Page 1¶

Norsk Data A.S Program Description¶

Date: 86.10.03
Page: 1 of 21

Product¶

Name	ND-no.	Category
DIALOGUE Example for ND-100	210869C	STPR

Reason¶

New product
Error Correction
Change/Addition
Different Environment

Documentation¶

Title	ND-no.
DIALOGUE Introduction	60.204.2 EN

(Also included as a file in this product)

Purpose¶

Demonstration and example system for ND-DIALOGUE

Prerequisites¶

Computer Type	Floating format	Op. system Version
ND-100	SIN III VSX >= J

Products¶

ND-no.	Product name
210340	SIBAS-II for ND-100, version F or later
210518	User Environment version B
210079	NOTIS-WP, version K, L or M

File Information¶

ND-no.	File no.	File Name	Type
210005	[LDR-1935J]	NRL	BPUN
210400	SUT-1644L	QED	BPUN

Minimum Mass Storage Resources for Installation¶

User	Userspace	Number of files
DEMOBASE	1900 pages on	149 files
DIALOG-SYS	1600 pages on	113 files
DIALOG-DEMO	250 pages on	17 files
SYSTEM	6 pages on	2 files

Minimum Permanent Mass Storage Resources¶

User	Userspace	Number of files
DEMOBASE	1900 pages on	149 files
DIALOG-SYS	1600 pages on	113 files
DIALOG-DEMO	250 pages on	17 files
SYSTEM	1 page on	1 file

ooo ND Norsk Data ooo

Page 2¶

Program Description¶

Product¶

Name: DIALOGUE Example for ND-100
ND-no.: 210869C
Category: STPR

Program List¶

Table 1¶

File no.	File Name	Type	Containing
205744C	DX-BCK-MENUS-C	PROG	Program for return to
205745C	DX-BCK-MENUS-C	SYMB	UE menus
206574C	DX-CHNG-USER-C	PROG	Program to change
206575C	DX-CHNG-USER-C	SYMB	current SINTRAN user
208140C	DX-DF-UE-USR-C	MCRO	Programs/macros to
208141C	DX-DF-UE-USR-C	PROG	create UE users
208142C	DX-DF-UE-USR-C	SYMB
208147C	DX-GOINTRACT-C	PROG	Program to start
208148C	DX-GOINTRACT-C	SYMB	interactive work
205751C	DX-HENT-500-C	MODE	Demo HENT-MODE file
208149C	DX-LOGIN-C	PROG	Program to change
208150C	DX-LOGIN-C	SYMB	current UE user
205855C	DX-PERFORM-G00	PROG	PERFORM version G
208151C	DX-STARTPROG-C	PROG	Program to start
208152C	DX-STARTPROG-C	SYMB	interactive work
208153C	DX-WPINIT-C	SYMB	WP default program
208150C	DX1-PATCH-1-C	MCRO	Installation macros
208157C	DX1-PPTCH-2-C	MCRO

Table 2¶

File no.	File Name	Type	Containing
208155C	DX-INIT-SYS-C	MCRO	Menu systems, menu
208156C	DX-INIT-SYS-C	TEXT	overviews and macros
208176C	DX1-INIT-SYS-C	MENU
208158C	DX-RUN-APPL-C	MCRO
208159C	DX-RUN-APPL-C	TEXT
208177C	DX1-RUN-APPL-C	MENU

Table 3¶

File no.	File Name	Type	Containing
205750C	DX-MANUAL	OUT	Documentation
208161C	DX-SYS-MAIN-C	MCRO	Menu systems, menu
208162C	DX-SYS-MAIN-C	TEXT	overviews and macros
206588C	DX1-MENU-HIE-C	TEXT
208178C	DX1-SYS-MAIN-C	MENU

Table 4¶

File no.	File Name	Type	Containing
208164C	DX-DATA-DES-C	MCRO	Menu systems, menu
208165C	DX-DATA-DES-C	TEXT	overviews and macros
208166C	DX-DATABASE-C	MCRO
208167C	DX-DATABASE-C	TEXT
208168C	DX-MAKE-APP-C	MCRO
208169C	DX-MAKE-APP-C	TEXT
208179C	DX1-DATA-DES-C	MENU
208180C	DX1-DATABASE-C	MENU
208181C	DX1-MAKE-APP-C	MENU

ooo ND Norsk Data ooo

Page 3¶

Norsk Data A.S Program Description¶

Product Information¶

Product Name	ND-no.	Category
DIALOGUE Example for ND-100	210869C	STPR

File Information¶

Section 1¶

File no.	File Name	Type	Containing
205699C	DX-DATA-CTLG-	SYMB	Source schema for example database
205690C	DX-DIALOGUE-	SYMB
205700C	DX-REDH-DIAL-	SYMB	Redefinition file
205748C	DX-DATAMODEL-	TEXT	Data model diagram
205695C	DX-DIALO-DA-C	DATA	Example database
205696C	DX-DIALO-IX-	DATA
205697C	DX-DIALOGUE-C	DATA

Section 2¶

File no.	File Name	Type	Containing
205701C	DX-CUSTOMERS-	UNIQ	UNIQUE applications
205704C	DX-DPRTMNTS-C	UNIQ
205702C	DX-PAYTABLE-	UNIQ
205703C	DX-PRODUCTS-C	UNIQ
205705C	DX-SALES-	UNIQ
205706C	DX-SALESMEN-C	UNIQ
205707C	DX-CUSTOMERS-C	HELP
205701C	DX-DPRTMNTS-C	HELP	HELP files for the above
205708C	DX-PAYTABLE-C	HELP
205711C	DX-SALES-C	HELP
205712C	DX-SALESMEN-C	HELP
208173C	DX-UNG-AC-NO-C	HELP
205716C	DX-UNQ-C	BASE	UNIQUE system files
205718C	DX-UNG-II-C-1	DEFL
208174C	DX-UNG-II-C	HELP
205717C	DX-UNG-II-C	MENU
205713C	DX-UNG-SP-EX-C	BRF	UNIQUE "SPECIAL"
205715C	DX-UNG-SP-EX-C	SYMB	routine
205721C	DX-INF-LIB-C	RPRT	RG data descriptions
205720C	DX-REP-LIB-C	RPRT	RG applications
205727C	DX-MNTHSLKUP-C	SYMB	RG lookup file

