Page 1¶

Norsk Data A.S - Program Description¶

Date: 88.06.02
Page: 1 of 16

Product¶

Name	Reg. no.	Category
BIM for ND-500/5000	210938C	ROY

Reason¶

. New product
. Error Correction
✗ Change/Addition
. Different Environment
. Other: ...................................

Documentation¶

Title	Reg. no.
BIM Application Development	60.260.3 EN
BIM Reference Manual	60.299.1 EN
BIM Operations	30.068.3 EN

Purpose¶

4th generation ADP tool with batch facility. Uses the SIBAS database system.

Prerequisites¶

Computer	Type	Float.format	Op. system Version
ND-500/	All with CX	SIN III VSX500 >=K Revision 5400B
ND-5000

Reg. no.	Product name
210526	NOTIS WP version MO7 or Nxx
210518	USER ENVIRONMENT required by NOTIS WP Nxx
210506	SPRINT version >= A02
210340	SIBAS II for ND-500/5000 version >= F02 (Wide column storage requires SIBAS/R)
210534B	JEC
210177J	COBOL compiler version >= J02 (For Specials)

One free device (anyone will do)

Minimum Mass Storage Resources for Installation¶

User	Userspace
BIM-USER	4500 pages
BIM-INSTALL	4000 pages

Minimum Permanent Mass Storage Resources¶

User	Userspace
BIM-USER	4000 pages
BIM-INSTALL	4000 pages
BIM-PRINT	1000 pages
BIM-JOBBQ	600 pages

Directory Names¶

Directory Name	User Name
210938C--01D	FLOPPY-USER
210938C--02D	FLOPPY-USER
210938C--03D	FLOPPY-USER
210938C--04D	FLOPPY-USER
210938C--05D	FLOPPY-USER
210938C--06D	FLOPPY-USER

Note: <rev> and <lang> are to be replaced by the current revision and language of the DIRECTORY or FILE. The revision level and language is found on the preceding "ND SOFTWARE LIBRARY DISKETTE" pages.

ooo ND Norsk Data ooo

Page 2¶

Norsk Data A.S Program Description¶

Product	Name	Reg. no.	Category
BIM for ND-500/5000		21093BC	ROY

1 ERRORS CORRECTED¶

Especially definition module and scrolling table handling, but also quite a few compiler and runtime errors.

2 KNOWN, BUT NOT CORRECTED ERRORS¶

The reader is referred to the CIS database at CTS, Skullerud.

3 CHANGED PREREQUISITES¶

Newest version of COBOL = J02 is required. NOTIS WP version M07 or Nxx and SPRINT version >= A02 is also required. To store wide columns in a database, SIBAS/R is required (Expected release summer '88).

4 MODIFICATIONS¶

Compared to the version B10 release, this version of BIM has increased performance by approx. 30% and offers a possibility to use free text fields (= wide columns in SIBAS). NOTIS WP is fully integrated and can be entered both through a BIM system program (called WP) and through a BIM statement. There are also other new BIM statements, including UNSTRING. The data transportation rules (i.e. COPY, COMPUTE, Database retrieval) have been altered. Several limitations have been removed, these include the number of numeric fields in a fieldset, the number of lines in a report layout and the number of pages in a report. FOCO now uses the tabulatorkeys for tabulation which is especially important in NET ONE installations. Indexes are now alfanumeric which means that it is possible to run BIM with most old databases. See also the separate text which should follow this PD sheet.

4.1 CHANGED COMMANDS¶

The tabulator key now works as a tabulator in FOCO. Each keystroke moves the cursor ten positions. On the program selection line the CR key will start the specified program when the cursor is positioned in the program name field.

4.2 REMOVED COMMANDS¶

4.3 IMPROVED PERFORMANCE¶

An average of 30%, but a lot more for some statements e.g. the CALL and PRINT statements (7 - 10 times faster). The new functionality (like UNSTRING) makes it possible to write more efficient application programs.

ooo ND Norsk Data ooo
Scanned by Jonny Oddene for Sintran Dag © 2011

Page 3¶

+----------------+----------------+----------+
| Date 88.06.02  | Norsk Data A.S | Page 3 of 16 |
| PROGRAM DESCRIPTION            |            |
+----------------+----------------+----------+
| Product        | Name           | Reg. no.  | Category |
| BIM for ND-500/5000 |          | 210938C   | ROY      |
+----------------+----------------+----------+

5 INSTALLATION PROCEDURE¶

Please read the whole installation procedure before you start the installation. The installation MUST be done in the given sequence. All instructions in all sections must be followed even if BIM is already installed on the machine. It is explicitly mentioned where there are different actions depending on whether this is a first installation or not.

Before you can run your own BIM applications it is also necessary to study the BIM Application Development Manual.

5.1 GENERAL¶

In the following sections you will see some references to the SINTRAN user "" which is required when creating a BIM application system. These instructions can be omitted in the BIM (tool) installation and done later when the need arises (they are also referred to in the BIM Application Development Manual.) However, if you at installation time want to install a BIM application system, the normal sequence is given below.

Notice especially that all ISAM files MUST be continuous. If you copy the files with the BACKUP-SYSTEM this is automatically taken care of.

ooo ND Norsk Data ooo

Scanned by Jonny Oddene for Sintran Data © 2011

Page 4¶

Program Description¶

Date	Norsk Data A.S	Page 4 of 16
Product	Name	Reg. no.
BIM for ND-500/5000		210938C

5.2 Required SINTRAN Users¶

Create the users:

User	Min. no. of pages
"BIM"	2
"BIM-USER"	4500
"BIM-PRINT"	1000
"BIM-JOBBQ" with passw. "*JOBBQ"	600
"BIM-INSTALL-500"	4000
"(System)"	1500

i.e. the BIM-system under which your applications are to run. Explanation in the BIM Application Development Manual.
NOTE: Can only be 3 or 4 characters long.

