE-NO-D07:CONF	8	R	RWACD	RWACD
UE-ACTIV-NO-D07:RPRT	10	R	RWACD	RWACD
UE-HIERAR-NO-D07:MENU	24	R	RWACD	RWACD
UE-RSTAT-NO-D07:TEXT	6	R	RWACD	RWACD
UE-RSTAT-EN-D07:TEXT	6	R	RWACD	RWACD
UE-PLIB-P1-D07:BRF	66	R	RWAC	RWACD
UE-PSER-DUMP-D07:MODE	1	R	RWACD	RWACD
NDP-COMPILER-E:PROG	35	R	RWACD	RWACD
UE-ST-LAMU-D07:PROG	3	R	RWACD	RWACD
UE-PLIB-D1-D07:BRF	3	R	RWAC	RWACD
UE-PLIB-P2-D07:BRF	69	R	RWAC	RWACD
UE-PLIB-D2-D07:BRF	3	R	RWAC	RWACD
UE-PLIB-P5-D07:NRF	66	R	RWAC	RWACD
UE-PLIB-D5-D07:NRF	3	R	RWAC	RWACD
UE-PLIBTEST-D07:PROG	98	R	RWACD	RWACD
UE-PLIB-D07:IMPT	4	R	RWACD	RWACD
UE-PLIB-D07:DEFS	8	R	RWACD	RWACD
UE-PSER-MAIN-D07:PROG	81	R	RWACD	RWACD
UE-PSER-BASE-D07:PROG	75	R	RWACD	RWACD
UE-PSER-DATA-D07:PROG	46	R	RWACD	RWACD
UE-DB-CONV-D07:PROG	82	R	RWACD	RWACD
UE-LOGIN-D07:PROG	82	R	RWACD	RWACD
UE-MEMAIN-D07:PROG	125	R	RWACD	RWACD
UE-MENU-D07:PROG	1	R	RWACD	RWACD

ND-896058 EN 2

Page 53¶

Product Information¶

Product name

Patch Kit for ND tpServer Platform (211560) version B

Product number

382300B

File name	File size	Public access	Friend access	Own access
UE-MEUTIL-D07:PROG	78	R	RWACD	RWACD
UE-RUN-D07:PROG	127	R	RWACD	RWACD
UE-EX-VER-D07:PROG	88	R	RWACD	RWACD
UE-PMAN-MAIN-D07:PROG	117	R	RWACD	RWACD
UE-PMAN-EXT1-D07:PROG	76	R	RWACD	RWACD
UE-PMAN-EXT2-D07:PROG	46	R	RWACD	RWACD
UE-FUNC-MAIN-D07:PROG	113	R	RWACD	RWACD
UE-FUNC-EXT-D07:PROG	69	R	RWACD	RWACD
UE-LOAD:MODE	1	R	RWACD	RWACD
UE-CHCPU-D07:PROG	96	R	RWACD	RWACD
WAIT-FOR-UE-D07:PROG	16	R	RWACD	RWACD
UE-PATCH-D07:MODE	2	R	RWACD	RWACD
UE-TP-PATCH-D07:MODE	1	R	RWACD	RWACD
UE-D-SIP-D07:PROG	77	N	RWACD	RWACD
UE-NORWEGIAN:MODE	1	R	RWACD	RWACD
UE-ENGLISH:MODE	1	R	RWACD	RWACD
UE-DANISH:MODE	1	R	RWACD	RWACD

Every terminal using the menu system uses ONE System LAMU.

Backup Manager for ND ND-500/5000 version B (211226B05)

The file(s) have to be copied to user area BACKUP-MANAGER:

File name	File size	Public access	Friend access	Own access
BM-OPERATOR-B05:DOM	702	R	RHACD	RWACD
BM-FILERESTO-B05:DOM	517	R	RWACD	RWACD
BM-SCHEDULER-B05:DOM	177	R	RWACD	RWACD
BM-DEFINITION-B05:DOM	342	R	RWACD	RWACD
BM-SERVER-B05:MODE	1	N	RWACD	RWACD
BM-DUMP-B05:MODE	1	N	RWACD	RWACD
BM-START-B05:MODE	1	N	RWACD	RWACD
BM-SERVER-B05:PROG	105	N	RWACD	RWACD
BM-DEFINI-XX-B05:SEG	108	R	RWACD	RWACD
BM-OPERAT-XX-B05:SEG	156	R	RWACD	RWACD
BM-FILERE-XX-B05:SEG	68	R	RWACD	RWACD
BM-SCHED-XX-B05:SEG	108	R	RWACD	RWACD