Section 3¶

File no.	File Name	Type	Containing
205728C	DX-ACSS-EN-E00	HELP	ACCESS help file
205730C	DX-ACSS-C	DATA	ACCESS data
205731C	DX-ACSS-	ISAM	descriptions
205732C	DX-ATTRIBUTE-C	DATA
205733C	DX-ATTRIBUTE-C	ISAM
205734C	DX-DATABASE-C	DATA
205735C	DX-DATABASE-C	ISAM
205726C	DX-GROUP-SET-C	DATA
205737C	DX-GROUP-SET-C	ISAM
205738C	DX-TABLE-C	DATA
205739C	DX-TABLE-C	ISAM
205740C	DX-TYPE-C	DATA
205741C	DX-TYPE-C	ISAM
205742C	DX-USER-C	DATA
205743C	DX-USER-C	ISAM

Section 4¶

File no.	File Name	Type	Containing
205755C	DX-DEP-AVRGE-C	SYMB	Query (COSMOS script)
205729C	DX-LIBRARY-C	TRAN	ACCESS applications

[No Norsk Data Logo ASCII Art]

Page 4¶

Program Description¶

Date	Norsk Data A.S	Page 4 of 21
Product	Name	ND-no.
	DIALOGUE Example for ND-100	210869C

1 Additional Prerequisites¶

A) 1 SIBAS process. (1 SIBAS process means one SIBAS system number, to be used for the database 'DIALOGUE', delivered with DIALOGUE Example). For easy installation: use SIBAS system no. 2.

B) 2 internal devices (or SIBAS devices), for an ACCESS DDI process. The devices are to be used exclusively for this example. For easy installation: use numbers 128 and 129.

C) 1 batch processor for exclusive use by the special ACCESS DDI process mentioned above. For easy installation: use batch no. 2. In addition, batch process no. 1 should be available for ordinary batch jobs.

D) 1 user area defined on a MAIN directory (DEMOBASE).

E) 2 files on the SYSTEM default user area, altogether 6 SINTRAN pages must be available for them.

F) The minimal software requirements are listed on page 1. Some other software is used in some parts of the DIALOGUE Example, but is not absolutely necessary for the example to be useful:

ND-no	Product
210185	ACCESS for ND-100 version E.
210193	NOTIS-RG for ND-100 version C.
210729	UNIQUE-II SIBAS for ND-100 version B.
210374	COSMOS Basic Module version B or later.
210713	ABM for ND-100 version A.
210724	NOTIS-BG for ND-100 version B or later.

If a new version of NOTIS-WP is installed, or a new language version of one of the other products, it may be necessary to re-install DIALOGUE Example to get it to work perfectly.

2 Changed Prerequisites¶

SIBAS version F is required. The other DIALOGUE products should, if you have them, be the versions listed above.

ooo  ND Norsk Data  ooo

Page 5¶

Program Description¶

Date	Norsk Data A.S	Page 5 of 21
Product	Name	ND-no.
DIALOGUE Example for ND-100	210869C	STPR

3 Modifications¶

The menu hierarchy has been split into six separate hierarchies, each of which can be accessed by two User Environment users.

Three of the NOTIS-RG applications now use NOTIS-BG to output diagrams.

4 Installation Procedure¶

If you have the A or B version of DIALOGUE Example, do the following:

Delete all files on user area BACK-DEMOBASE, and then the user area itself.
If you want to save any of the files on the user area DEMOBASE, we suggest you move them, at least temporarily, to another user area, and then delete user area DEMOBASE.

Alternatively, you can leave user area DEMOBASE as it is. The installation macros will in any case give DEMOBASE 1700 pages, so you will need to ensure that there is enough space on the directory, and reduce DEMOBASE's number of pages after you have finished installing. Most of the files on DEMOBASE will be replaced with new ones during installation.

Create User Areas¶

Log in with the SYSTEM user area as current (through User Environment, - or through SINTRAN).
Ensure that the directory on which DIALOG-SYS is located has at least 1600 free pages.
If the user area DIALOG-DEMO exists, ensure that the directory on which it is located has at least 250 free pages. If it does not exist, find a directory for it with at least 250 free pages.
Find a directory with at least 1900 free pages for the user area DEMOBASE. This should preferably be a different directory than the one for DIALOG-DEMO. It should have a higher directory index or be a non-default directory.
Put the first floppy into FLOPPY-DISC-1, UNIT 0.
Log in with SINTRAN user SYSTEM as current user area.

ooo ND Norsk Data ooo

Page 6¶

Program Description¶

Date	Norsk Data A.S	Page 6 of 21
Product
Name		Category
DIALOGUE Example for ND-100	ND-no. 210869C	STPR

Instructions¶

7) Do the following (give parameters on separate lines as shown):

⎕ENTER-DIRECTORY⊣
DIRECTORY NAME: 210869C-XX-01⊣
DEVICE NAME: FLOPPY-DISC-1⊣
DEVICE UNIT: 0⊣

⎕PERFORM⊣

:MCRO Filename: (210869C-XX-01:FLOPPY-USER)DX-PATCH-1:MCRO⊣
Macro name (Default = FTN): CRE-USER⊣

8) Answer the questions asked by the perform macro.

This macro creates the user areas DEMOBASE and DIALOG-DEMO (if it does not already exist), and gives DIALOG-SYS more pages. It also copies a PERFORM macro file to the SYSTEM user area.

9) Make sure that the user names above have the following unique abbreviations: DEMOB, DIA-SYS.

Regulate the users' access to the user areas¶

1) Log in with user area DIALOG-SYS as current.

2) Do the following:

⎕PERFORM⊣

:MCRO Filename: (system)DIALOG-PATCH-1⊣
Macro name (Default = FTN): ACC-DIA-SYS⊣

3) Log in with user area DEMOBASE as current.

4) Do the following:

⎕PERFORM⊣

:MCRO Filename: (system)DIALOG-PATCH-1⊣
Macro name (Default = FTN): ACC-DEMOB⊣

5) Answer the questions (Press the CR key for the old password).

6) Log in with user area DIALOG-DEMO as current.

Page 7¶

Program Description¶

Date	Norsk Data A.S	Page 7 of 21
Product	Name	ND-no.
	DIALOGUE Example for ND-100	210859C

Steps to Follow¶

Do the following:

@PERFORM⏎
:MCRO Filename : (SYSTEM)DIALOG-PATCH-1⏎
Macro name (Default = FTN) : ACC-DIA-DEM⏎

Answer the questions.
Log in with SYSTEM as current user area.

Delete the macro file created on SYSTEM:

@DELETE-FILE (SYSTEM)DIALOG-PATCH-1:MCRO⏎

Copy Files from the Floppies¶

Log in with DIALOG-SYS as current user area.
If there are any files on user DIALOG-SYS whose names begin with DX-, delete them all.
Copy all files from all floppies into the DIALOG-SYS area, using the backup system.

Remember to release the directories!