NOTE: BIM-INSTALL-500 requires a lot more space in this version.

Example - Creating "BIM-USER":¶

a) Log on as user "SYSTEM"

b) @CREATE-USER BIM-USER

c) @CREATE-USER <Directory>:BIM-USER The directory choice is yours.

d) @GIVE-USER-SPACE <Directory>:BIM-USER,4000

To change a password use the command:

@CHANGE-PASSWORD <old_password>,<new_password>

logged on as the user in question (i.e. BIM-JOBBQ).

Page 5¶

Program Description¶

Date: 88.06.02
Norsk Data A.S
Page 5 of 16

Product
Name: BIM for ND-500/5000
Reg. no.: 210938C
Category: ROY

5.3 File Access Requirements¶

To ensure that the files which will be generated on your computer have the correct accesses, use the "@SET-DEFAULT-FILE-ACCESS" command for each of the above created users with the following parameters:

	PUBLIC	FRIEND	OWN
BIM	RWACD	RWACD	RWACD
BIM-USER	RWAC	RWAC	RWACD
BIM-PRINT	RWACD	RWACD	RWACD
BIM-JOBBQ	RWACD	RWACD	RWACD
BIM-INSTALL-500	R	RWAC	RWACD
\<System>	RWACD	RWACD	RWACD

Alternatively you can create "BIM-USER" and "BIM-JOBBQ" as friends of the "" user and take away the public access WACD from the "" user.

EXAMPLE - Setting correct access on "\<System>" :

a) Log on as user "\<System>"

b) @SET-DEFAULT-FILE-ACCESS RWACD,RWACD,RWACD

To create "BIM-USER" and "BIM-JOBBQ" as friends of "\<System>" you log on as user "\<System>" and write

@CREATE-FRIEND BIM-USER

@CREATE-FRIEND BIM-JOBBQ

@SET-FRIEND-ACCESS BIM-USER,RWAC

@SET-FRIEND-ACCESS BIM-JOBBQ,RWACD

ooo ND Norsk Data ooo
Scanned by Jonny Oddene for Sintran Data © 2011

Page 6¶

Program Description¶

Date	Norsk Data A.S	Page 6 of 16
Product	Name	Reg. no.
BIM for ND-500/5000		210938C

5.4 WHERE/HOW TO COPY FILES¶

BIM is supplied on six diskettes (double density) with the directory names (210938C-XX-01D), (210938C-XX-02D) ...... (210938C-XX-06D).

If BIM is already installed on your machine, the complete contents of the BIM-INSTALL-500 user should be deleted before continuing, i.e., including the domains. It is assumed that you have the diskettes of the previous version as backup. To delete files, the DELETE-USER-FILES Sintran command is used when logged on as user BIM-INSTALL-500. Domains are deleted with the DELETE-DOMAIN command in the Linkage Loader while logged on as user BIM-INSTALL-500. Use the LIST-DOMAIN command to see which domains to delete. To enter the Linkage Loader, you normally only have to write "LINKAGE-LOADER" in Sintran.

The copy procedure: All files are first copied to user BIM-INSTALL-500. The diskette sequence is NOT significant. Repeat instructions 1 to 3 in the description below for every diskette.

Insert the diskette marked 210938C<rev>-XX-<diskettno>D in a free floppy disk unit and enter the directory:
```
@ENTER-DIRECTORY 210938C<rev>-XX-<diskettno>D,<Device>,<Unit>,
```
where <Device> and <Unit> is specified on your diskdrive.

Enter the Backup-system and copy all files on this diskette to user "BIM-INSTALL-500" by giving the commands

@BACKUP-SYSTEM

Ba-sy: COPY-USER-FILES

Destination type: DIRECTORY
Destination directory name '';
Destination user name 'SYSTEM': BIM-INSTALL-500

Source type: DIRECTORY
Source directory name '': 210938C<rev>-XX-<diskettno>D
Source user name '......': FLOPPY-USER
Source file name '';

Manual select? LIST

(A list will appear as the files are copied)

<no of files on diskette> files copied

Ba-sy: EXIT

   ooo  ND Norsk Data  ooo

Page 7¶

Norsk Data A.S Program Description¶

Date: 88.06.02
Page: 7 of 16

Product	Reg. no.	Category
BIM for ND-500/5000	210938C	ROY

Instructions¶

3) @RELEASE-DIRECTORY 210938C<rev>-XX-<disketteno>)D

Take the diskette out of the disk drive.

4) You are now finished with the diskettes, but some files must be copied/moved to user BIM-USER from BIM-INSTALL-500. The easiest way to do this is by using the Backup System again, logged on as user BIM-USER. The files concerned are:

### Parameterfiles for Compiler:

- BIM-KOPAON-:TEXT - BIM-KOPABC-:TEXT

### All :DATA Files + :ISAM & :COPY Files:

- BIM-BRUKINIT-:DATA - BIM-INITSYST-:DATA - BIM-INITUSER-:DATA - BIM-DEVN500-:DATA - BIM-PBPBIBL-:DATA - BIM-PBPBIBL-:ISAM

NOTE: First installation of BIM only:
- BIM-CALLSPEC-:COPY

### English or Norwegian Error Msg. Files:

- BIM-PMELD-NO-:TEXT or BIM-PMELD-EN-:TEXT - BIM-KMELD-NO-:TEXT or BIM-KMELD-EN-:TEXT

The copied files may now be deleted on user BIM-INSTALL-500. Old versions of the listed files on user BIM-USER may also be deleted.

