Page 1¶

Norsk Data A.S Program Description¶

Date: 88.08.03
Page: 1 of 5

Product¶

Name	Reg. no.	Category
LED for ND-500/5000	211160B	STPR

Reason¶

X New product
X Change/Addition
X Error Correction
. Different Environment

Documentation¶

Title	Reg. no.
LED User Guide	60.266.2 EN

Purpose¶

Language Program Editor

Prerequisites¶

Computer	Type	Op. system	Version
ND-500/5000	CX	SIN III VS	K
		Work mode	312B
		Patch file	6034B

Minimum Permanent Mass Storage Resources¶

User	Userspace	Number of files
Any user	271 pages	4

ND-no. for Source: 250213B

File Name¶

File Name	Type	Containing
LED-B	PSEG	Program part
LED-B	DSEG	Data part
LED-B	LINK	Link information
UPK-IF	DEFS	Definition of LEDCALL services

Note¶

NOTE:

<rev> is to be replaced by the current revision of the DIRECTORY or FILE. The revision level is found on the preceding "ND SOFTWARE LIBRARY DISKETTE" pages.

ooo  ND Norsk Data  ooo

Page 2¶

Program Description¶

Date	Company	Page
88.08.03	Norsk Data A.S	2 of 5

Product	Name	Reg. no	Category
LED for ND-500/5000		211160B	STPR

2 Installation Procedure¶

Log in under wanted user.
Insert the diskette with the directory name 211160B-XX-01D into the diskette station.
Execute these commands (operator input is underlined and parameters are enclosed in angle brackets):

@ENTER-DIRECTORY,211160B-XX-01D
DEVICE NAME: FLOPPY-DISC-<drive-no.>
DEVICE UNIT: <floppy-unit-no.>

Use the Linkage-Loader command, COPY-DOMAIN, to copy the LED domain to destination user.

@LINKAGE-LOADER
N1: COPY-DOMAIN
Source-domain: <211160B:FL-US>LED-B<rev>
Destination-domain: "<LED-B<rev>>"
N1: EXIT

Define the LED domain as standard domain using the ND-500-MONITOR command:

@ND-500-MON
N500(0): DEFINE-STANDARD-DOMAIN_LED-B<rev>_<user>\<Dest.Domain>
N500(0): EXIT

3 Additions¶

Auxiliary Process Control: provides a multi-process environment. By pressing FUNC CTRL+E a process is connected to the current region. Communication with the process is switched on and off with CTRL+E.
Compiler Messages Mapping: maps compiler messages onto source files. By pressing SHIFT+EXECUTE while positioned in a region with compiler messages, files with warnings and errors are read into LED. Pressing EXECUTE after reading files will step through faulty lines.

Page 3¶

Norsk Data A.S¶

Program Description¶

Date: 88.08.03
Page: 3 of 5

Product	Name	Reg. no.	Category
LED for ND-500/5000		211160B	STPR

User Programmable Keys (LEDCALL services): It is now possible to define own editing functions. A set of routines as interface towards LED's regions allows one to write programs that manipulate the regions. The programs are loaded at run time and can be bound to any desired key. Use the home commands Bind-to-key and Kill-binding.

Browsing function: Lower levels of program structures can be hidden. By pressing (...) repeatedly, more and more lower levels will be hidden, pressing (...) reverses the process.

New command, Read-All-Files <file name>, will read all files listed in the file specified as argument.

New command, Rename-Region <old name> <new name>, renames existing region.

New command, Delete-Region <region name>, deletes specified region.

New command, Compare-Area (<ignore case>) (<ignore space>), compares marked area with equal size area starting at current position in region.

New command, Write-Modified-Files.

Current position in a region can be stored by pressing SHIFT+F3, and by pressing F3 switch between new position and stored.

Size of marked area can be changed using MARK. Pressing MARK above or below marked area extends it to current position, pressing MARK inside marked area decrements the size.

Quoting argument to commands get-string, get-pattern and substitute, disables language mode during search. Quoting can be done with ' or ".

Read, write, get-string, get-pattern, substitute and pretty-print operations can be aborted by pressing Cancel.

Page 4¶

Program Description¶

Date: 88.08.03
Norsk Data A.S
Page 4 of 5

Product Information¶

Product	Name	Reg. no.	Category
LED for ND-500/5000		211160B	STPR

Indentation, pretty print and browsing for C and FORTRAN.

Some commands have changed name:
Read to Read-File,
Write to Write-File,
Update to Update-File,
Move to Move-To,
Value to Value-Of,
Sort to Sort-Lines,
Global-Mode to Global-Search ().

Only the keys s, y, and n are accepted as a reply when using manual check in substitute, apart from Cancel key and Func @.

The window mode command field, key, has been removed. Use <> key to change size of window.

New window mode commands, << and >> key, rotates between all windows, regardless of size.

4. Error Correction¶

Problems due to window size 1 by 1 are corrected.

Marked area has higher priority than global mode when substituting.

FORTRAN comment header conforms to FORTRAN standard for comments.

COBOL comment header corrected.

Comments are skipped in Get-String and Substitute if language is COBOL.

Cancel during substitute with global mode on now aborts properly.

SINTRAN error "No more page available for this user" is now handled properly.

ooo  ND Norsk Data  ooo
Scanned by Jonny Oddene for Sintran Data © 2011

Page 5¶

Norsk Data A.S¶

PROGRAM DESCRIPTION¶

Date	Page
88.08.03	5 of 5

Product	Name	Reg. no.	Category
LED for ND-500/5000		211160B	STPR

Using the command Set-Preferences, LED no longer tries to save settings on other users, i.e. user System.

Now possible to read and write temporary files in Main region.

If all lines in a region were modified, Write was unacceptably slow.

Page 6¶

ND Software Library Diskette¶

Directory Name: 211160B03-XX-01D
Page: 1

Containing:¶

LED for ND-500/5000

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DESCRIPTION-FILE	DESC	I	R	R	RWACD	9	22528
1	SCRATCH-SEG-01	LINK	I	RWACD	RWACD	RWACD	1	0
2	SCRATCH-SEG-01	DSEG	I	RWACD	RWACD	RWACD	2	1029
3	SCRATCH-SEG-01	PSEG	I	RWACD	RWACD	RWACD	2	5
4	LED-B03	LINK	I	RWACD	RWACD	RWACD	1	0
5	LED-B03	DSEG	I	RWACD	RWACD	RWACD	147	394525
6	LED-B03	PSEG	I	RWACD	RWACD	RWACD	111	223695
7	UPK-IF	DEFS	I	R	R	RWACD	4	4770

8 files using 277 pages. 610 pages reserved out of 610 pages.