Generate Files¶

Move to a VDU (screen) terminal, preferably a NOTIS terminal (if you are not already using one).

Some of the steps later in this installation procedure can be performed only from a VDU terminal.
Log in with SYSTEM as your user area, in SINTRAN command mode.

Use ∮UE-FUNC SINTRAN to get out of the User Environment menus, if that is where you are.

SINTRAN is necessary because you cannot use MODE or PERFORM from User Environment menus directly.
Fill in the 6 lists of parameters below before you run the perform macros that need these parameters.

For questions regarding DIALOGUE products which are not installed on your machine, giving the default answers.

ooo NO Norsk Data ooo

Page 8¶

Program Description¶

Date	Norsk Data A.S	Page 8 of 21
Product	Name	ND-no.
Dialoge Example for ND-100	210869C	STPR

will not cause serious problems.

Note: "The CR key", as used below, means the key that is labeled "J" on NOTIS terminals, and "RETURN" on most console terminals.

In the list below, the 'Line mode' names of the commands in NOTIS-WP are given in English and Norwegian. If you have a NOTIS-WP that is neither English nor Norwegian, you can find these command names as follows:

Start NOTIS-WP and give the command # (to get into line mode). Then write HELP in the appropriate language to get a list of the commands.

Page 9¶

Program Description¶

Date: 86.10.03
Norsk Data A.S
Page: 9 of 21

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

List 1 (NOTIS-WP)¶

Description of the perform parameter:	Default value:	YOUR value:
If your installation's NOTIS-WP is version M, type ØØ, else Ø
The first letter in the language suffix for your installation’s NOTIS-WP (Norwegian:N)	E
Give YES/NO in the language of your NOTIS-WP. First YES in your language: (Norwegian:JA)	YES
Then give NO in your language: (Norwegian:NEI)	NO
The command SUBSTITUTE in your NOTIS-WP (line mode): (Norwegian:BYTT-UT)	SUBSTITUTE
The command STORE-DOCUMENT in your NOTIS-WP (line mode): (Norwegian: LAGRE-DOKUMENT)	STORE-DOCUMENT
The command EXIT in your NOTIS-WP (line mode): (Norwegian:SLUTT)	EXIT
The command FETCH-DOCUMENT in your NOTIS-WP (line mode) (Norwegian: HENT-DOKUMENT, K,L,-version: RETRIEVE-DOCUMENT)	FETCH-DOCUMENT

ooo  ND Norsk Data  ooo

Page 10¶

Norsk Data A.S Program Description¶

Date: 86.10.03
Page: 10 of 21

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

Commands¶

The command SAVE-INITFILE in your installation's NOTIS-WP (line mode):	EXIT
(Norwegian: LAGRE-INIT-FIL)

The command EDIT in YOUR installation's NOTIS-WP:	EDIT
(Norwegian: REDIGER)

Comment to list 2¶

Note that DIALOGUE Example uses a separate version of UNIQUE so that the users can create their own 'special functions' without interfering with an operational UNIQUE on the machine. The special version must have the name DUNIQUE if an ND-100 version, or UNIQUE-II-S-B if an ND-500 version. Both versions may be started by:

 @DUNIQUE↵

List 2 (UNIQUE)¶

Description of the perform parameter:	Default value:	YOUR value:
The number of the UNIQUE default file (SYS)UNIQ-II-A-X:DEFL to be used in DIALOGUE Example	1
User area for the file FORTRAN-2BANK:BRF (if you have the ND-100 version of UNIQUE):	SYSTEM

ooo  ND Norsk Data  ooo

Page 11¶

Program Description¶

Date: 86.10.03
Company: Norsk Data A.S
Page: 11 of 21

Product	Name	ND-no.	Category
DIALOGUE Example for ND-100	210869C	STPR

List 3 (ACCESS)¶

Description of the perform parameter:	Default value:	YOUR value:
The 2 digit number of the BATCH processor to be used for the DDI process	02
The logical device number for this BATCH processor (The batch processes no 01, 02, 03, 04, 05 and so on, have logical device numbers 670, 672, 674, 676, 678 and so on.)	672
The first internal device no. to be used for the ACCESS DDI process:	128
The second internal device no. to be used for the ACCESS DDI process:	129

List 4 (RG)¶

Description of the perform parameter:	Default value:	YOUR value:
The first letter in the language suffix for NOTIS-RG- and NOTIS-RP-: (Norwegian:N)	E

ooo NO Norsk Data ooo

Page 12¶

Program Description¶

Date: 86.10.03
Page: 12 of 21
Company: Norsk Data A.S

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

List 5 (SIBAS)¶

Description of the perform parameter:	Default value:	YOUR value:
The SIBAS system no. to be used for the example database DIALOGUE:	2

Comments to list 6:

To find out whether or not UE-AUTO-LOGIN is enabled on your TADs, give the following command:

@connect-to <the COSMOS name of your own computer>↵

Then press the ESC key. If the computer responds with "ENTER", as in a traditional SINTRAN login, UE-AUTO-LOGIN is NOT enabled on your TADs.

"Password for UE users WITH access to the SINTRAN user area SYSTEM" can be the same as the password for SINTRAN user area SYSTEM.

List 6 (USERS)¶

Description of the perform parameter:	Default value:	YOUR value:
The 2 letter language suffix for UE-ME, FILE-MAN, UE-FUNC, UE-PMAN: (Norwegian:NO)	EN
The first letter in this suffix (for UE-ME, FILE-MAN, UE-FUNC, UE-PMAN) (Norwegian:N)	E

ooo ND Norsk Data ooo

Scanned by Jonny Oddene for Sintran Data © 2011

Page 13¶

Program Description¶

Date: 86.10.03
Norsk Data A.S
Page: 13 of 21

Product Information¶

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

Password Settings¶

Corresponding Language number: (0=EN, 1=NO, 2=SW, 3=DA, 4=FR, 5=GE, 6=DU, 7=FI, 8=IC, 9=IT, 10=SP)	0

| Give password for UE users WITHOUT access to the SINTRAN user area SYSTEM | DIA |

| Give password for UE users WITH access to the SINTRAN user area SYSTEM |

| Password for the DEMOBASE user area |

| Project password for DIALOGUE Example |

| If you have COSMOS on your machine, type ø, otherwise type øø | ø |

| The COSMOS name of your machine (for remote use thru CONNECT-TO) Must be in CAPITALS. | ???? |

| Type U if UE-AUTO-LOGIN is enabled on your TADS, else S | U |

Instructions¶

4) Log in with SYSTEM as current user area.