5) If you are creating a BIM Application System, there is one file to be copied from user "BIM-USER" to user "". Use the COPY-FILE command entered as user "":

@COPY-FILE

- Destination file: "BIM-INITUSER-:DATA" - Source file: (BIM-USER)BIM-INITUSER-:DATA

(The name of the destination file is optional)

ooo ND Norsk Data ooo

Page 8¶

Program Description¶

Date	Norsk Data A.S	Page 8 of 16
Product	Name	Reg. no.
BIM for ND-500/5000	210938C	ROY

5.5 Getting BIM Started¶

Before linking up BIM, ISAM and COBOL must be properly installed. This is done by running the two mode files logged on as user BIM-INSTALL-500

@MODE IS-MULTI-K00:MODE,,,

and

@MODE COBOL-LIB-J03PRE:MODE,,,

Note: BIM assumes as default that device no. 300B is unreserved so that multi-user ISAM can use this. If this is not the case on your machine, edit the file

(BIM-USER)BIM-DEVN500-A<rev>:DATA

by specifying the device number of a free device. An explanation of how to do this is given on the file. You can find out if a device is reserved with the commands

@LIST-DEVICE <device no.>,0

and/or

@LIST-DEVICE <device no.>,1

(depending on device)

ooo ND Norsk Data ooo

Page 9¶

Program Description¶

Product	Name	Reg. no.	Category
	BIM for ND-500/5000	210938C	ROY

5.5.1 Linking Up BIM¶

Read the complete section before starting the linking!!!!!

SPECIALS:¶

If your system contains specials i.e. non BIM subroutines, the (BIM-INSTALL-500)BIM-USEREXI-C<rev>:SYMB file must be recompiled (target file = (BIM-INSTALL-500)BIM-USEREXI-C<rev>:NRF) before the linking starts. This requires the COBOL compiler of course. (To see which specials are compiled into BIM, you can look at the file (BIM-USER)BIM-CALLSPEC-C<rev>:COPY which contains the COBOL calls to these routines.) If this isn't done before linking BIM, attempts to enter a special routine will result in an error message runtime indicating that recompilation/linking has been forgotten. In the same way new :COPY files for the specials must be generated by using the C version of the BIM compiler on the calling BIM programs. Then the specials must be recompiled with the COBOL compiler. This indicates that the BIM compiler perhaps should be linked first in an environment with specials. Otherwise the processors must be linked twice (Compilation ordering can be done in the B version of the processor).

NOTE:
If you have BIM as a Standard Domain on your machine already, it is important to delete the standard domain before the new linking starts (must be done from user SYSTEM in the ND-500/5000 monitor).

The linking is taken care of by the set of modefiles

(BIM-INSTALL-500)BIM-DUMMY-C<rev>:MODE
(BIM-INSTALL-500)BIM-MBI500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MBB500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MK0500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MFI500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MFC500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MOD500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MOF500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MRF500L-C<rev>:MODE
(BIM-INSTALL-500)BIM-MSB500L-C<rev>:MODE

or the main modefile

(BIM-INSTALL-500)BIM-TOOL-LNK-C<rev>:MODE

which executes the above modefiles in correct order.

NOTE:
The modefiles must be run while logged on as user BIM-USER (to get the domains placed on BIM-USER). Ignore redefinition warnings from Linkage-Loader when linking the COBOL library (error in Linkage Loader).

ooo ND Norsk Data ooo

Page 10¶

Norsk Data A.S¶

Program Description¶

Date	Product	Reg. no.	Category
88.06.02	BIM for ND-500/5000	210938C	ROY

About the Linking Jobs:¶

To help understand this explanation it is useful to have the last page of the file BIM-MBI500L-<Crev>:MODE displayed in an editor. The linking jobs are prepared for linking standard SIBAS version F and English NOTIS WP version M07 installations, but they also contain the SIBAS/R and NOTIS WP version N link commands commented out with "@@" in column 1 and 2.

In the following, the SIBAS notes concern the files BIM-DUMMY-<Crev>:MODE, BIM-MBB500L-<Crev>:MODE and -MBI500L:MODE file while the NOTIS WP notes only are relevant for the -MBI500L:MODE file. The Infologic applications notes concern the BIM-MBI500L-<Crev>:MODE and BIM-MBB500L-<Crev>:MODE files.

If/when SIBAS/R is required, the linking jobs must be edited. This is done by commenting the lines:

LOAD-SEGMENT (BIM-I-500)BIM-STOWIDE-DUMM:NRF
LOAD-SEGMENT (BIM-I-500)BIM-GETWIDE-DUMM:NRF
FORCE-SEGMENT-LINK (SIB2-500)SIBAS-LIBARARY-F

with "@@" and taking away the ("@@") comments in the lines:

@@LOAD-SEGMENT (BIM-I-500)BIM-STOWIDE-<Crev>:NRF
@@LOAD-SEGMENT (BIM-I-500)BIM-GETWIDE-<Crev>:NRF
@@FORCE-SEGMENT-LINK (SIB2-500)SIBR-LIBARARY-A
@@ELINK-SEGMENT (SIB2-500)SIBR-MESS-TS-A

Similarly, you change from NOTIS WP version M to version N by commenting:

LOAD-SEGMENT (BIM-I-500)BIM-CALLWP:NRF
FORCE-SEGMENT-LINK (NOTIS)NOTIS-WP-EN-M

(language code "EN" may be changed to "NO" if desired)

and taking away the comments in the lines:

@@LOAD-SEGMENT (BIM-I-500)BIM-CALLWPN:NRF
@@FORCE-SEGMENT-LINK (NOTIS)WP-500-N

ooo ND Norsk Data ooo

Page 11¶

Program Description¶

Date	Norsk Data A.S	Page 11 of 16
Product	Name	Reg. no.
	BIM for ND-500/5000	210938C

NOTE:

Due to error in the NOTIS-WP version N, User Environment must be installed WITHOUT UE-scratch files if you want to use this WP version. To find out if User Environment uses UE-scratch files, use the SINTRAN command LIST-OPEN-FILES (from any Sintran user). If there is a file in the displayed list with name "UE--:DATA" UE-scratch files are in use.