The file(s) have to be copied to user area ND-OPERATIONS:

File name	File size	Public access	Friend access	Own access
BM-FILERE-PARA:DATA	1	R	RWACD	RWACD

ND-896058 EN 2

Page 54¶

Product Information¶

Date: 92.06.15
Page: 54 of 58
ND ServiceTeam

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

NOTIS-DS for ND-500/5000 version E (210794E04)¶

The file(s) have to be copied to user area DS-PROGRAMS:

File name	File size	Public access	Friend access	Own access
NOTIS-DS-NO-E04:DOM	343	R	RWACD	RWACD
NOTIS-DS-NO-E04:SEG	180	R	RWACD	RWACD
DS-DSERVER-E04:DOM	576	R	R	RWACD
DS-INITDB-E04:DOM	90	R	R	RWACD
DS-ACCOUNT-E04:DOM	155	R	R	RWACD
DS-CONVERT-E04:DOM	236	R	R	RWACD
DS-CONVERT-E04:SEG	122	R	R	RWACD
DS-EMSTART-E04:MODE	1	R	RWACD	RWACD
DS-EMSTOP-E04:MODE	1	R	RWACD	RWACD
DS-EMSERVICE-E04:PROG	41	R	R	RWACD
DS-EM-500-E04:PROG	24	R	R	RWACD
DS-EM-LOAD-E04:MODE	1	R	RWACD	RWACD
NOTIS-DS-EN-E04:DATA	62	R	RWACD	RWACD
NOTIS-DS-E04:MODE	1	R	RWACD	RWACD
DS-DOCREC-E04:SEG	178	R	RWACD	RWACD
DS-DSERVER-E04:MODE	1	R	RWACD	RWACD
DS-DOCREC-E04:DOM	598	R	RWACD	RWACD
DS-INITDB-E04:MODE	1	R	RWACD	RWACD
DS-ACCOUNT-E04:MODE	1	R	RWACD	RWACD
DS-CONVERT-E04:MODE	1	R	RWACD	RWACD
DS-MAKE-DB-E04:MODE	1	R	RWACD	RWACD
REDEF-IX:MODE	1	R	RWACD	RWACD
REDEF-IX-DSBASE:DRL	1	R	RWACD	RWACD
DS-DEFINE-E04:DOM	107	R	R	RWACD
DS-DEFINE-E04:DRL	4	R	RWACD	RWACD

SPEC-MODIF-PATCH:¶

The file(s) have to be copied to user area SPEC-MODIF-PATCH:

File name	File size	Public access	Friend access	Own access
SM-PF-LIBR-7400:FADM	1	R	RWACD	RWACD
SM-SYMBOLS-7400:FADM	1	R	RWACD	RWACD
SM-REFEREN-7400:FADM	1	R	RWACD	RWACD
SM-PATCHES-7400:PATC	11	R	RWACD	RWACD
SM-PATCH-007400:SEL	5	R	RWACD	RWACD
SM-PATCH:PROG	21	R	RWACD	RWACD
SM-START-PA-FILE:MODE	1	R	RWACD	RWACD
SM-PATCH-FILE:MODE	3	R	RWACD	RWACD

ND-896058 EN 2

Page 55¶

Product Information¶

Date: 92.06.15
Service Team: ND ServiceTeam
Page: 55 of 58

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

Multi-Machine Operator Environment (211078A01)¶

The file(s) have to be copied to user area OE-USER:

File name	File size	Public access	Friend access	Own access
DOMI-MONITOR-14D:DOM	272	R	RWACD	RWACD
FM-SIN-EN-C03:PROG	86	R	RWACD	RWACD
DOMI-MAILBOX-14D:SEG	12	R	R	RWACD
OEM-STATU-A01:DOM	441	R	RWACD	RWACD
FM-SIN-NO-C03:PROG	86	R	RWACD	RWACD
OE-LOAD:MODE	1	N	RWACD	RWACD
FILE-MAN-EN-C03:PROG	118	R	RWACD	RWACD
FILE-MAN-NO-C03:PROG	118	R	RWACD	RWACD
FM-PICS-NO-C03:NDPF	63	R	RWACD	RWACD
FM-PICS-EN-C03:NDPF	62	R	RWACD	RWACD
TCPIP-MONIT-D00:PROG	84	R	RWA	RWACD
NK-MON-C05:DOM	104	R	RWACD	RWACD

TCP/IP Basic Module III version D (211327D00)¶

The file(s) have to be copied to user area TCP-IP:

File name	File size	Public access	Friend access	Own access
FTPRT-D00:PROG	26	N	R	RWACD
FTP-SERV-BA-B05:PROG	96	N	RWACD	RWACD
REBOOT-SLOT-D00:PROG	11	N	R	RWACD
STOP-SLOT-D00:PROG	11	N	R	RWACD
DEFINE-TCPD-D00:MODE	1	N	R	RWACD
DEFINE-FTPRT-D00:MODE	1	N	R	RWACD
TCPD-D00:PROG	53	N	R	RWACD
TCP-BA-LOAD-D00:MODE	1	N	RWACD	RWACD
TCP-BA-REBO-B:MODE	1	N	RWACD	RWACD
TCP-BA-STOP-B:MODE	1	N	RWACD	RWACD
FTP-CLIENT-D01:PROG	62	N	RWACD	RWACD
TELNET-CLIEN-D01:PROG	53	N	RWACD	RWACD

Page 56¶

Product Information¶

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

SINTRAN III/VSX Version M, Revision 7400 (250306M06 + 250360M09)¶

The file(s) have to be copied to user area RT:

File name	File size	Public access	Friend access	Own access
S3SFSEGMENT:BPUN	54	R	R	RWACD
S3SCPSGEMENT:BPUN	54	R	R	RWACD
S3SRPITSEGMENT:BPUN	52	R	R	RWACD
S3SMIPSSEGMENT:BPUN	52	R	R	RWACD
S3SGSTSEGMENT:BPUN	17	R	R	RWACD
S3SPPSSEGMENT:BPUN	2	R	R	RWACD
S3SDPITSEGMENT:BPUN	6	R	R	RWACD
S3SDITSEGMENT:BPUN	46	R	R	RWACD
S3SYSYSEGMENT:BPUN	4	R	R	RWACD
S3SECOSEGMENT:BPUN	3	R	R	RWACD
S3SMPSSEGMENT:BPUN	49	R	R	RWACD
S3SPIITSEGMENT:BPUN	52	R	R	RWACD
S3SMSESEGMENT:BPUN	37	R	R	RWACD
S3SDWSEGMENT:BPUN	5	R	R	RWACD
S3SXRMKSEGMENT:BPUN	32	R	R	RWACD
S3SXROUSEGMENT:BPUN	34	R	R	RWACD
S3SDNAMSEGMENT:BPUN	7	R	R	RWACD
S3SXMFISEGMENT:BPUN	55	R	R	RWACD
S3SNKSEGSEGMENT:BPUN	53	R	R	RWACD
S3SNKNASEGMENT:BPUN	65	R	R	RWACD
S3SUI10SEGMENT:BPUN	33	R	R	RWACD
S3SUI20SEGMENT:BPUN	33	R	R	RWACD
S3SERWSEGMENT:BPUN	53	R	R	RWACD
S3SERWDSEGMENT:BPUN	57	R	R	RWACD
S3SPRMASEGMENT:BPUN	53	R	R	RWACD
S3SPWRSEGMENT:BPUN	53	R	R	RWACD
S3SBOPCSEGMENT:BPUN	53	R	R	RWACD
S3SMTSESEGMENT:BPUN	5	R	R	RWACD

These files will be deleted after installation.

NUCLEUS Maintenance Kit Version C (211321C03)¶

The file(s) have to be copied to user area TEST-USER:

File name	File size	Public access	Friend access	Own access
NKS5000-C03:DOM	96	R	RWACD	RWACD
DEVICE-TEST:DOM	764	R	RWACD	RWACD

ND-896058 EN 2

Page 57¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 57 of 58

Product Details¶

Product name	Product number
Patch Kit for ND tpServer Platform (211560) version B	382300B

DSS Test Programs version D (211481D01)¶

The file(s) have to be copied to user area TEST-USER:

File name	File size	Public access	Friend access	Own access
SCSI-TV-TP-D01:TEST	37	R	RWA	RWA CD
SCSI-TVEOT-D01:NEXT	11	R	RWA	RWA CD
SCSI-TVE2T-D01:NEXT	11	R	RWA	RWA CD
SCSI-TVC1T-D01:NEXT	14	R	RWA	RWA CD
SCSI-TVD0T-D01:NEXT	14	R	RWA	RWA CD
SCSI-TVD1T-D01:NEXT	14	R	RWA	RWA CD
SCSI-TVD2T-D01:NEXT	14	R	RWA	RWA CD
SCSI-TVD3T-D01:NEXT	14	R	RWA	RWA CD

