Page 1

Program Description

Date: 87.10.02
Norsk Data A.S
Page: 1 of 14

Product

Name	ND no.	Category
NOTIS-DRAW for ND-100	211019B	STPR
32 bits floating format

Reason

• [x] New product
• [ ] Error Correction
• [x] Change/Addition
• [ ] Different Environment
• Other: ....................................

Documentation

Title	ND-no.
NOTIS-DRAW User Guide	63.045.2 EN
NOTIS-DRAW Quick reference card	99.039.2 EN
NOTIS-DRAW Brukerveiledning	63.045.2 NO
NOTIS-DRAW Oppslagskort	99.039.2 NO

Purpose

General purpose graphic editor.

Prerequisites

Computer	Type	Floating format	Op. system	Version
ND-100	32 bits	SIN III VS	>= J

ND-no.

ND-no.	Product name	Version
	BATCH-PROCESSOR

Additional Devices

ND-no.	Product name
103240	Display Terminal TDV 2200/S with Graphic Option > = V1.5
110004	NOTIS Terminal TDV 2200, Black & White with graphics
110143	NOTIS Terminal TDV 1200, with graphics
110215	Display terminal NOKIA
104480	Multifunction Printer with 6 fonts, Philips GP 300 L
104760	Page Printer, Philips ELPHO 20
110143	ND Matrix Printer 616CM
102180	6 Pen Color Plotter HP - 7475 A
110261	8 Pen Color Plotter HP - 7550 A

Minimum Mass Storage Resources for Installation

User	Userspace	Number of files
SYSTEM	330 pages	9 files
NOTIS	120 pages	7 files
program user	360 pages	6 files

Minimum Permanent Mass Storage Resources

User	Userspace	Number of files
SYSTEM	200 pages	5 files
NOTIS	85 pages	5 files
program user	305 pages	5 files

ND-no. for Source: 250181B

File Information

File Name	Type	Containing
INST-DRAW-100-B	PROG	Installation program
DRAW-SETUP-B	XCOM	Installation subroutine
DRAW0-B	PROG	ND-100 program segment 0
DRAW1-B	PROG	ND-100 program segment 1
DRAW2-B	PROG	ND-100 program segment 2
DRAW3-B	PROG	ND-100 program segment 3
DRAW-B	INIT	Initialization file

---

Page 2

Norsk Data A.S - Program Description

Date: 87.10.02
Page: 2 of 14

Product

Name	ND no.	Category
NOTIS-DRAW for ND-100	211019B	STPR
32 bits floating format

File	Description
DRAW-PRINTER-B	SYMB Printer desc. file
DRAW-FONT-B	FONT Font file
DRAW-DRIVER-B	PROG Printer driver program
DDBTABLES-	VTM Terminal descr. file
DRAW-TXT--B	D100 NDP binary forms file
DRAW-SETLNG-1-B	PROG Set language program
DRAW-NDP--B	NDPF NDP forms file
DRAW-DEMO--B	NDSF Demo symbol library
WP-100-M-PATCH	MODE Patch file for NOTIS-WP
UE-ERMSG--C	ERR Error message database

NOTE: <rev> and <lang> is to be replaced by the current revision and language of the DIRECTORY or FILE. The revision level and language is found on the preceding "ND SOFTWARE LIBRARY DISKETTE" pages.

1 Errors Corrected

The user is not allowed to perform SINTRAN commands unless he/she is authorized to do so in USER-ENVIRONMENT.

Improvements are made to prevent the program from stopping when the internal database is filled up. See the User Guide for details about limitations in the database.

2 New Features in This Version

• It is now possible to switch to other NOTIS products without losing your context.

• Polygons and sets of polygons may be hatched.

• Grouping of objects.

• Clipping defined by other NOTIS products may be read into NOTIS-DRAW.

• Menu navigation with mouse.

• All function keys work when you are positioned in the work area.

3 Installation Procedure

The installation of NOTIS-DRAW is initiated by starting the installation program on the distributed floppies:

1. Disable your terminal from USER-ENVIRONMENT.

2. Log in as SINTRAN user SYSTEM.

---

Page 3

Program Description

Date	Norsk Data A.S	Page 3 of 14
Product	NOTIS-DRAW for ND-100 32 bits floating format	ND no.
Category	STPR

3) Insert diskette 211019B\<rev>-\<lang>-01 in the diskette station.