5) Do the following:

øPERFORM↲

:MCRO Filename : (DIALOG-SYS)DX-PATCH-1↲

Macro name (Default = FTN) : PATCH-WP•↲

000 ND Norsk Data 000

Page 14¶

Norsk Data A.S Program Description¶

Date	Page
86.10.03	Page 14 of 21

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

6) Answer the questions, using "list 1 (NOTIS-WP)" (page 9).¶

If you make mistakes, you may erase a character with CTRL A, or start over from the beginning of the macro.

7) Do the following:¶

@PERFORM↵

:MCRO Filename : (DIALOG-SYS)DX-PATCH-2↵

Macro name (Default = FTN) : PATCH-UNIQUE↵

8) Answer the questions, using "list 2 (UNIQUE)".¶

9) Do the following:¶

@PERFORM↵

:MCRO Filename : (DIALOG-SYS)DX-PATCH-2↵

Macro name (Default = FTN) : PATCH-ACCESS↵

10) Answer the questions, using "list 3 (ACCESS)".¶

11) Do the following:¶

@PERFORM↵

:MCRO Filename : (DIALOG-SYS)DX-PATCH-2↵

Macro name (Default = FTN) : PATCH-RG↵

12) Answer the questions, using "list 4 (RG)".¶

13) Do the following:¶

@PERFORM↵

:MCRO Filename : (DIALOG-SYS)DX-PATCH-2↵

Macro name (Default = FTN) : PATCH-SIBAS↵

14) Answer the questions, using "list 5 (SIBAS)".¶

ooo ND Norsk Data ooo

Page 15¶

Norsk Data A.S¶

PROGRAM DESCRIPTION¶

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210865C	STPR

Instructions¶

15) Log in to User Environment as a User Environment user with supervisor status, and with SINTRAN user area SYSTEM as current.

Use the command:

@USER-LOGIN=

If nobody has done this before, use the name SYSTEM, with any password and project (no project if accounting is not running).

16) If you now have a menu on your screen, switch to SINTRAN command mode by typing:

@UE-FUNC SINTRAN=

17) Do the following:

@PERFORM=

:MCRO Filename : (DIALOG-SYS)DX-PATCH-2=

Macro name (Default = FTN) : PATCH-USERS=

18) Answer the questions, using "list 6 (USERS)".

19) Type:

@PERFORM (DIALOG-SYS)DX-PATCH-1 P-TEST=

There is a 'bug' in some PERFORM versions which creates trouble for the User Environment system: it cannot take all parameters from a single line. This is a test for that 'bug'. If you get 'ØØ OK' on the screen at the end, your PERFORM does not have this 'bug'. If it cannot find the macro P-TEST, however, you must install PERFORM-G, which can be found as a file called DX-PERFORM-G:PROG on the user area DIALOG-SYS.

Copy the DIALOGUE database, data descriptions and applications¶

1) Give the command:

@PERFORM (DIALOG-SYS)D-1-S-P RESTO-EXAMPLE=

This macro copies the special files for the example.

ooo ND Norsk Data ooo

Page 16¶

Program Description¶

Date	Norsk Data A.S	Page 16 of 21
Product	Name	ND-no.
DIALOGUE Example for ND-100	210869C	STPR

2) Give the command:

ØPERFORM (DEMOBASE)D-I-S RESTO-UE↵

This macro initializes the USER ENVIRONMENT menus.

3) Answer the questions with defaults (just press the ↵ key), but check that the defaults are OK. If not, start over from step 4 on page 13.

4) Give the command:

ØPERFORM (DEMOBASE)D-I-S RESTO-UNIQUE↵

This macro copies the UNIQUE applications, etc.

5) Answer the questions with defaults (just press the ↵ key), but check that the defaults are OK. If not, start over from step 4 on page 13.

6) Give the command:

ØPERFORM (DEMOBASE)D-I-S RESTO-RG↵

This macro copies the RG files, etc.

7) Give the command:

ØPERFORM (DEMOBASE)D-I-S RESTO-SIBAS↵

This macro copies the example SIBAS database, which has the name DIALOGUE.

8) Give the command:

ØPERFORM (DEMOBASE)D-I-S RESTO-ACCESS↵

This macro copies the ACCESS files and initializes a DDI process exclusively for this DIALOGUE example.

9) Use the default answers, but check that they are OK! If not, start over from step 4 on page 13.

10) Look through the tasks 1 to 9 above to check that you did not forget any of them.

Adjust for SIBAS System Number¶

1) Log in with user area DEMOBASE as current.

ooo ND Norsk Data ooo

Page 17¶

Program Description¶

Product	Name	ND-no.	Category
Dialog	DIALOGUE Example for ND-100	210869C	STPR

Instructions¶

2) Start the ACCESS DBA program by typing:

∂DBA S-D-D-D↵

3) Give the command LIST-DATABASE in the appropriate language.

4) Change the number in the "SIBAS no" column to the correct SIBAS system number for the database DIALOGUE.

5) Press the HOME key.

6) Press the EXIT key.

7) If steps 2 to 5 above went well, log in with user area SYSTEM as current, and run the macro ADJUST-SIB-NO to save the adjusted ACCESS data dictionary files:

∂perform (DEMOMBASE)D-I-$ ADJUST-SIB-NO↵

8) Start the DDI-process by

∂MODE (DEMOMBASE)ACC-DDI-START:MODE↵

9) If you end up in a USER ENVIRONMENT menu, log out by using the EXIT key. If you get the message "UE runtime error in: Fetch...", ignore it.

10) Log in to User Environment, as user DIA-RUN-APPL

The password is the one you gave as "password for UE users WITHOUT access to the user area SYSTEM", in LIST & (USERS)

11) Start ACCESS by typing:

```
∂ACCESS↵
```

12) Give the command COMPILE-QUERIES.

13) Press the EXIT key.

14) Log in with SYSTEM as current user area.

15) Give the command:

```
∂copy-file (DIALOG-SYS)dx-library-p:tran (demobase)library:tran↵
```

Load the Special Version of UNIQUE¶

1) Log in with DEMOBASE as current user area.

ooo ND Norsk Data ooo

Page 18¶

Norsk Data A.S Program Description¶

Date	Page
86.10.03	18 of 21

Product	Name	ND-no.	Category
	DIALOGUE Example for ND-100	210869C	STPR

Instructions¶

2) Do the following:

i) @PERFORM (DEMOBASE)D-I-S_LUN1↵

This macro loads UNIQUE prog-files on the user area DEMOBASE.

ii) Log in with SYSTEM as current user area.

iii) @PERFORM (DEMOBASE)D-I-S_DUN1↵

This macro dumps the special version of UNIQUE reentrant.