Also note that the linking jobs DO NOT contain revision reference to either the SIBAS-LIBRARY-F or SIB-MESSAGE-F. Therefore if you have more than one F version of SIBAS installed on your machine, the linking jobs must be edited so that they refer to the correct (and unique) version.

Finally if you are an Infologic customer, the lines:

LOAD-SEGMENT (BIM-I-500)BIM-CBIMPRO-C<rev>:NRF
LOAD-SEGMENT (BIM-I-500)BIM-CBPKOPI-C<rev>:NRF

in -MBI500L:MODE file and

LOAD-SEGMENT (BIM-I-500)BIM-CBBEXEC-C<rev>:NRF
LOAD-SEGMENT (BIM-I-500)BIM-CBPKOPI-C<rev>:NRF

in -MBB500L:MODE file must be commented (with "@@"), and the comments in the equivalent lines

@@LOAD-SEGMENT (BIM-I-500)BIM-CBIMPRO-INFO:NRF
@@LOAD-SEGMENT (BIM-I-500)BIM-CBBEXEC-INFO:NRF
@@LOAD-SEGMENT (BIM-I-500)BIM-CBPKOPI-INFO:NRF

must be removed.

In case you execute the modejobs manually i.e. one at a time, it is ESSENTIAL that you run "BIM-DUMMY-C:MODE" BEFORE any of the other mode-jobs. The sequence of the other files is optional. Notice that the linking takes quite a long time (1/2 - 1 hour). To run a mode job, log on as user "BIM-USER" and give the command

@MODE (BIM-INSTALL-500)<file-name>:MODE,<output file>

Unedited, the execution of "BIM-TOOL-LNK-C:MODE" will use your terminal as output file. If you want a permanent link list, you must edit the "BIM-TOOL-LNK-C:MODE" file accordingly. Remember to check the output from the link job.

ooo ND Norsk Data ooo

Page 12¶

Norsk Data A.S¶

PROGRAM DESCRIPTION

Date	Page
88.06.02	12 of 16

Product	Name	Reg. no.	Category
	BIM for ND-500/5000	210938C	ROY

Time-out:¶

It is recommended NOT to use the time-out feature when running BIM. This avoids unnecessary setting of error flags on ISAM files and SIBAS problems. To disable the time-out function, give the following commands from user system:

@SINTRAN-SERVICE
*BACKGROUND-ALLOCATION-UTILITIES
TIMEOUT-OFF
Y
Y
Y
EXIT
*EXIT

5.5.2 Initiating Procedure¶

In BIM you must choose the system message language at installation time. This was probably done when you copied the message files from BIM-INSTALL-500 to BIM-USER. Internally BIM only refers to one (language independent) file name where it expects to find the messages. Therefore the selected message files must be renamed to these names. This is done by using the Sintran command RENAME-FILE while logged on as BIM-USER:

@RENAME-FILE BIM-PMELD-<languagecode>-<rev>:TEXT,BIM-PMELDIN:TEXT

and

@RENAME-FILE BIM-KMELD-<languagecode>-<rev>:TEXT,BIM-KMELDIN:TEXT

i.e. BIM uses BIM-PMELDIN:TEXT and BIM-KMELDIN:TEXT internally.

ooo ND Norsk Data ooo

Page 13¶

Reinstallation of BIM¶

If you already have BIM, and are only installing a new version, we suggest the following procedure to be followed from here on:

Don't run the BIM-INITSY-C program (below); you already have all the catalogues you need.

The table catalogue is the key to all other catalogues and programs in the system. Since the contents of your table catalogue is unaltered using this procedure, you should still be able to run BIM as before (i.e., with the old BIM system program library) with one exception: BIM versions > A19 cannot use older BIM system program libraries (this causes a runtime error) which means that you cannot enter the C version of BIM before the table catalogue refers to a version larger than A19 of the BIM system program library. At the same time it is impossible to alter the table catalogue reference from outside BIM. If you are in this situation (or if the old program library has been deleted), you have to use a trick: Delete/rename the old program library (to anything other than the old name). Then rename the new library (version C) with the old name/version (version A or B). BIM-C will now run with the new BIM system program library because the program library now has the same name as that referred to in the table catalogue. (The BIM system program library is contained on the two Sintran files "BIM-PBPBIBL-:DATA" and "BIM-PBPBIBL-:ISAM").

To get the correct version suffix back on the program library name (=<C>) edit the referenced program library's name in DTAB to "BIM-PBPBIBL-C" by entering system = BIM, Org.unit = TEST, version = 0120 and table name = BPBIBL in DTAB's heading fields before using F5 = get and then the editing. Leave BIM and rename the library back to the C version suffix.

If you haven't edited the reference (=updated version) to the BIM system program library in DTAB or done any renaming in Sintran as outlined above, you will now be running the C version of BIM with an old BIM system program library. To run the new program library, just edit the reference in DTAB as described above.

To get a better understanding of the table catalogue, you are recommended to study the program "DTAB" (= update table catalogue) some more by looking at the other file references in the table catalogue.