4) Enter the directory by typing the following commands:

@ENTER-DIRECTORY↵
DIRECTORY NAME: 211019B<rev>-<lang>-01↵
DEVICE NAME: FLOPPY-DISC-<drive-no>↵
UNIT: <floppy-unit>↵

5) Start the installation program by typing:

@(211019B<rev>-<lang>-01:FLOPPY-USER)INST-DRAW-100-B↵

The installation job will now start and guide you through the installation of NOTIS-DRAW. It checks whether the requirements to perform a successful installation are fulfilled before the installation actually starts.

NOTIS-DRAW is distributed on 2 DS/DD diskettes. The first diskette contains the program and the second diskette all the language dependent files.

To check if the installation was successful, inspect the file DRAW-100-DUMP-B:LOG on SINTRAN user SYSTEM. The file should be deleted after inspection.

NOTE: The installation job copies a file DRAW-PRINTER-B:SYMB to SINTRAN user NOTIS. If you already have an older version of NOTIS-DRAW, you also have an older version of this file. In that case, please make sure to edit the new file and delete the older version of this file. See chapter 7 for how to edit DRAW-PRINTER.

4 Define NOTIS-DRAW as Reentrant Program

To define NOTIS-DRAW as a reentrant program, you must run the MODE file DUMP-DRAW-B-100. This file is placed on the same user area as the program files are installed. Add the following in the MODE file used during cold start (usually called DUMP-REENTRANT:MODE or HENT-MODE:MODE):

@MODE (program-user)DUMP-DRAW-B-100:MODE

5 Delete NOTIS-DRAW Version A

It is possible to have both A and B versions of NOTIS-DRAW installed on the same computer. However, we recommend that you only have the last version installed.

The following instructions show how to delete NOTIS-DRAW version A.

---

[Scanned by Jonny Oddene for Sintran Data © 2025]

---

Page 4

Program Description

Date: 87.10.02
Norsk Data A.S
Page: 4 of 14

Product	ND no.	Category
Name
NOTIS-DRAW for ND-100	211019B	STPR
32 bits floating format

---

1) Log in as user SYSTEM.

2) Delete NOTIS-DRAW as reentrant program

@DELETE-REENTRANT NOTIS-DRAW-<lang>-A↵

3) Clear the NOTIS-DRAW segments from the segment table

@SCHEDULE 503B↵
@RT-LOADER↵
CLEAR-SEGMENT NDR<lang>0A↵
Y↵
CLEAR-SEGMENT NDR<lang>1A↵
Y↵
CLEAR-SEGMENT NDR<lang>2A↵
Y↵
CLEAR-SEGMENT NDR<lang>3A↵
Y↵
DELETE-SEGMENT-NAME NDR<lang>0A↵
DELETE-SEGMENT-NAME NDR<lang>1A↵
DELETE-SEGMENT-NAME NDR<lang>2A↵
DELETE-SEGMENT-NAME NDR<lang>3A↵
EXIT↵

4) Delete the printer driver program by typing

@DELETE-FILE DRAW-PDRIVER-A:PROG↵

5) Log in as the user where you installed NOTIS-DRAW version A. The name of this user may be found in the DUMP-REENTRANT (or HENT-MODE) file on user SYSTEM.

6) Delete the NOTIS-DRAW program segments

@DELETE-FILE DRAW0-<lang>-A:PROG↵
@DELETE-FILE DRAW1-<lang>-A:PROG↵
@DELETE-FILE DRAW2-<lang>-A:PROG↵
@DELETE-FILE DRAW3-<lang>-A:PROG↵

7) Enter SINTRAN user area NOTIS and delete the font files

@DELETE-FILE SIMPLEX-DRAW:FONT↵
@DELETE-FILE TRIPLEX-DRAW:FONT↵
@DELETE-FILE COMPLEX-DRAW:FONT↵
@DELETE-FILE DUPLEX-DRAW:FONT↵
@DELETE-FILE GREEK-DRAW:FONT↵

8) Update the DRAW-PRINTER-B:SYMB file on SINTRAN user area NOTIS and delete the A version of this file.