Reduce the Startup Time for ACCESS¶

1) Log in to User Environment, as user DIA-RUN-APPL

2) Start ACCESS by typing:

@ACCESS↵

3) Give the command:

*DUMP↵

ACCESS will respond with:

"The help file has been dumped"

4) Press the EXIT key.

Create .Jinitfiles for the M Version of NOTIS-WP¶

1) If your installation's NOTIS-WP is the K or L version, skip to "Start the SIBAS Database".

2) If you have COSMOS on your computer, skip to step 11.

3) While still logged in to UE, Start NOTIS-WP.

This can be done from the menus by typing:

word↵

4) Enter the "WP-environment" menu.

ooo    ND Norsk Data    ooo

Page 19¶

Program Description¶

Product¶

Name	Category
DIALOGUE Example for ND-100	STPR

Process Instructions¶

This is done as follows: If you have command menus, type "MW"; if you do not have command menus, type "1".

5) Make sure that "Command menu mode" and "Use document storage" are both set to "N".

6) Press \ to leave the menu.

7) Give the | command (SHIFT + `).

8) Press the EXIT key to leave NOTIS-WP.

9) Repeat steps 2 to 8 for the following 11 UE users:

DIA-MAKE-APP     Password:     S-DIA-RUN-APPL     Password: 
DIA-DATA-DES     same as       S-DIA-MAKE-APP     Same as "password
DIA-DATAB        DIA-RUN-APPL  S-DIA-DATA-DES     for UE users WITH 
DIA-SYS-MAIN                   S-DIA-DATAB        access to the 
DIA-INIT-SYS                  S-DIA-SYS-MAIN     SINTRAN user area 
                              S-DIA-INIT-SYS     SYSTEM" in LIST 6

10) Skip to step 12.

11) Type:

Ø(DIALOG-SYS)DX-WPINIT

12) Start NOTIS-WP.

13) Check that "Command menu mode" and "Document storage" in the "WP-environment" menu are both N.

If this is not the case, it means that your NOTIS-WP does not automatically fetch the initfile on startup. You must re-install NOTIS-WP to change this. Unless you do, some of the menu options in DIALOGUE Example will not work.

Start the SIBAS Database¶

1) Log in to UE as user S-DIA-INIT-SYS.

2) Select "Initialize databases".

3) Select "Start the SIBAS database".

4) Select the menu options 4, 5, 7 and 9 in succession.

Page 20¶

Program Description¶

Date	Norsk Data A.S	Page 20 of 21
Product	Name	ND-no.
DIALOGUE Example for ND-100	210869C	STPR

Update the BG-PRINTERS File¶

Make sure that the file BG-PRINTERS on user SYSTEM contains the following line:
```
SCREEN,,20
```

Update the RG-100-DUMP File¶

Add the following line in the beginning of the file RG-100-DUMP:MODE on user NOTIS:
```
∅ENTER NOTIS,,,320000
```

Update the HENT-MODE and LOAD-MODE Files¶

Include the following line in the file (SYSTEM)LOAD-MODE:
```
∅APPEND-BATCH 2 (demobase)ACC-DDI-E:BATC (demobase)ACC-DDI-E:LOG
↑
Adjust the batch number
```
This is to start the special ACCESS DDI process for the example system.
Include the following in the file (SYSTEM)HENT-MODE:
```
∅PERFORM (DEMOBASE)DIALOGUE DUN1,..........
```

Optional Adjustments¶

You may declare the terminals to be USER-ENVIRONMENT terminals by the UE-AUTOMATIC-LOGIN command in SINTRAN.
To make sure that the file (SYSTEM)HENT-MODE and the mode/batch files it starts are complete, that is, that they include all the dumps and starts necessary for DIALOGUE, you can look at the file (DEMOBASE)DEMO-HENT-MODE:MODE to see what is needed.

ooo ND Norsk Data ooo

Page 21¶

+-------------------+------------------------------+---------------+----------+
| Date 86.10.03     | Norsk Data A.S               | Page 21 of 21 |          |
| PROGRAM DESCRIPTION                             |               |          |
+---------------+---------------------------------+---------------+----------+
| Product       | Name                            | ND-no.        | Category |
+---------------+---------------------------------+---------------+----------+
|               | DIALOGUE Example for ND-100     | 210869C       | STPR     |
+---------------+---------------------------------+---------------+----------+

1) To give a SINTRAN command while in the menus: write Ø instead of choosing a task, and then write the command (with parameters).

2) You cannot write ØPERFORM or ØMODE when in the menus. Instead, write

ØUE-FUNC PERFORM⌟

or

ØUE-FUNC MODE⌟

3) If your PERFORM or MODE job ends up outside the menus, write

ØUE-MENU⌟

and you will return to the menus.

4) Press SHIFT + EXIT to get directly to the MAIN menu from anywhere!

5) To log out: Press the EXIT key when you are in the MAIN menu.

6) To change the current user area: instead of choosing a menu option, write CHANGE-TO-FROM-USER-SYSTEM or an abbreviation.

7) The macro RESTO-ACCESS initiates a batch processor for ACCESS DDI. This batch may be restored to normal use for batch jobs by using the macro INTIMSL:

ØPERFORM (DIALOG-SYS)D INTIMSL⌟

8) The manual is now on the file (DEM0BASE)DIALOGUE-INTRO:OUT, and may be printed using NOTIS-WP.