Date	Norsk Data A.S	Page 13 of 16
Product	Name	Reg. no.
BIM for ND-500/5000	210938C	ROY

ooo   ND Norsk Data   ooo

Page 14¶

----------------------------------------------------------------------
| Date 88.06.02       | Norsk Data A.S                         | Page 14 of 16 |
|---------------------|----------------------------------------|--------------|
| PROGRAM DESCRIPTION                                                  |
|----------------------------------------------------------------------|
| Product            | Name                                    | Reg. no.   | Category |
|--------------------|-----------------------------------------|------------|----------|
|                    | BIM for ND-500/5000                     | 210938C    | ROY      |
----------------------------------------------------------------------

# FIRST INSTALLATION OF BIM:

Before it is possible to enter BIM, some BIM system catalogues must be generated/initiated (ISAM files). This is done by running the program

@END BIM-INITSYS-C<rev>

logged on as user "BIM-USER". When prompted for "INPUT FILE?" you answer

BIM-INITSYST-C<rev>:DATA

You will then see/get some messages concerning the catalogues which are being created.
(The table catalogue MUST be stored on user "BIM-USER". For all other catalogues the user is optional. Unedited, "BIM-INITSYST-B<rev>" puts all the catalogues on "BIM-USER".)

Finally the user-catalogue is initiated by entering ISAM-SERVICE logged on as user "BIM-USER" and giving the following commands:

@{BIM-USER}ISAM-SERVICE

>>OPEN BIM-PBRUKAT-A00

>>LOAD BIM-BRUKINIT-A00:DATA

Number of records loaded : 4

>>EXIT

This makes the BIM-users "SYSTEM" with password "TURBOX", "BATCH1" with password "BATCH1", "BATCH2" with password "BATCH2" and "BATCH3" with password "BATCH3" known to BIM  
**NOTE:** Has nothing to do with Sintran users.

To start BIM use the command

@END (BIM-USER)BIM-C<rev>

**NOTE:** JEC must be dumped reentrant or lie on user SYSTEM to get all parts of the system to operate properly.

ooo    ND Norsk Data    ooo

Page 15¶

Program Description¶

Date	Norsk Data A.S	Page 15 of 16
	PROGRAM DESCRIPTION
Product	Name	Reg. no.
BIM for ND-500/5000		210938C

The first time you enter BIM the password "TURBOX" MUST be used. If you make a mistake doing this and BIM responds by not accepting the password, clear the message by using the left tabulator key and try again. It is ESSENTIAL that once you are logged on in BIM for the first time, you select the combination

Org.unit: TEST  System: BIM  Program: USYSP

on the bottom line of the screen and execute this program using the "EXECUTE" key. First you are asked whether you want to continue or not. Answer "Y". When prompted for computer type, <CR> will give you ND-500/5000. The program "USYSP" fills the BIM table catalogue with necessary program references.

5.6 Getting a BIM-System Started¶

Equivalent to the previous section, the program

@ND (BIM-USER)BIM-INITSYS-C<rev>

must be run from user *<System>* to create the necessary catalogues and to make the new system known to BIM (i.e. the table catalogue on BIM-USER is updated by the program). This time however, use the file

BIM-INITUSER-C<rev>:DATA on user <System>

as input-file AFTER it has been copied from "BIM-USER" and edited. The required editing is described in detail on the file itself.

To run several systems under BIM repeat what has been said about the <System> user for each system.

                 ooo ND Norsk Data ooo

Page 16¶

+---------------------+-------------------+-----------------+----------+
| Date: 88.06.02      | Norsk Data A.S    | Page 16 of 16   |          |
| PROGRAM DESCRIPTION |                   |                 |          |
+---------------------+-------------------+-----------------+----------+
| Product             | Name              | Reg. no.        | Category |
|                     | BIM for ND-500/5000 | 210938C        | ROY      |
+---------------------+-------------------+-----------------+----------+

5.7 Full Catalogue¶

The following explanation does not relate to installation, but is included in the PD sheet in case the situation occurs.

As mentioned all ISAM files (= catalogues) must be continuous. Should you ever experience that a catalogue is full, follow these instructions:

a) Enter ISAM-SERVICE and unload the full file to a userspecified file:

@(BIM-USER)ISAM-SERVICE

>>OPEN <isam file>

>>UNLOAD "<user specified file>"

Number of records unloaded: nn

>>EXIT

b) Rename the full ISAM file (i.e. both the OS-files) with the commands

@RENAME-FILE <old name>:DATA,<new name>:DATA
@RENAME-FILE <old name>:ISAM,<new name>:ISAM

while logged on as the user where the files are stored.

c) Create the original ISAM file again, but this time as a larger continuous file. This is done by running the program

@ND (BIM-USER)BIM-INITSY-C<rev>

again, but with a re-edited version of the file

BIM-INITUSER-A<rev>:DATA on user <System>
or BIM-INITSYST-B<rev>:DATA on user "BIM-USER"

as input. The re-editing consists of specifying a larger number of records (=rows) for the file in question, and writing "N" in the column for "Create file (Y/N)" on the other files and make these lines comments by writing "**" in column no. 1.

Note: There must be enough unused continuous space on the owner of the ISAM file to create the new file.

d) Enter ISAM-SERVICE and load the unloaded file back to the original file as described in section 5.6, this time using the file-names from above instead, of course. If the operation was successful, the renamed files can be deleted.