@DELETE-FILE DRAW-PRINTER-A:SYMB↵

---

ooo ND Norsk Data ooo

---

Page 5

Norsk Data A.S - Program Description

Date	Page
87.10.02	5 of 14

Product	ND no.	Category
NOTIS-DRAW for ND-100 32 bits floating format	211019B	STPR

See chapter 7 on how to edit the draw-printer file.

6 Preparing the Devices

6.1 Preparing the NOTIS Terminal

Set these values in the Communications Switches Menu for TDV-2200 terminals that will be used to run NOTIS-DRAW:

• Communication handshake: XON/XOFF
• Transmission Code Length: 7 bits
• Transmission Code Parity: Even
• Transmission Code Stop Bits: 2
• Transmission Delay: 42 ms

For TDV-1200 terminals the corresponding settings are found in the COMM.A or COMM.B setup menu (A is used for RS-232 and B for current loop):

• Receive handshake: XON/XOFF
• Communication Code Length: 7 bits
• Communication Code Parity: Even
• Communication Code Stop Bits: 2
• Transmission Delay: 40 ms

Set the same values for the terminal line as follows:

Find the terminal's Logical Device Number with the SINTRAN command @WHO-IS-ON. Continue as shown here, typing the underlined commands and parameters. XXXX represents a number provided by the computer.

@SINTRAN-SERVICE↓
*CHANGE-DATA <Logical Device Number>,I,Y,Y,N↓
DFLAG/ XXXX 1001↓
CNTREG/ XXXX 44005↓
*EXIT↓

IMPORTANT! The Logical Device Number must be followed by a "D".

6.2 Preparing the HP-Plotters

Equipment:

• HP-7475 or HP-7550 A3/A4 plotter
• 325488 Cable between ND-100 and the HP-plotter OR
• 2 local KM-10 modems connected to each other, with a 325345 Cable between the ND-100 and one modem, and a 325651 Cable between the other modem and the HP-plotter

---

Page 6

Program Description

Date	Norsk Data A.S	Page 6 of 14
Product	Name	ND no.
	NOTIS-DRAW for ND-100	211019B
	32 bits floating format

Connection

• Set the switches at the plotter.

HP-7475

Set the dip switches at the back of the plotter for 9600 BAUD, A4 paper, direct line and even parity (7-bit character length): 01000100. For further details, see pages 2-21 and 2-23 in the Operation and Interconnection Manual accompanying the HP-7475.

HP-7550

Set the switches by operating the Front-Panel on the front of the plotter. The Front-Panel looks something like this.

 ---------------------------
| Auto         |      Enter |
| feed         |            |
|              |(Display)   |
| Load/        |      Next  |
| Unload       |     Display|
 ---------------------------

Turn the power ON, and press the <ENTER> key immediately followed by the <NEXT DISPLAY> key to enter setup mode. The following should be displayed.

 -------------------------
|  HP-IB   MONITOR        |
|  STANDARD SERIAL        |
 -------------------------

The unnamed function keys on the front panel corresponding to the text shown on the display are used to set the switches.

Press the STANDARD key, and the text on the display will change to ENHANCED. Press the SERIAL key to enter the communication setup menus. The first menu looks like this:

 ----------------------
|  DATA FLOW            |
|  BYPASS HANDSHAKE     |
 ----------------------

When you press the DATA FLOW key a submenu appears on the display.

 -------------------------
|  REMOTE          *      |
|                STANDALONE|
 -------------------------

Set the data flow to REMOTE and STANDALONE by pressing the function keys several times until the correct settings are shown on the display. Press the <ENTER> key to exit and save the switch settings. Continue and do the same with BYPASS and HANDSHAKE.

BYPASS is set to OFF.
HANDSHAKE is set to XON/XOFF and DIRECT.

---

Page 7

Norsk Data A.S Program Description

Date: 87.10.02

Page: 7 of 14

Product	Name
NOTIS-DRAW for ND-100	32 bits floating format

ND no.	Category
211019B	STPR

---

When you press the <NEXT DISPLAY> key you will enter setup menu 2. The following is displayed.

