Page 1¶

Norsk Data A/S¶

PROGRAM DESCRIPTION¶

Date	87.06.22	Page 1 of 5
Product	Reg. no.	Category
Name	210839L	STNC
NORTEXT-100 VIDEOSETTER V Output Module

Reason¶

[x] New product
[ ] Change/Addition
[ ] Other:
[ ] Error Correction
[ ] Different Environment

Documentation¶

Title	Reg. no.
NORTEXT-100 Typesetter Modules	61.032.1 EN

Purpose¶

Control the typesetters: VIDEOSETTER V.

Prerequisites¶

Computer	Type	Floating format	Op. system	Version
ND-100	CX	SIN III VSX	>=J
or ND-500

ND-no.	Product name
210800L	NORTEXT-100 Editor (for TS)
210802L	NORTEXT-100 Basic RT (for RT)
253	If
830	Adapter
Special	Cable adapter - Videosetter V

Minimum mass storage resources for installation¶

User	Userspace	Number of files
SYSTEM	10 pages	1 files

Minimum mass storage resources permanent¶

User	Userspace	Number of files
RELEASE-NTX	250 pages	3 files (ND-100)
RELEASE-NTX	250 pages	4 files (ND-500)
WORKFILES-NTX	40 pages	1 files
USERFILES-NTX	12 pages	1 files
REALTIME-NTX	110 pages	3 files
PARAMETERS-NTX	3 pages	1 files

Max/Min number of RT-descriptions: (n) Max 99 Min 1
Max/Min number of segments: Max 198 Min 2
Space requirements on segment file(s) is 15+32*n pages

Directory Information¶

User Name: FLOPPY-USER¶

File Name	Type	Containing
INSTALL-	XCOM	Installation commands
FO-INSTALL	XCOM	Installation commands

User Name: RELEASE-NTX¶

File Name	Type	Containing
VIDEO-FO-	PROG	Program
VIDEO-FO-	ENTR	Data references
TOFOTO-VIDEO	PROG	Program

Reg. no. for Source: 250041L

ooo ND Norsk Data ooo
Scanned by Jonny Oddene for Sintran Data © 2011

Page 2¶

Norsk Data A/S¶

PROGRAM DESCRIPTION¶

Date	Page 2 of 5
87.06.22

Product¶

Name	Reg. no.	Category
NORTEXT-100 VIDEOSETTER V Output Module	210839L	STNC

Directory Information¶

Directory Name: 210839L-XX-01D¶

User Name: REALTIME-NTX¶

File Name	Type	Containing
VIDEO-FO-	SEGP	RT-program
VIDEO-FO-	SEGD	RT-program data part
VIDEO-FO-	ENTR	RT-program addresses
BUILD-FO-	XCOM	Installation commands

Directory Name: 210839L-XX-01D¶

User Name: PARAMETERS-NTX¶

File Name	Type	Containing
FOTO01-PARAM-	NTXP	Parameters

Directory Name: 210839L-XX-01D¶

User Name: USERFILES-NTX¶

File Name	Type	Containing
VIDEO-100	DATA	Photosetter data

Directory Name: 210839L-XX-01D¶

User Name: WORKFILES-NTX¶

File Name	Type	Containing
VIDEO-100	FORM	FOCUS forms

Directory Name: 210839L-XX-02D¶

User Name: FLOPPY-USER¶

File Name	Type	Containing
INSTALL-500-FO	XCOM	Install.commands ND-500
DESCRIPTION-FILE	DESC	Description file
SCRATCH-FILE	LINK	Dummy file
SCRATCH-FILE	DSEG	Dummy file
SCRATCH-FILE	PSEG	Dummy file
VIDEO-FO-	LINK	Link file
VIDEO-FO-	DSEG	Data segment
VIDEO-FO-	PSEG	Program segment

ERRORS CORRECTED:¶

All known errors corrected.