ooo ND Norsk Data ooo

Scanned by Jonny Oddene for Sintran Data © 2011

Page 17¶

ND Software Library Diskette¶

Page 1¶

Directory Name:
210938C01-XX-01D

Containing:
BIM for ND-500/5000

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	BIM-CBBBBPG-C01	NRF	I	RWACD	RWACD	RWACD	29	56582
1	BIM-CBBBKAT-C01	NRF	I	RWACD	RWACD	RWACD	12	21562
2	BIM-CBBEXEC-C01	NRF	I	RWACD	RWACD	RWACD	45	89217
3	BIM-CBBFEIL-C01	NRF	I	RWACD	RWACD	RWACD	9	14837
4	BIM-CBBINIT-C01	NRF	I	RWACD	RWACD	RWACD	115	232269
5	BIM-CBBINTT-C01	NRF	I	RWACD	RWACD	RWACD	14	26352
6	BIM-CBBINUT-C01	NRF	I	RWACD	RWACD	RWACD	14	25662
7	BIM-CBBKALI-C01	NRF	I	RWACD	RWACD	RWACD	10	17700
8	BIM-CBBMESS-C01	NRF	I	RWACD	RWACD	RWACD	4	4456
9	BIM-CBBRYDD-C01	NRF	I	RWACD	RWACD	RWACD	19	36057
10	BIM-CBBSPOL-C01	NRF	I	RWACD	RWACD	RWACD	14	24638
11	BIM-CBBTNXT-C01	NRF	I	RWACD	RWACD	RWACD	24	45251
12	BIM-CBBTOPT-C01	NRF	I	RWACD	RWACD	RWACD	12	21878
13	BIM-CBBTPOS-C01	NRF	I	RWACD	RWACD	RWACD	12	21038
14	BIM-CBBTRYK-C01	NRF	I	RWACD	RWACD	RWACD	18	33899
15	BIM-CBBUTSK-C01	NRF	I	RWACD	RWACD	RWACD	12	20896
16	BIM-CBBUTSN-C01	NRF	I	RWACD	RWACD	RWACD	34	66543
17	BIM-CBIMPRO-C01	NRF	I	RWACD	RWACD	RWACD	65	192919
18	BIM-CBALFA-C01	NRF	I	RWACD	RWACD	RWACD	7	11408
19	BIM-CBBPEST-C01	NRF	I	RWACD	RWACD	RWACD	12	20526
20	BIM-CBBPRFG-C01	NRF	I	RWACD	RWACD	RWACD	15	26904
21	BIM-CBPBSJK-C01	NRF	I	RWACD	RWACD	RWACD	12	21541
22	BIM-CBPCOMD-C01	NRF	I	RWACD	RWACD	RWACD	16	29299
23	BIM-CBPCRIT-C01	NRF	I	RWACD	RWACD	RWACD	12	21784
24	BIM-CBPDEBU-C01	NRF	I	RWACD	RWACD	RWACD	17	31987
25	BIM-CBPDISP-C01	NRF	I	RWACD	RWACD	RWACD	11	19389
26	BIM-CBPDPSL-C01	NRF	I	RWACD	RWACD	RWACD	15	27728
27	BIM-CBPDUMP-C01	NRF	I	RWACD	RWACD	RWACD	26	51049

28 files using 605 pages. 610 pages reserved out of 610 pages.

Page 18¶

ND Software Library Diskette¶

Page 1¶

Containing:

BIM for ND-500/5000

Directory Name:

210938C01-XX-02D

User Name: FLOPPY-USER

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	BIM-CBPFEIL-C01	NRF	I	RWACD	RWACD	RWACD	12	20755
1	BIM-CBPFORM-C01	NRF	I	RWACD	RWACD	RWACD	10	18240
2	BIM-CBPHVIS-C01	NRF	I	RWACD	RWACD	RWACD	8	13612
3	BIM-CBPINIT-C01	NRF	I	RWACD	RWACD	RWACD	122	247795
4	BIM-CBPISAM-C01	NRF	I	RWACD	RWACD	RWACD	28	53369
5	BIM-CBPKALK-C01	NRF	I	RWACD	RWACD	RWACD	19	36343
6	BIM-CBPKALL-C01	NRF	I	RWACD	RWACD	RWACD	12	21440
7	BIM-CBPKOMN-C01	NRF	I	RWACD	RWACD	RWACD	14	25998
8	BIM-CBPKOPT-C01	NRF	I	RWACD	RWACD	RWACD	15	27838
9	BIM-CBPKRPT-C01	NRF	I	RWACD	RWACD	RWACD	3	2971
10	BIM-CBPMERK-C01	NRF	I	RWACD	RWACD	RWACD	15	28630
11	BIM-CBPMESS-C01	NRF	I	RWACD	RWACD	RWACD	2	1913
12	BIM-CBPMODE-C01	NRF	I	RWACD	RWACD	RWACD	13	23484
13	BIM-CBPOPEN-C01	NRF	I	RWACD	RWACD	RWACD	7	2270
14	BIM-CBPOVFL-C01	NRF	I	RWACD	RWACD	RWACD	12	12110
15	BIM-CBPASS-C01	NRF	I	RWACD	RWACD	RWACD	15	28082
16	BIM-CBPYYDD-C01	NRF	I	RWACD	RWACD	RWACD	17	32621
17	BIM-CBPSIBA-C01	NRF	I	RWACD	RWACD	RWACD	44	87565
18	BIM-CBPSYFE-C01	NRF	I	RWACD	RWACD	RWACD	16	29532
19	BIM-CBPTAND-C01	NRF	I	RWACD	RWACD	RWACD	39	76262
20	BIM-CBPTEND-C01	NRF	I	RWACD	RWACD	RWACD	35	69616
21	BIM-CBPTFLI-C01	NRF	I	RWACD	RWACD	RWACD	29	55943
22	BIM-CBPTINI-C01	NRF	I	RWACD	RWACD	RWACD	26	49244
23	BIM-CBPTRUL-C01	NRF	I	RWACD	RWACD	RWACD	25	48192
24	BIM-CBPTXBE-C01	NRF	I	RWACD	RWACD	RWACD	14	25157
25	BIM-CBPUTSK-C01	NRF	I	RWACD	RWACD	RWACD	10	16550
26	BIM-CBPVALG-C01	NRF	I	RWACD	RWACD	RWACD	15	27429
27	BIM-CBCHAIN-C01	NRF	I	RWACD	RWACD	RWACD	10	17616
28	BIM-CBINIT-C01	NRF	I	RWACD	RWACD	RWACD	3	2114
29	BIM-CFCDATA-C01	NRF	I	RWACD	RWACD	RWACD	5	7235

30 files using 596 pages. 610 pages reserved out of 610 pages.