DUPLEX	PARITY
BAUD

• DUPLEX is set to FULL.
• PARITY is set to 7-BITS and EVEN.
• BAUD is set to 9600.

To exit from the communication setup menus press the <ENTER> key followed by the <NEXT DISPLAY> key.

Before the plotter is ready to run, turn the power off and on. For further details see the Operation and Interconnection Manual, page 3.31 - 3.44, accompanying the HP-7550 plotter.

• Obtain a terminal line with an RS-232 interface to the ND-100.
  NOTE: The terminal line must have logical unit no. < 100.
• Connect cables in one of the following configurations:

Alternative 1: Direct cable between the ND-100 and the HP-7475.

       ND-100      325488     HP-plotter
     +-------+--------------+----------+

Alternative 2: Connection via 2 local KM-1D modems.

       ND-100      M     M     HP-plotter
     +-------+   +---+ +---+ +----------+
        |       325345 CL  325651
        |

- CL = Current Loop - M = Local KM-1D Modem

• Log in as user SYSTEM and set a file name for the line:

  @SET-PERIPHERAL-FILE <file name>,<Logical Device Number>J
  

  Ex: If the plotter has the file name HP-PLOTTER and the Logical Device Number 54D, the command will be:

  @SET-PERIPHERAL-FILE "HP-PLOTTER",54DJ
  

• Define the file access so that a user who will be working with the plotter has file access RWC(D):

  @SET-FILE-ACCESS HP-PLOTTER,RWC,RWC,RWCDJ
  

---

Page 8

Program Description

Date: 87.10.02
Company: Norsk Data A.S
Page: 8 of 14

Product Information:

Name	ND no.	Category
NOTIS-DRAW for ND-100	Z11019B	STPR
32 bits floating format

Instructions

• Find the background program for the terminal line with the SINTRAN command @LIST-DEVICE, and abort the background program:

  @LIST-DEVICE <Logical Device Number>,0J
  NNNN
  @ABORT NNNNJ
  

• Remove the background program for the actual terminal line. This is done in different ways depending on the SINTRAN version.

SINTRAN J or Older:

• Note the address of the line's background program (represented here by XXXXX) for future use; then set the address to 0:

  @SINTRAN-SERVICEJ
  *REMOVE-FROM-BACKGROUND-TABLE <Logical Device No.>,I,Y,Y,NJ
  *CHANGE-DATAFIELD (LDN),I,Y,Y,NJ
  DBPROG/ XXXXX 0J
  *EXITJ
  

SINTRAN K with Floating Background Programs:

@SINTRAN-SERVICEJ
*REMOVE-FROM-BACKGROUND-TABLE <Logical Device No.>,I,Y,Y,NJ
*CHANGE-DATAFIELD (LDN),I,Y,Y,NJ
TINFO/ 000000 10J
*EXITJ

Note: If you do not have workmode 200 and patch 3300 or newer, TINFO is only allowed changed in MEMORY, not in IMAGE and SAVE area.

SINTRAN K with Fixed Background Programs:

• Note the address of the line's background program (represented here by XXXXX) for future use; then set the address to 0:

  @SINTRAN-SERVICEJ
  *REMOVE-FROM-BACKGR-TABLE <Logical Device No.>,I,Y,Y,NJ
  *CHANGE-DATAFIELD (LDN),I,Y,Y,NJ
  DBPROG/ XXXXX 0J
  TINFO/ 000000 10J
  *EXITJ
  

  Note: If you do not have patch 3300, TINFO is only allowed changed in MEMORY, not in IMAGE and SAVE area.

---

Page 9

Program Description

Date	Norsk Data A.S	Page 9 of 14
Product
Name	NOTIS-DRAW for ND-100	ND no.
	32 bits floating format	211019B

• The transmission speed on the logical device has to be set according to the setting on the plotter. This speed has to be set explicitly, and is done by the following procedure:

@SINTRAN-SERVICE↵
*CHANGE-DATAFIELD (LDN),I,Y,Y,N↵
TSPEED/ XXXXX 210↵       (for 9600 baud)

*EXIT↵

For terminal-lines, TSPEED is often set to -1 (177777), which means that the transmission is done according to the terminal setting (soft-switches). This will not work on the plotter!! The transmission speed has to be set on the terminal-card for a whole four-group before starting the machine. Redefinition in software may be done afterwards.