ooo ND Norsk Data ooo ```

Page 22¶

ND Software Library Diskette¶

Page 1

Containing¶

DIALOGUE Example for ND-500

Directory Name: 210870C00-XX-01S
User Name: FLOPPY-USER

File Access¶

Nr	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX-HENT-500-C00	MODE	I	RWACD	RWACD	RWACD	3	2346
1	DX-PERFORM-G00	PROG	I	RWACD	RWACD	RWACD	35	270335
2	DX-WPRINT-C00	SYMB	I	RWACD	RWACD	RWACD	3	3330
3	DX5-PATCH-1-C00	MCRO	I	RWACD	RWACD	RWACD	5	8077
4	DX5-PPTCH-2-C00	MCRO	I	RWACD	RWACD	RWACD	6	9476
5	DX-DF-UE-USR-C00	MCRO	I	RWACD	RWACD	RWACD	3	2451
6	DX-DF-UE-USR-C00	PROG	I	RWACD	RWACD	RWACD	14	266239
7	DX-DF-UE-USR-C00	SYMB	I	RWACD	RWACD	RWACD	7	11092
8	DX-BCK-MENUS-C00	PROG	I	RWACD	RWACD	RWACD	3	4095
9	DX-BCK-MENUS-C00	SYMB	I	RWACD	RWACD	RWACD	2	807
10	DX-CHNG-USER-C00	PROG	I	RWACD	RWACD	RWACD	11	20479
11	DX-CHNG-USER-C00	SYMB	I	RWACD	RWACD	RWACD	8	14030
12	DX-DUNIQUE-C00	PROG	I	RWACD	RWACD	RWACD	3	4095
13	DX-DUNIQUE-C00	SYMB	I	RWACD	RWACD	RWACD	2	6095
14	DX-DUNIQUE-C00	PYRG	I	RWACD	RWACD	RWACD	3	4095
15	DX-DUNIQQUICK-C00	SYMB	I	RWACD	RWACD	RWACD	2	612
16	DX-GOINTRACT-C00	PROG	I	RWACD	RWACD	RWACD	3	4095
17	DX-GOINTRACT-C00	SYMB	I	RWACD	RWACD	RWACD	2	807
18	DX-LOGIN-C00	PROG	I	RWACD	RWACD	RWACD	12	22527
19	DX-LOGIN-C00	SYMB	I	RWACD	RWACD	RWACD	4	4570
20	DX-STARTPROG-C00	PROG	I	RWACD	RWACD	RWACD	9	2641
21	DX-STARTPROG-C00	SYMB	I	RWACD	RWACD	RWACD	2

22 files using 142 pages. 148 pages reserved out of 149.

Page 23¶

ND Software Library Diskette¶

Page 1

Containing: DIALOGUE Example for ND-500

Directory Name¶

210870C00-XX-02S

User Name¶

FLOPPY-USER

File Access¶

Nr	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX5-INIT-SYS-C00	MENU	I	RWACD	RWACD	RWACD	31	60771
1	DX-INIT-SYS-C00	MCRO	I	RWACD	RWACD	RWACD	26	49470
2	DX-INIT-SYS-C00	TEXT	I	RWACD	RWACD	RWACD	44	87423
3	DX5-RUN-APPL-C00	MENU	I	RWACD	RWACD	RWACD	18	33222
4	DX-RUN-APPL-C00	MCRO	I	RWACD	RWACD	RWACD	3	2425
5	DX-RUN-APPL-C00	TEXT	I	RWACD	RWACD	RWACD	18	32897

6 files using 140 pages. 148 pages reserved out of 148 pages.

Page 24¶

ND Software Library Diskette¶

Containing: DIALOGUE Example for ND-500

Directory Name: 210B7DCD0-XX-03S

User Name: FLOPPY-USER

File Access¶

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX-MANUAL-C00	OUT	I	RWACD	RWACD	RWACD	74	149039
1	DX5-MENU-HIE-C00	TEXT	I	RWACD	RWACD	RWACD	6	9974
2	DX5-SYS-MAIN-CD0	MENU	I	RWACD	RWACD	RWACD	17	32446
3	DX-SYS-MAIN-C00	MCRO	I	RWACD	RWACD	RWACD	7	11961
4	DX-SYS-MAIN-C00	TEXT	I	RWACD	RWACD	RWACD	21	39841

5 files using 125 pages. 148 pages reserved out of 148 pages.

Page 25¶

ND Software Library Diskette¶

PAGE 1

Containing: DIALOGUE Example for ND-500

Directory Name¶

210870C00-XX-04S

User Name¶

FLOPPY-USER

File Access¶

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX5-DATA-DES-C00	MENU	I	RWACD	RWACD	RWACD	21	39281
1	DX-DATA-DES-C00	MCRO	I	RWACD	RWACD	RWACD	6	10048
2	DX-DATA-DES-C00	TEXT	I	RWACD	RWACD	RWACD	26	50823
3	DX5-DATABASE-C00	MENU	I	RWACD	RWACD	RWACD	18	34395
4	DX-DATABASE-C00	MCRO	I	RWACD	RWACD	RWACD	5	6777
5	DX-DATABASE-C00	TEXT	I	RWACD	RWACD	RWACD	22	42811
6	DX5-MAKE-APP-C00	MENU	I	RWACD	RWACD	RWACD	21	37790
7	DX-MAKE-APP-C00	MCRO	I	RWACD	RWACD	RWACD	2	1574
8	DX-MAKE-APP-C00	TEXT	I	RWACD	RWACD	RWACD	26	49575

9 files using 147 pages. 148 pages reserved out of 148 pages.

Page 26¶

NO SOFTWARE LIBRARY DISKETTE¶

Containing: DIALOGUE Example for ND-500¶

Directory Name : 210870C00-XX-05S¶

User Name : FLOPPY-USER¶

Nr	File name	Type	T	File access:			Pages	Bytes
				Public	Friend	Own
0	DX-DATAMODEL-C00	TEXT	I	RWACD	RWACD	RWACD	3	2707
1	DX-DIALOGUE-C00	DATA	I	RWACD	RWACD	RWACD	57	1064959
2	DX-DIALO-IX-C00	DATA	I	RWACD	RWACD	RWACD	63	2045953
3	DX-DATA-CTLG-C00	SYMB	I	RWACD	RWACD	RWACD	2	1132
4	DX-DIALOGUE-C00	SYMB	I	RWACD	RWACD	RWACD	8	12289
5	DX-REDF-DIAL-C00	SYMB	I	RWACD	RWACD	RWACD	3	2200

6 files using 136 pages. 148 pages reserved out of 148 pages.