Page 19¶

ND Software Library Diskette¶

Page 1¶

Containing:
BIM for ND-500/5000

Directory Name:
210938C01-XX-03D

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	BIM-CFCFEIL-C01	NRF	I	RWACD	RWACD	RWACD	5	7481
1	BIM-CFCFELT-C01	NRF	I	RWACD	RWACD	RWACD	13	24434
2	BIM-CFCFORM-C01	NRF	I	RWACD	RWACD	RWACD	11	19026
3	BIM-CFCINIT-C01	NRF	I	RWACD	RWACD	RWACD	6	8275
4	BIM-CFCKLAR-C01	NRF	I	RWACD	RWACD	RWACD	28	53356
5	BIM-CFCLINJ-C01	NRF	I	RWACD	RWACD	RWACD	5	8129
6	BIM-CFCMAIN-C01	NRF	I	RWACD	RWACD	RWACD	78	156634
7	BIM-CFCMERK-C01	NRF	I	RWACD	RWACD	RWACD	6	8607
8	BIM-CFCOPEN-C01	NRF	I	RWACD	RWACD	RWACD	6	9548
9	BIM-CFCPAKK-C01	NRF	I	RWACD	RWACD	RWACD	12	22073
10	BIM-CFCPRT-C01	NRF	I	RWACD	RWACD	RWACD	13	22654
11	BIM-CFCRAMM-C01	NRF	I	RWACD	RWACD	RWACD	6	9871
12	BIM-CFCSEEK-C01	NRF	I	RWACD	RWACD	RWACD	12	21447
13	BIM-CFCSKRV-C01	NRF	I	RWACD	RWACD	RWACD	8	13430
14	BIM-CFCSTRT-C01	NRF	I	RWACD	RWACD	RWACD	33	63879
15	BIM-CFCFAST-C01	NRF	I	RWACD	RWACD	RWACD	12	22007
16	BIM-CFCTTAB-C01	NRF	I	RWACD	RWACD	RWACD	13	24028
17	BIM-CFCUMRK-C01	NRF	I	RWACD	RWACD	RWACD	5	7572
18	BIM-CFCVIGN-C01	NRF	I	RWACD	RWACD	RWACD	7	11080
19	BIM-CINIFIX-C01	NRF	I	RWACD	RWACD	RWACD	5	7161
20	BIM-CISFELI-C01	NRF	I	RWACD	RWACD	RWACD	4	4757
21	BIM-CISINIT-C01	NRF	I	RWACD	RWACD	RWACD	17	30750
22	BIM-CKOADR-C01	NRF	I	RWACD	RWACD	RWACD	2	1106
23	BIM-CKOBKUP-C01	NRF	I	RWACD	RWACD	RWACD	5	6157
24	BIM-CKOBLKT-C01	NRF	I	RWACD	RWACD	RWACD	6	10111
25	BIM-CKOBPIN-C01	NRF	I	RWACD	RWACD	RWACD	9	15929
26	BIM-CKOBPUT-C01	NRF	I	RWACD	RWACD	RWACD	13	23846
27	BIM-CKODELU-C01	NRF	I	RWACD	RWACD	RWACD	15	27271
28	BIM-CKOEDIT-C01	NRF	I	RWACD	RWACD	RWACD	9	15989
29	BIM-CKOFFEI-C01	NRF	I	RWACD	RWACD	RWACD	10	17627

Page 20¶

ND Software Library Diskette¶

Page 2¶

Containing:

BIM for ND-500/5000

Directory Name:
210938C01-XX-03D

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
30	BIM-CKOFOCO-C01	NRF	I	RWACD	RWACD	RWACD	15	27948
31	BIM-CKOFORM-C01	NRF	I	RWACD	RWACD	RWACD	27	52294
32	BIM-CKOINIT-C01	NRF	I	RWACD	RWACD	RWACD	12	21904
33	BIM-CKOINST-C01	NRF	I	RWACD	RWACD	RWACD	57	114358
34	BIM-CKOLTXT-C01	NRF	I	RWACD	RWACD	RWACD	17	32322
35	BIM-CKOMACI-C01	NRF	I	RWACD	RWACD	RWACD	10	17026
36	BIM-CKOMELD-C01	NRF	I	RWACD	RWACD	RWACD	2	1913
37	BIM-CKONST-C01	NRF	I	RWACD	RWACD	RWACD	6	8505
38	BIM-CKOPARM-C01	NRF	I	RWACD	RWACD	RWACD	17	30725
39	BIM-CKOPAS1-C01	NRF	I	RWACD	RWACD	RWACD	13	23643
40	BIM-CKOPAS2-C01	NRF	I	RWACD	RWACD	RWACD	8	12897
41	BIM-CKOSORT-C01	NRF	I	RWACD	RWACD	RWACD	6	8560
42	BIM-CKOTABU-C01	NRF	I	RWACD	RWACD	RWACD	6	9248
43	BIM-CKOUTSK-C01	NRF	I	RWACD	RWACD	RWACD	6	8740
44	BIM-CKVINIT-C01	NRF	I	RWACD	RWACD	RWACD	6	8837
45	BIM-CMELDIN-C01	NRF	I	RWACD	RWACD	RWACD	4	4710

46 files using 586 pages. 610 pages reserved out of 610 pages.