• If you wish, run a test program for the plotter. See the Operation and Interconnection Manual that accompanies the HP-plotter.

6.3 Preparing the Philips, ND616CM, ND720 and Epson Printers

The printers ND-104480 (Philips), ND-110143 (ND616CM) and ND720 are set up as usual. There are no special requirements. NOTIS-DRAW takes care of switching between graphic and alphanumeric modes.

Setting of DIP-switches to the EPSON printer.

DIP NO	Switch	ON	OFF
1	1	●
	2		●
	3		●
	4		●
	5	●
	6		●
	7	●
	8	●
2	1	●
	2		●
	3	●
	4		●

Read the instructions accompanying the Epson with regard to switch settings.

---

Page 10

Date	87.10.02	Norsk Data A.S	Page 10 of 14
	PROGRAM DESCRIPTION
Product	Name	ND no.	Category
	NOTIS-DRAW for ND-100	211019B	STPR
	32 bits floating format

7 How to edit the DRAW-PRINTER file

The printer description file DRAW-PRINTER-B:SYMB on user NOTIS contains information used by NOTIS-DRAW during printing. After the installation is finished, you should check if some of these parameters have to be changed.

The first line:

@ENTER <sintran-user>,<passw.>,<proj.passw.>,<no. of min.>

This is the first line of a batch input file. This line will be used by NOTIS-DRAW to create the batch input file for printing jobs. On the example file supplied on the floppies, the SINTRAN user is FLOPPY-USER without a password. You may change this to be any SINTRAN user, but remember that you have to supply the user's password! (The batch job may take several minutes).

When the spooling system SPRINT version A02 is available, the drawings will be prepared for printing by SPRINT. The DRAW-PDRIVER program will then append the drawings to the SPRINT spooling queue instead of the SINTRAN spooling queue.

The second line:

1

This is the batch process number to which the job will be appended.

NOTIS:

This is a tag the system uses to find other NOTIS products that should be possible to reach directly from NOTIS-DRAW. The tag must remain unchanged.

The NOTIS definitions follow immediately after the NOTIS tag

<NOTIS product abbreviation>,<Standard domain name>

• <NOTIS product abbreviation>: Abbreviated product name. Ex: WP
• <Standard domain name>: Name of standard domain. Ex: NOTIS-WP-N

For the time being the following products are available to be included here:

• NOTIS-WP version N
• NOTIS-DS version C
• NOTIS-ID version B-02N
• NOTIS-BG version C
• NOTIS-RG version D
• NOTIS-CALC version E

ooo ND Norsk Data ooo

---

Page 11

Program Description

Date	Norsk Data A.S	Page 11 of 14
Product	Name	ND no.
	NOTIS-DRAW for ND-100	211019B
	32 bits floating format

SPRINT Version A

You may insert up to 10 products, and the length of each abbreviation may be up to 6 characters.

Printers:

This is a tag the system uses to find printer and plotter names and must remain unchanged.

The rest of the lines in the DRAW-PRINTER file:

<Logical printer/plotter name>,<Phys. name>,<"Device number">

• <Logical printer/plotter name>: This is the name used in NOTIS-DRAW. You may change it.
• <Phys. name>: This is the name of the Peripheral file or Spooling file for the plotter or printer.
• <"Device number">: This number is only used internally in NOTIS-DRAW to know which type of device it is.

Device Number	Description
0	For the plotter (A0-A2 plotter)
1	For the plotter
2	For the plotter (slow)
3	For Philips GP300
4	For Philips ELPHO
5	For Epson
6	For Philips ELPHO with 300 dpi resolution
7	For ND Matrix printer 616CM
-1	For ND Laser printer ND720

Note that device number 6 will give twice the resolution as number 4, but it is very time consuming.

When the spooling system SPRINT version A02 is installed on your computer, the spooling system will also handle printing of graphics. Change the <Logical printer name> to the name defined in SPRINT and delete the <Phys. name> in the DRAW-PRINTER file.