Page 27¶

ND Software Library Diskette¶

Page: 1

Containing: DIALOGUE Example for ND-500

Directory Name: 210870C00-XX-065
User Name: FLOPPY-USER

File Access¶

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX-INF-LIB-C00	RPRT	C	RWACD	RWACD	RWACD	20	40959
1	DX-REP-LIB-C00	RPRT	C	RWACD	RWACD	RWACD	30	61439
2	DX-MNTHSLKUP-C00	SYMB	I	RWACD	RWACD	RWACD	2	133
3	DX-DPRTMNTS-C00	UNIQ	I	RWACD	RWACD	RWACD	2	894
4	DX-DPRTMTS-C00	HELP	I	RWACD	RWACD	RWACD	2	408
5	DX-SALESMEN-C00	UNIQ	I	RWACD	RWACD	RWACD	2	1028
6	DX-SALESMEN-C00	HELP	I	RWACD	RWACD	RWACD	2	600
7	DX-CUSTOMERS-C00	UNIQ	I	RWACD	RWACD	RWACD	2	1096
8	DX-CUSTOMERS-C00	HELP	I	RWACD	RWACD	RWACD	2	404
9	DX-SALES-C00	UNIQ	I	RWACD	RWACD	RWACD	3	3204
10	DX-SALES-C00	HELP	I	RWACD	RWACD	RWACD	2	2030
11	DX-PAYTABLE-C00	HELP	I	RWACD	RWACD	RWACD	2	835
12	DX-PAYTABLE-C00	UNIQ	I	RWACD	RWACD	RWACD	2	308
13	DX-PRODUCTS-C00	UNIQ	I	RWACD	RWACD	RWACD	2	1275
14	DX-PRODUCTS-C00	HELP	I	RWACD	RWACD	RWACD	2	402
15	DX-UNQ-C00	BASE	I	RWACD	RWACD	RWACD	2	552
16	DX-UNQ-II-C00-1	DEF1	I	RWACD	RWACD	RWACD	2	732
17	DX-UNQ-II-C00	MENU	I	RWACD	RWACD	RWACD	2	574
18	DX-UNQ-II-C00	HELP	I	RWACD	RWACD	RWACD	2	1039
19	DX-UNQ-AC-NC-C00	HELP	I	RWACD	RWACD	RWACD	2	1722
20	DX-UNQ-SP-EX-C00	SYMB	I	RWACD	RWACD	RWACD	2	1650
21	DX-UNQ-SP-EX-C00	NRF	I	RWACD	RWACD	RWACD	3	3022
22	DX-UNQ-SP-EX-C00	BRF	I	RWACD	RWACD	RWACD	3	3162

23 files using 95 pages. 148 pages reserved out of 148 pages.

Page 28¶

ND Software Library Diskette¶

PAGE 1¶

Containing: DIALOGUE Example for ND-500

Directory Name: 210870C00-XX-07S
User Name: FLOPPY-USER

File Access¶

Nr	File Name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX-ACSS-EN-E00	HELP	I	RWACD	RWACD	RWACD	68	135729
1	DX-USER-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
2	DX-USER-C00	DATA	I	RWACD	RWACD	RWACD	2	1182
3	DX-ACSS-C00	ISAM	I	RWACD	RWACD	RWACD	4	10238
4	DX-ACSS-C00	DATA	I	RWACD	RWACD	RWACD	2	1654
5	DX-DATABASE-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
6	DX-DATABASE-C00	DATA	I	RWACD	RWACD	RWACD	2	286
7	DX-TABLE-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
8	DX-TABLE-C00	DATA	I	RWACD	RWACD	RWACD	2	1270
9	DX-ATTRIBUTE-C00	ISAM	I	RWACD	RWACD	RWACD	9	20478
10	DX-ATTRIBUTE-C00	DATA	I	RWACD	RWACD	RWACD	7	10450
11	DX-GROUP-SET-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
12	DX-GROUP-SET-C00	DATA	I	RWACD	RWACD	RWACD	2	998
13	DX-TYPE-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
14	DX-TYPE-C00	DATA	I	RWACD	RWACD	RWACD	3	2948

15 files using 111 pages. 148 pages reserved out of 148 pages.

Page 29¶

ND Software Library Diskette¶

Containing¶

DIALOGUE Example for ND-500

Directory Name¶

210870C00-XX-08S

User Name¶

FLOPPY-USER

Nr	File name	Type	T	File access:	Pages	Bytes
				Public	Friend	Own
0	DX-LIBRARY-C00	TRAN	I	RWACD	RWACD	RWACD
1	DX-DEP-AVRGE-C00	SYMB	I	RWACD	RWACD	RWACD
2	DX-DIALO-DA-C00	DATA	I	RWACD	RWACD	RWACD

3 files using 116 pages. 148 pages reserved out of 148 pages.

Page 30¶

ND Software Library Diskette¶

Page 1

Containing: DIALOGUE Example for ND-500

Directory Name: 210870C00-XX-01D¶

User Name: FLOPPY-USER

File Access:¶

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	DX-HENT-500-C00	MODE	I	RWACD	RWACD	RWACD	3	2346
1	DX-PERFORM-G00	PROG	I	RWACD	RWACD	RWACD	35	270335
2	DX-WPINIT-C00	SYMB	I	RWACD	RWACD	RWACD	3	3330
3	DX5-PATCH-1-C00	MCRO	I	RWACD	RWACD	RWACD	5	8077
4	DX5-PPTCH-2-C00	MCRO	I	RWACD	RWACD	RWACD	6	9476
5	DX-DF-UE-USR-C00	MCRO	I	RWACD	RWACD	RWACD	3	2451
6	DX-DF-UE-USR-C00	PROG	I	RWACD	RWACD	RWACD	14	266239
7	DX-DF-UE-USR-C00	SYMB	I	RWACD	RWACD	RWACD	7	11092
8	DX-BCK-MENUS-C00	PROG	I	RWACD	RWACD	RWACD	3	4095
9	DX-BCK-MENUS-C00	SYMB	I	RWACD	RWACD	RWACD	2	807
10	DX-CHNG-USER-C00	PRMG	I	RWACD	RWACD	RWACD	11	20479
11	DX-CHNG-USER-C00	SYMB	I	RWACD	RWACD	RWACD	8	1430
12	DX-DUNIQUE-C00	PRMG	I	RWACD	RWACD	RWACD	3	4095
13	DX-DUNIQUE-C00	SYMB	I	RWACD	RWACD	RWACD	2	609
14	DX-DUNIUQICK-C00	PRMG	I	RWACD	RWACD	RWACD	3	4095
15	DX-DUNIUQICK-C00	SYMB	I	RWACD	RWACD	RWACD	2	614
16	DX-GOINTRACT-C00	PRMG	I	RWACD	RWACD	RWACD	3	4095
17	DX-GOINTRACT-C00	SYMB	I	RWACD	RWACD	RWACD	2	807
18	DX-LOGIN-C00	PRMG	I	RWACD	RWACD	RWACD	12	22527
19	DX-LOGIN-C00	SYMB	I	RWACD	RWACD	RWACD	4	5570
20	DX-STARTPROG-C00	PROG	I	RWACD	RWACD	RWACD	9	264199
21	DX-STARTPROG-C00	SYMB	I	RWACD	RWACD	RWACD	2	1196
22	DX5-INIT-SYS-C00	MENU	I	RWACD	RWACD	RWACD	31	60771
23	DX5-INIT-SYS-C00	MCRO	I	RWACD	RWACD	RWACD	26	49470
24	DX-INIT-SYS-C00	TEXT	I	RWACD	RWACD	RWACD	44	84723
25	DX5-RUN-APPL-C00	MENU	I	RWACD	RWACD	RWACD	18	33222
26	DX-RUN-APPL-C00	MCRO	I	RWACD	RWACD	RWACD	3	2425
27	DX-RUN-APPL-C00	TEXT	I	RWACD	RWACD	RWACD	18	32897
28	DX-MANUAL-C00	OUT	I	RWACD	RWACD	RWACD	74	149399
29	DX5-MENU-HIE-C00	TEXT	I	RWACD	RWACD	RWACD	6	9974
30	DX5-SYS-MAIN-C00	MENU	I	RWACD	RWACD	RWACD	2	32466
31	DX-SYS-MAIN-C00	MCRO	I	RWACD	RWACD	RWACD	7	11961
32	DX-SYS-MAIN-C00	TEXT	I	RWACD	RWACD	RWACD	21	39841
33	DX5-DATA-DES-C00	MENU	I	RWACD	RWACD	RWACD	21	39281
34	DX-DATA-DES-C00	MCRO	I	RWACD	RWACD	RWACD	7	10048
35	DX-DATA-DES-C00	TEXT	I	RWACD	RWACD	RWACD	26	50823
36	DX5-DATABASE-C00	MENU	I	RWACD	RWACD	RWACD	18	34935
37	DX-DATABASE-C00	MCRO	I	RWACD	RWACD	RWACD	5	6777
38	DX-DATABASE-C00	TEXT	I	RWACD	RWACD	RWACD	22	42811
39	DX5-MAKE-APP-C00	MENU	I	RWACD	RWACD	RWACD	21	37790
40	DX-MAKE-APP-C00	MCRO	I	RWACD	RWACD	RWACD	2	1574
41	DX-MAKE-APP-C00	TEXT	I	RWACD	RWACD	RWACD	26	49575