DSS Basic System version A (211479A09)¶

The file(s) have to be copied to user area SCSI-DOMINO:

File name	File size	Public access	Friend access	Own access
BDIO:DOM	249	N	RHACD	RHACD
STORAGE-ADMIN:DOM	160	R	RHACD	RHACD

OWS Access Server for ND-5000 version B (211325B04)¶

The file(s) have to be copied to user area OPENLAN:

File name	File size	Public access	Friend access	Own access
OWSACCSERV-B04:DOM	116	RWACD	RWACD	RWACD

ND-896058 EN 2

Page 58¶

Product Information¶

Date: 92.06.15
ND ServiceTeam
Page: 58 of 58

Product name: Patch Kit for ND tpServer Platform (211560) version B
Product number: 382300B

ND-500/5000 System Package for SINTRAN III version M version C (211305C04)¶

The file(s) have to be copied to user area BASIC-FILES:

File name	File size	Public access	Friend access	Own access
ND-500-MON-K02:PROG	154	R	R	RWA

Backup System version I (210337I06)¶

The file(s) have to be copied to user area BASIC-FILES:

File name	File size	Public access	Friend access	Own access
BACKUP-LOAD-I:MODE	2	R	RWACD	RWACD
BACKUP-SERV-I06:PROG	59	R	RWACD	RWACD

PED for ND-500/5000 (English) version K (210532K)¶

The file(s) have to be copied to user area BASIC-FILES:

File name	File size	Public access	Friend access	Own access
PED-500-ENG-K:DOM	114	R	RWA	RWACD

File System Verification version A (211073B00)¶

The file(s) have to be copied to user area OE-USER:

File name	File size	Public access	Friend access	Own access
OEV-VERIF-BOO:DOM	274	R	RWA	RWACD
OEV-VERIF-EN-BOO:DATA	56	R	RWA	RWACD
OEV-VERIF-NO-BOO:DATA	56	R	RWA	RWACD

	0	1	2	3	4	5	6	7	8	9
0	A	A	A	A	A	A	A	A	A	A
10	C	A	A	A	A	A	A	A	A	A
20	A	A	B	C	A	B	A	A	A	A
30						A				A
40	A	A	A	A		A			A	A
50	A	A	A	A	A	A	A	A	A	A
60	A	A		A		A				A
70						A
80	A			A	B				A
90		A	A	A	A	A	A	A	A	A
100	A	A	A	A		B	A	A	A	B
110		A		A		A	A	A	A	A
120	A	B	A		A	A		A	A	A
130		A	A	A		A	A	A	A	B
140		A	A	B		A	B		A	B
150	A		A		A	A	A	B	A
160	A	A		A	A	A		A	A	B
170		A	A	A		A			A	A
180		A	B	A		A				A

User area	Free Pages	Free File Entries
PACK-BASIC-BOO:RT	1100	-
PACK-BASIC-BOO:SYSTEM	1650	16

	0	1	2	3	4	5	6	7	8	9
0	A	A	A	A	A	A	A	A	A	A
10	C	A	A	A	A	A	A	A	A	A
20	A	A	B	C	A	B	A	A	A	A
30						A				A
40	A	A	A	A		A			A	A
50	A	A	A	A	A	A	A	A	A	A
60	A	A		A		A				A
70						A
80	A			A	B				A
90		A	A	A	A	A	A	A	A	A
100	A	A	A	A		B	A	A	A	B
110		A		A		A	A	A	A	A
120	A	B	A		A	A		A	A	A
130		A	A	A		A	A	A	A	B
140		A	A	B		A	B		A	B
150	A		A		A	A	A	B	A
160	A	A		A	A	A		A	A	B
170		A	A	A		A			A	A
180		A	B	A		A				A

	0	1	2	3	4	5	6	7	8	9
0	A	A	A	A	A	A	A	A	A	A
10	C	A	A	A	A	A	A	A	A	A
20	A	A	B	C	A	B	A	A	A	A
30						A				A
40	A	A	A	A		A			A	A
50	A	A	A	A	A	A	A	A	A	A
60	A	A		A		A				A
70						A
80	A			A	B				A
90		A	A	A	A	A	A	A	A	A
100	A	A	A	A		B	A	A	A	B
110		A		A		A	A	A	A	A
120	A	B	A		A	A		A	A	A
130		A	A	A		A	A	A	A	B
140		A	A	B		A	B		A	B
150	A		A		A	A	A	B	A
160	A	A		A	A	A		A	A	B
170		A	A	A		A			A	A
180		A	B	A		A				A