Example: DONALD-PHILIPS-,3

See Appendix D in NOTIS-DRAW User Guide for a more detailed description.

If you already have a version of the printer description file, a file DRAW-PRINTER-B:NEW will be made. If you want to use this new file, please make sure to update the new file and then delete the old file DRAW-PRINTER-B:SYMB, and rename the new file by typing:

@DELETE-FILE (NOTIS)DRAW-PRINTER-B:SYMBJ
@RENAME-FILE (NOTIS)DRAW-PRINTER-B:NEW :SYMBJ

---

[Scanned by OCR - Norsk Data A/S 2025]

---

Page 12

Norsk Data A.S Program Description

Date	Page
87.10.02	12 of 14

Product Name	ND no.	Category
NOTIS-DRAW for ND-100	211019B	STPR
32 bits floating format

8 Include Pictures in Text Documents

You may integrate your drawings in documents made by NOTIS-WP. There are two print directives in NOTIS-WP for this purpose: ^IN-BG; and ^IN-GRAPH;. The first of these directives requires the NOTIS-WP-M07. The latter requires the N version of NOTIS-WP and the spooling system SPRINT version A02 or later. ^IN-BG; will also work with the N version of NOTIS-WP. NOTIS-DRAW uses a batch processor to convert a drawing to the :PICT format required for the ^IN-BG; directive. The output file for the batch processor is the peripheral file DUMMY on SINTRAN user area SYSTEM.

NOTE: The M07 version of NOTIS-WP needs a patch to be able to handle the ^IN-BG; directive properly. Run the MODE job WP-100-M07-PATCH, distributed on the installation floppy, to set the patches.

1. Enter SINTRAN user area SYSTEM
2. Run the mode job by typing

@MODE WP-100-M07-PATCH:MODEJ

This patch will only change the NOTIS-WP segments and should be run whenever a cold start is performed. Add the following in the mode job used during a cold start (usually called DUMP-REENTRANT:MODE or HENT-MODE:MODE).

@MODE (SYSTEM)WP-100-M07-PATCH:MODE

Note that the mode job must be run after NOTIS-WP has been defined as a reentrant program.

For more detailed instructions of this patch, see the Customer Support Information report for September 1987.

9 Initialization File

The file DRAW-->B:INIT on user NOTIS contains initial parameter settings (font name, character size, etc.) used by NOTIS-DRAW at start-up. If you want to change some of these default values, log in on user NOTIS, start NOTIS-DRAW and change the default values. Press the ~ key to store the new contents in the INIT-file. (See the NOTIS-DRAW User Guide).

If you already have a version of the initialization file, a file DRAW-->B:NEW will be made.

ooo   ND Norsk Data   ooo

---

Page 13

+----------------------------+---------------------------+----------+
| Date 87.10.02              | Norsk Data A.S            | Page 13  |
|                            | PROGRAM DESCRIPTION       | of 14    |
+----------------------------+---------------------------+----------+
| Product                    | Name                      | ND no.   | Category |
+----------------------------+---------------------------+----------+----------+
|                            | NOTIS-DRAW for ND-100     | 211019B  | STPR     |
|                            | 32 bits floating format   |          |          |
+----------------------------+---------------------------+----------+----------+

If you want to use this new file, please delete the old file DRAW--B:INIT, and rename the new file by typing:

@DELETE-FILE (NOTIS)DRAW-<lang>-A:INIT↵
@RENAME-FILE (NOTIS)DRAW-<lang>-A:NEW :INIT↵

10 The error message file

If you already have a version of the error message file UE-ERMSG--C:ERR, the file UE-ERMSG--C:ERR will be copied to a file named UE-ERMSG--C:NEW (on user SYSTEM).

If you want to use this new file, please delete the old file UE-ERMSG--C:ERR, and rename the new file by typing:

@DELETE-FILE (SYSTEM)UE-ERMSG-<lang>-C:ERR↵
@RENAME-FILE (SYSTEM)UE-ERMSG-<lang>-C:NEW :ERR↵

11 The terminal description file

If you already have a version of the terminal description file DDBATBLES-E:VTM, the file DDBATBLES-E07:VTM will be copied to a file named DDBATBLES-E07:NEW (on user SYSTEM).

