Page 1¶
Product Information¶
| Product name | Product number |
|---|---|
| ND Connect Module | 380723A |
Description of Product¶
Floppy # 1 ND Connect Module with volume name: 80723XX1A03
ND Connect Module will install CONNECT.EXE and all necessary TCP/IP software on directory \ND-OWS\COMMS. The path to this directory is determined during installation of ND PC Starter Kit.
Reason(s) for New Version¶
| This product will facilitate the installation and upgrading of |
|---|
| ND Connect Module and underlying TCP/IP modules. |
Table of Contents¶
| Topics | Page |
|---|---|
| Prerequisites | 2 |
| Dependencies | 2 |
| Modifications | 4 |
| Errors corrected | 4 |
| Errors known but not corrected | 4 |
| Installation | 5 |
ND-895499.1A EN
Scanned by Jonny Oddene for Sintran Data © 2011
Page 2¶
Product Information¶
Product Name:
ND Connect Module
Product Number:
380723A
1 Prerequisites¶
1.1 Hardware Prerequisites¶
None
1.2 Software Prerequisites¶
The following software must be available on the system before the product is installed:
Operating system:
| Name | Version/Revision |
|---|---|
| MS-Dos | >= 3.2 |
Other software:
| Product Name | Product Number |
|---|---|
| ND PC Starter Kit | ND-230123 |
1.3 Other Prerequisites¶
Interrupt 66 will be used by the PKTDRVND.SYS or DISPKTPM.DOS driver, when installing on NDIS adaptors.
2 Dependencies¶
2.1 Hardware Dependencies¶
None
ND-895499.1A EN
Scanned by Jonny Oddene for Sintran Data © 2011
Page 3¶
Product Information¶
Product Name: ND Connect Module
Product Number: 380723A
2.2 Software Dependencies¶
| Product Name | Product Number |
|---|---|
| 1. PC/TCP Kernel - NDIS Ethernet Single User | ND-230139 |
| or PC/TCP Kernel - NDIS Ethernet 5 Users | ND-230156 |
| or PC/TCP Kernel - NDIS Ethernet 20 Users | ND-230157 |
| or PC/TCP Kernel - NDIS Ethernet 50 Users | ND-230158 |
| 2. PC/TCP Kernel for Etherlink II | ND-230080 |
| 3. PC/TCP Kernel for Etherlink/MC | ND-230083 |
| 4. PCS/1 for ILANA (cheapernet) | ND-110394 |
| or PCS/1 for ILANA (Ethernet) | ND-110386 |
Nature of Dependency¶
If not already installed, one of these products is needed during the installation, depending on your choice of network adaptor.
- TCP/IP kernel for all clients running DPA/NDIS (i.e. 3+Open Lan Manager).
- TCP/IP kernel for clients with Etherlink II adaptor NOT running DPA/NDIS.
- TCP/IP kernel for clients with Etherlink/MC adaptor NOT running DPA/NDIS.
- TCP/IP kernel for clients with ILANA adaptor.
2.3 Other Dependencies¶
None
ND-895499.1A EN
[Scanned by Jonny Oddene for Sintran Data © 2011]
Page 4¶
Product Information¶
| Date | Norsk Data | Page |
|---|---|---|
| 90.03.28 | 4 of 5 |
| Product name | Product number |
|---|---|
| ND Connect Module | 380723A |
3 Modifications¶
3.1 New Functions/Commands¶
Setting of NO DMA on etherlink-ii cards is now possible from the DMA setting menu.
3.2 Changed Functions/Commands¶
None
3.3 Removed Functions/Commands¶
None
3.4 Other Modifications¶
This version will handle installation of PC/TCP kernel NDIS Ethernet version 2.04 pl 1 in addition to version 2.03
4 Errors Corrected¶
All known errors have been corrected.
5 Errors Known But Not Corrected¶
None
ND-895499.1A EN
Scanned by Jonny Oddene for Sintran Data © 2011
Page 5¶
Product Information¶
| Date | Norsk Data | Page |
|---|---|---|
| 90.03.28 | 5 of 5 |
| Product name | Product number |
|---|---|
| ND Connect Module | 380723A |
6 Installation¶
Regarding installation of Connect on diskless PC’s, please refer to the installation description in the Product Information sheet for 3Station Start volume ND-380722.
Before you start the installation of the ND Connect Module, please make sure you have installed the ND PC Starter Kit, and rebooted the client.
You will, during the installation, need the TCP/IP floppy valid for your network adaptor. You may choose not to install the TCP/IP software, if it is already installed on directory \ND-OWS\COMMS.
Insert the ND Connect Module floppy in drive A.
Type A:INSTALL
The installation program will enter a menu of different network adaptors.
If you are installing on a client running 3+Open client software, choose 4 NDIS from the menu, otherwise choose the entry that corresponds to your hardware.
The installation program will guide you through a complete installation of ND Connect module and the TCP/IP module chosen.
All the files will be copied to the \ND-OWS\COMMS directory.
CONFIG.SYS will be updated with necessary changes.
If you need a more detailed description of the parameters and settings for the different adaptors, please refer to the documentation that comes with your TCP/IP software.
ND-895499.1A EN
[Scanned by Jonny Oddene for Sintran Data © 2011]