NEW FEATURES:¶

Output to spooling devices may now be defined for typesetter output modules. Details in the parameter file.
The time sharing version of the output module may now be installed on an ND-100 or ND-500.
A new parameter {COLSPACE} in the parameter file specifies the minimum space between articles when optimized output is produced. (The parameter COLWIDTH specifies the distance from the start of one column to the start of the next.)

ooo ND Norsk Data ooo
Scanned by Jonny Odden from Sintran Data © 2011

Page 3¶

Program Description¶

Date: 87.06.22
Company: Norsk Data A/S
Page: 3 of 5

Product	Reg. no.	Category
NORTEXT-100 VIDEOSETTER V Output Module	210839L	STNC

The control block:
The new fields "Extra Leading" must be initialized. Set them to -1 if you have no other well-founded ideas.

Photosetter info table, page 6:
Control old and update new information.

Updated with all new features in the justification module. See NORTEXT Release Information, L-version.

Installation Procedure¶

Note:
This installation procedure requires BACKUP-SYSTEM version F or later.

If you want to preserve any :PROG, :SEGP, or :SEGD files from your "old system" do make backup copies now. If your "old system" was the NORTEXT J-version the "old files" are of type :BPUN. Please remember to delete these files before continuing the installation procedure. Log in as user REALTIME-NTX and type:
```
@DELETE-USERS-FILES --FO: YES--
```
Log in as user SYSTEM.
Put the installation floppy in the floppy drive and enter it with:
```
@ENTER-DIRECTORY,<FLOPPY-DISC-<drive-no.>,<floppy-unit>>
```
Start the installation by typing:
```
@X (210839: FLOPPY-USER)INSTALL
```
This XCOM file will copy all files from the floppy to the actual users on disk. Note: All the old :PROG, :SEGP, and :SEGD files will be deleted before copying takes place.
If this product has been installed earlier and the :FORM file is found in your system, you will be asked if you want the new form file installed (and the old one deleted). The only reason to prevent the new form file being installed should be if you already have translated the texts in the formfile. The form file in this release are with English texts only.
The same procedure will be used for the TABFIL (the data file for the fotosetter), and for the parameterfile. These files are custom dependent and should not be replaced by the new ones unless the datastructure has been changed.
This installation job will start the customizing procedure, i.e. (REALTIME-NTX)CUSTOMIZ-NTX:XCOM will be started. You will then have to answer the questions concerning the fotosetter. The customizing procedure results in a NORTEXT system definition file called DEFINE-NORTEXT:XCOM.

000  ND Norsk Data  000

Page 4¶

Norsk Data A/S Program Description¶

Date: 87.06.22
Page: 4 of 5

Product	Reg. no.	Category
Name
NORTEXT-100	210839L	STNC
VIDEOSETTER V Output Module

Instructions¶

6) Make a hardcopy of the definition file: DEFINE-NORTEXT:XCOM. This will give you information of what your system contains, and may be helpful later.

@COPY-FILE LINE-PRINTER (REALTIME-NTX)DEFINE-NORTEXT:XCOM

7) When the installation job is finished, the directory will be released and the floppy may then be removed.

8) Log out and log in as user PARAMETERS-NTX.
The fotosetter programs (lines) in NORTEXT need parameter files. The parameter files contain device numbers, conversion table numbers, constants and strings necessary for the individual RT-programs. The naming convention for these files is:

FOTON-PARAM:NTXP
nn = 01, 02, 03 and so on.

Multiple parameter files for the same type of lines may be created with the CREATE-PARAM:XCOM

@X_CREATE-PARAM

Carefully inspect and edit each and every file under this user to make sure that all parameters have the right value. NOTE: The typesetter parameter files are in 16-bits format, and must be edited by use of the NORTEXT editor.

9) Log out and in as user SYSTEM.
You are now ready to build the real-time part of NORTEXT. The real-time part of NORTEXT will be built according to the answers you gave during the customize dialog. Each subsystem is built by its own BUILD-file called BUILD-XX:XCOM. You may build individual subsystems if necessary without changing the rest of the system. First, you must make sure that the corresponding RT-programs (lines) in question are not running.

10) Build the photo-typesetter output lines by typing:

```
@X_BUILD-FO
```

Photo typesetter output modules will be built as specified in DEFINE-NORTEXT:XCOM.