If you want to use this new file, please delete the old file DDBATBLES-E:VTM, and rename the new file by typing:

@DELETE-FILE (SYSTEM)DDBATBLES-E:VTM↵
@RENAME-FILE (SYSTEM)DDBATBLES-E:NEW :VTM↵

ooo ND Norsk Data ooo

---

Page 14

Date	Norsk Data A.S	Page 14 of 14
	PROGRAM DESCRIPTION
Product	Name	ND no.
	NOTIS-DRAW for ND-100	211019B
	32 bits floating format

12 Hints

12.1 Temporary batch input files

Some temporary files are created and deleted during this process on the NOTIS-DRAW's User area. Some of these files may remain on the user even after the batch jobs are finished. These files have the names:

NOTIS-DRAW-001:BATC
NOTIS-DRAW-002:BATC
.
.
etc.

These files do not take up much space, but may be deleted by the user if he/she is sure that the corresponding batch job is finished.

The batch output file is the PERIPHERAL FILE DUMMY:;1 with device no. 0 on user SYSTEM which is created by the installation job.

12.2 Additional space

The user must have at least 20 free pages before he/she is allowed to write to the Symbol Library file or to start a printing job.

ooo   ND Norsk Data   ooo

Scanned by Jonny Oddene for Sintran Data © 2025

---

Page 15

ND Software Library Diskette

Containing:

NOTIS-DRAW for ND-100
32 bits floating format

Directory Information

• Page: 1
• Directory Name: 211019B04-XX-01D

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	INST-DRAW-100-B	PROG	I	R	R	R	66	192420
1	DRAW-SETUP-B	XCOM	I	R	R	R	4	4427
2	DRAW2-B04	PROG	I	R	R	R	64	129024
3	DRAW0-B04	PROG	I	R	R	R	114	231424
4	DRAW1-B04	PROG	I	R	R	R	64	129024
5	DRAW3-B04	PROG	I	R	R	R	64	129024
6	DRAW-KX-B04	INIT	I	R	R	R	2	507
7	DRAW-PRINTER-B04	SYMB	I	R	R	R	2	330
8	DRAW-FONT-B	FONT	I	R	R	R	30	59392
9	DRAW-PDRIVER-B04	PROG	I	R	R	R	72	188416
10	DDBTABLES-G03	VTM	I	R	R	R	38	75320

11 files using 520 pages. 610 pages reserved out of 610 pages.

---

Page 16

ID Software Library Diskette

Containing:

NOTIS-DRAW for ND-100
32 bits floating format
(Norwegian version)

Directory Information

• Page: 1
• Directory Name: 211019B04-NO-02D

User Information

• User Name: FLOPPY-USER

File Directory

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW-TXT-NO-B04	D100	I	R	R	R	19	36677
1	DRAW-SETLNG-1-B	PROG	I	R	R	R	6	135168
2	DRAW-NDP-NO-B04	NDPF	I	R	R	R	44	88064
3	DRAW-DEMO-NO-B04	NDSF	I	R	R	R	11	20480
4	WP-100-M07-PATCH	MODE	I	R	RWA	2	669
5	UE-ERMSG-NO-C06	ERR	I	R	R	R	127	247808

6 files using 209 pages. 610 pages reserved out of 610 pages.

---

Page 17

ND Software Library Diskette

Containing:

NOTIS-DRAW for ND-100
32 bits floating format
(English version)

Directory Information

• User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW-TXT-EN-B04	D100	I	R	R	R	19	36335
1	DRAW-SETLNG-1-B	PROG	I	R	R	R	6	135168
2	DRAW-NDP-EN-B04	NDPF	I	R	R	R	47	94208
3	DRAW-DEMO-EN-B04	NDSF	I	R	R	R	19	36864
4	WP-100-M07-PATCH	MODE	I	R	R	RWA	2	669
5	UE-ERMSG-EN-C06	ERR	I	R	R	R	119	240896

6 files using 212 pages. 610 pages reserved out of 610 pages.