42 files using 555 pages. 610 pages reserved out of 610 pages.

Page 31¶

ND Software Library Diskette¶

Containing: DIALOGUE Example for ND-500¶

Directory Name: 210870C00-XX-02D
User Name: FLOPPY-USER

Nr	File name	Type	T	File access:	Pages	Bytes
				Public	Friend	Own
0	DX-DATAMODEL-C00	TEXT	I	RWACD	RWACD	RWACD
1	DX-DIALOGUE-C00	DATA	I	RWACD	RWACD	RWACD
2	DX-DIALO-IX-C00	DATA	I	RWACD	RWACD	RWACD
3	DX-DATA-CILG-C00	SYMB	I	RWACD	RWACD	RWACD
4	DX-DIALOGUE-C00	SYMB	I	RWACD	RWACD	RWACD
5	DX-ROF-DIAL-C00	SYMB	I	RWACD	RWACD	RWACD
6	DX-INF-LIB-C00	RPRT	C	RWACD	RWACD	RWACD
7	DX-REP-LIB-C00	RPRT	C	RWACD	RWACD	RWACD
8	DX-MTHSLKUP-C00	SYMB	I	RWACD	RWACD	RWACD
9	DX-DPRTMNTS-C00	UNIQ	I	RWACD	RWACD	RWACD
10	DX-DPRTMNTS-C00	HELP	I	RWACD	RWACD	RWACD
11	DX-SALESMEN-C00	UNIQ	I	RWACD	RWACD	RWACD
12	DX-SALESMEN-C00	HELP	I	RWACD	RWACD	RWACD
13	DX-CUSTOMERS-C00	UNIQ	I	RWACD	RWACD	RWACD
14	DX-CUSTOMERS-C00	HELP	I	RWACD	RWACD	RWACD
15	DX-SALES-C00	UNIQ	I	RWACD	RWACD	RWACD
16	DX-SALES-C00	HELP	I	RWACD	RWACD	RWACD
17	DX-PAYTABLE-C00	UNIQ	I	RWACD	RWACD	RWACD
18	DX-PAYTABLE-C00	HELP	I	RWACD	RWACD	RWACD
19	DX-PRODUCTS-C00	UNIQ	I	RWACD	RWACD	RWACD
20	DX-PRODUCTS-C00	HELP	I	RWACD	RWACD	RWACD
21	DX-UNQ-C00	BASE	I	RWACD	RWACD	RWACD
22	DX-UNQ-II-C00-1	DEFI	I	RWACD	RWACD	RWACD
23	DX-UNQ-II-C00	MENU	I	RWACD	RWACD	RWACD
24	DX-UNQ-II-C00	HELP	I	RWACD	RWACD	RWACD
25	DX-UNQ-AC-NC-C00	HELP	I	RWACD	RWACD	RWACD
26	DX-UNQ-SP-EX-C00	SYMB	I	RWACD	RWACD	RWACD
27	DX-UNQ-SP-EX-C00	NRF	I	RWACD	RWACD	RWACD
28	DX-UNQ-SP-EX-C00	BRF	I	RWACD	RWACD	RWACD
29	DX-ACSS-EN-C00	HELP	I	RWACD	RWACD	RWACD
30	DX-USER-C00	ISAM	I	RWACD	RWACD	RWACD
31	DX-USER-C00	DATA	I	RWACD	RWACD	RWACD
32	DX-ACSS-C00	ISAM	I	RWACD	RWACD	RWACD
33	DX-ACSS-C00	DATA	I	RWACD	RWACD	RWACD
34	DX-DATABASE-C00	ISAM	I	RWACD	RWACD	RWACD
35	DX-DATABASE-C00	DATA	I	RWACD	RWACD	RWACD

*** CONTINUED ***

Page 32¶

ND Software Library Diskette¶

Containing: DIALOGUE Example for ND-500¶

Directory Name: 210870C00-XX-02D¶

User Name: FLOPPY-USER¶

File Access:¶

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
36	DX-TABLE-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
37	DX-TABLE-C00	DATA	I	RWACD	RWACD	RWACD	2	1270
38	DX-ATTRIBUTE-C00	ISAM	I	RWACD	RWACD	RWACD	9	20478
39	DX-ATTRIBUTE-C00	DATA	I	RWACD	RWACD	RWACD	7	10450
40	DX-GROUP-SET-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
41	DX-GROUP-SET-C00	DATA	I	RWACD	RWACD	RWACD	2	998
42	DX-TYPE-C00	ISAM	I	RWACD	RWACD	RWACD	2	7166
43	DX-TYPE-C00	DATA	I	RWACD	RWACD	RWACD	3	2948
44	DX-LIBRARY-C00	TRAN	I	RWACD	RWACD	RWACD	85	446463
45	DX-DEP-AVRGE-C00	SYMB	I	RWACD	RWACD	RWACD	2	1113
46	DX-DIALO-DA-C00	DATA	I	RWACD	RWACD	RWACD	29	643073

47 files using 458 pages. 610 pages reserved out of 610 pages.