Page 5¶

Norsk Data A/S Program Description¶

Date	Page
87.06.22	5 of 5

Product	Reg. no.	Category
Name	210839L	STNC
NORTEXT-100 VIDEOSTETTER V Output Module

Questionnaire¶

HELP YOURSELF BY HELPING US!!

Did you have any problems understanding these PD-sheets?

Have you found any errors?

Do you miss any information?

Please let us know!

Make your comments on this page and mail it to:

ND Comtec R&D
Postbox 78
N-7001 Trondheim
NORWAY

Your Comments:¶

[Photo: Page bottom with "ooo ND Norsk Data ooo"]

Page 6¶

ND Software Library Diskette¶

Page 1¶

Directory Name¶

210839L05-XX-01D

Containing¶

NORTEXT-100
VIDEOSETTER V Output Module

User Name: FLOPPY-USER¶

No	File name	Type T	Public	Friend	Own	Pages	Bytes
0	INSTALL-VIDEO	XCOM I	R	RWA	RWACD	2	967
1	FO-INSTALL-L02	XCOM I	R	RWA	RWACD	6	9610

2 files using 8 pages. 9 pages reserved out of 610 pages.

User Name: RELEASE-NTX¶

No	File name	Type T	Public	Friend	Own	Pages	Bytes
0	VIDEO-FO-L06	PROG I	R	RWACD	RWACD	174	395264
1	VIDEO-FO-L06	ENTR I	R	RWACD	RWACD	8	14080
2	TOFOTO-VIDEO	PROG I	R	R	RWACD	12	266240

3 files using 194 pages. 195 pages reserved out of 610 pages.

User Name: REALTIME-NTX¶

No	File name	Type T	Public	Friend	Own	Pages	Bytes
0	BUILD-FO-L04	XCOM I	RWACD	RWACD	RWACD	4	4870
1	VIDEO-FO-L06	SEGP I	RWACD	RWACD	RWACD	62	124416
2	VIDEO-FO-L06	SEGD I	RWACD	RWACD	RWACD	34	66048
3	VIDEO-FO-L06	ENTR I	RWACD	RWACD	RWACD	8	13672

4 files using 108 pages. 109 pages reserved out of 610 pages.

  ┌───────────────────┐
  │     CONTINUED     │
  └───────────────────┘

Page 7¶

ND Software Library Diskette¶

Page 2¶

Containing:¶

NORTEXT-100
VIDEOSETTER V Output Module

Directory Name¶

210839L05-XX-01D

User Name: USERFILES-NTX¶

No	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	VIDEO-100	DATA	C	RWACD	RWACD	RWACD	12	24576

1 file using 12 pages. 13 pages reserved out of 610 pages.

User Name: WORKFILES-NTX¶

No	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	VIDEO-100-K01	FORM	C	RWACD	RWACD	RWACD	40	81920

1 file using 40 pages. 42 pages reserved out of 610 pages.

User Name: PARAMETERS-NTX¶

No	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	FOTO01-PARAM-L06	NTXP	I	R	RWA	RWACD	4	2351

1 file using 4 pages. 5 pages reserved out of 610 pages.

Total:¶

12 files using 366 pages. 373 pages reserved out of 610 pages.

Page 8¶

ND Software Library Diskette¶

Page: 1

Containing:¶

NORTEXT-100
VIDEOSETTER V Output Module

Directory Name: 210839L05-XK-02D

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	INSTALL-500-FO	XCOM	I	R	RWA	RWACD	3	4060
1	DESCRIPTION-FILE	DESC	I	R	R	RWACD	9	22528
2	SCRATCH-SEG-01	LINK	I	RWACD	RWACD	RWACD	1	0
3	SCRATCH-SEG-01	DSEG	I	RWACD	RWACD	RWACD	2	1029
4	SCRATCH-SEG-01	PSEG	I	RWACD	RWACD	RWACD	2	5
5	VIDEO-FO-L06	LINK	I	RWACD	RWACD	RWACD	165	335073
6	VIDEO-FO-L06	DSEG	I	RWACD	RWACD	RWACD	141	286267
7	VIDEO-FO-L06	PSEG	I	RWACD	RWACD	RWACD	121	244718

8 files using 444 pages. 444 pages reserved out of 610 pages.