---

Page 18

ND SOFTWARE LIBRARY DISKETTE

PAGE 1

Containing:
NOTIS-DRAW for ND-100
32 bits floating format

Directory Name:
211019B04-XX-01S

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	INST-DRAW-100-B	PROG	I	R	R	R	66	192420
1	DRAW-SETUP-B	XCOM	I	R	R	R	4	4427
2	DRAW2-B04	PROG	I	R	R	R	64	129024

3 files using 134 pages. 148 pages reserved out of 148 pages.

---

Page 19

ND Software Library Diskette

Containing

NOTIS-DRAW for ND-100
32 bits floating format

Directory Info

• Page: 1
• Directory Name: 211019B04-XX-02S

User Details

• User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW0-B04	PROG	I	R	R	R	114	231424

1 file using 114 pages. 148 pages reserved out of 148 pages.

---

Page 20

ND Software Library Diskette

Containing

NOTIS-DRAW for ND-100
32 bits floating format

Directory Information

Page: 1
Directory Name: 211019B04-XX-03S

User Information

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW1-B04	PROG	I	R	R	R	64	129024

1 file using 64 pages. 148 pages reserved out of 148 pages.

---

Page 21

ND Software Library Diskette

Page 1

Containing:
NOTIS-DRAW for ND-100
32 bits floating format

Directory Name:
211019B04-XX-04S

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW3-B04	PROG	I	R	R	R	64	129024

1 file using 64 pages. 148 pages reserved out of 148 pages.

---

Page 22

ND Software Library Diskette

Page 1

Directory Name: 211019B04-XX-05S

---

Containing:
NOTIS-DRAW for ND-100
32 bits floating format

---

User Name: FLOPPY-USER

No	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW-XX-B04	INIT	I	R	R	R	2	507
1	DRAW-PRINTER-B04	SYMB	I	R	R	R	2	330
2	DRAW-FONT-B	FONT	I	R	R	R	30	59392
3	DRAW-PDRIVER-B04	PROG	I	R	R	R	72	188416
4	DDBTABLES-G03	VTM	I	R	R	R	38	75320

5 files using 144 pages. 148 pages reserved out of 148 pages.

---

Page 23

ND SOFTWARE LIBRARY DISKETTE

Containing

NOTIS-DRAW for ND-100
32 bits floating format
(English version)

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW-TXT-EN-B04	D100	I	R	R	R	19	36335
1	DRAW-SETLNG-1-B	PROG	I	R	R	R	6	135168
2	DRAW-NDP-EN-B04	NDPF	I	R	R	R	47	94208
3	DRAW-DEMO-EN-B04	NDSF	I	R	R	R	19	36864
4	WP-100-M07-PATCH	MODE	I	R	R	RWA	2	669

5 files using 93 pages. 148 pages reserved out of 148 pages.

---

Page 1
Directory Name: 211019B04-EN-06S

---

Page 24

ND SOFTWARE LIBRARY DISKETTE

PAGE 1

Containing: NOTIS-DRAW for ND-100
32 bits floating format
(English version)

Directory Name:
211019B04-EN-07S

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	UE-ERMSG-EN-C06	ERR	I	R	R	R	119	240896

1 file using 119 pages. 148 pages reserved out of 148 pages.

---

Page 25

ND Software Library Diskette

Page 1

Directory Name:
211019B04-NO-06S

---

Containing:
NOTIS-DRAW for ND-100
32 bits floating format
(Norwegian version)

---

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DRAW-TXT-NO-B04	D100	I	R	R	R	19	36677
1	DRAW-SETLNG-1-B	PROG	I	R	R	R	6	135168
2	DRAW-NDP-NO-B04	NDPF	I	R	R	R	44	88064
3	DRAW-DEMO-NO-B04	NDSF	I	R	R	R	11	20480
4	WP-100-M07-PATCH	MODE	I	R	R	RWA	2	669

5 files using 82 pages. 148 pages reserved out of 148 pages.

---

Page 26

ND SOFTWARE LIBRARY DISKETTE

PAGE 1

Containing:
NOTIS-DRAW for ND-100
32 bits floating format
(Norwegian version)

Directory Name:

211019B04-NO-07S

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	UE-ERMSG-NO-C06	ERR	I	R	R	R	127	247808

1 file using 127 pages. 148 pages reserved out of 148 pages.

---