Page 21¶

ND Software Library Diskette¶

Containing:¶

BIM for ND-500/5000

PAGE	1
Directory Name:	210938C01-XX-04D

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	BIM-CMETOLK-C01	NRF	I	RWACD	RWACD	RWACD	8	13417
1	BIM-COPRDRL-C01	NRF	I	RWACD	RWACD	RWACD	28	55164
2	BIM-COPRFIL-C01	NRF	I	RWACD	RWACD	RWACD	16	30688
3	BIM-COPRINI-C01	NRF	I	RWACD	RWACD	RWACD	5	6489
4	BIM-COPRSJK-C01	NRF	I	RWACD	RWACD	RWACD	7	11644
5	BIM-COPWIDE-C01	NRF	I	RWACD	RWACD	RWACD	22	41495
6	BIM-CPUINST-C01	NRF	I	RWACD	RWACD	RWACD	11	18573
7	BIM-CREINIT-C01	NRF	I	RWACD	RWACD	RWACD	8	12584
8	BIM-CREMELD-C01	NRF	I	RWACD	RWACD	RWACD	4	4231
9	BIM-CRESFLG-C01	NRF	I	RWACD	RWACD	RWACD	9	15491
10	BIM-CSIFIEL-C01	NRF	I	RWACD	RWACD	RWACD	7	10987
11	BIM-CSIINIT-C01	NRF	I	RWACD	RWACD	RWACD	18	32943
12	BIM-DEVBUFF-C01	NRF	I	RWACD	RWACD	RWACD	2	1128
13	BIM-GETWIDE-C01	NRF	I	RWACD	RWACD	RWACD	22	41713
14	BIM-HBIMBAT-C01	NRF	I	RWACD	RWACD	RWACD	28	54641
15	BIM-HFCPRT-C01	NRF	I	RWACD	RWACD	RWACD	9	14667
16	BIM-HINITFIL-C01	NRF	I	RWACD	RWACD	RWACD	11	18969
17	BIM-HINITSY-C01	NRF	I	RWACD	RWACD	RWACD	16	30283
18	BIM-HKOMPIL-C01	NRF	I	RWACD	RWACD	RWACD	23	44753
19	BIM-HOPRDRL-C01	NRF	I	RWACD	RWACD	RWACD	10	16616
20	BIM-HOPRFIL-C01	NRF	I	RWACD	RWACD	RWACD	5	7419
21	BIM-HORRPAS-C01	NRF	I	RWACD	RWACD	RWACD	14	25229
22	BIM-HRESFLG-C01	NRF	I	RWACD	RWACD	RWACD	6	8877
23	BIM-HSYSFEM-C01	NRF	I	RWACD	RWACD	RWACD	36	71148
24	BIM-SPECGEN-C01	NRF	I	RWACD	RWACD	RWACD	24	46565
25	BIM-STOPBAT-C01	NRF	I	RWACD	RWACD	RWACD	13	23232
26	BIM-STOWIDE-C01	NRF	I	RWACD	RWACD	RWACD	22	41500
27	BIM-USEREXI-C01	NRF	I	RWACD	RWACD	RWACD	16	25972
28	BIM-USEREXI-C01	SYMB	I	RWACD	RWACD	RWACD	41	65707
29	BIM-CALLSPEC-C01	COPY	I	RWACD	RWACD	RWACD	1	0

  ----------------------
  | CONTINUED          |
  ----------------------

Page 22¶

MD Software Library Diskette¶

Page 2¶

Containing:
BIM for ND-500/5000

Directory Name:
210938C01-XX-04D

User Name: FLOPPY-USER¶

No	File Name	Type	T	Public	Friend	Own	Pages	Bytes
30	BIM-GETWIDE-DUMM	NRF	I	RWACD	RWACD	RWACD	14	26055
31	BIM-STOWIDE-DUMM	NRF	I	RWACD	RWACD	RWACD	14	26060
32	BIM-TOOL-LNK-C01	MODE	I	RWACD	RWACD	RWACD	2	542
33	BIM-DUMMY-C01	MODE	I	RWACD	RWACD	RWACD	2	967
34	BIM-MBI500L-C01	MODE	I	RWACD	RWACD	RWACD	4	4645
35	BIM-MB500L-C01	MODE	I	RWACD	RWACD	RWACD	3	3407
36	BIM-MK0500L-C01	MODE	I	RWACD	RWACD	RWACD	3	2160
37	BIM-MFI500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1204
38	BIM-MFC500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1469
39	BIM-MOD500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1287
40	BIM-MOF500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1291
41	BIM-MRF500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1436
42	BIM-MS500L-C01	MODE	I	RWACD	RWACD	RWACD	2	1087
43	BIM-CDEVNR-C01	NRF	I	RWACD	RWACD	RWACD	2	1144
44	BIM-CALLPWN-C01	NRF	I	RWACD	RWACD	RWACD	2	1240
45	BIM-CALLPWM-C01	NRF	I	RWACD	RWACD	RWACD	2	863
46	BIM-MOVEB-C01	NRF	I	RWACD	RWACD	RWACD	2	240
47	BIM-EDIT-C01	NRF	I	RWACD	RWACD	RWACD	2	1430
48	BIM-SCREEN-C01	NRF	I	RWACD	RWACD	RWACD	10	17653
49	BIM-KOPAB0N-C01	TEXT	I	RWACD	RWACD	RWACD	7	10981
50	BIM-KOPABC-C01	TEXT	I	RWACD	RWACD	RWACD	7	11079
51	BIM-PMELD-NO-C01	TEXT	I	RWACD	RWACD	RWACD	29	56680
52	BIM-PMELD-EN-C01	TEXT	I	RWACD	RWACD	RWACD	29	56680
53	BIM-DUMMY-C01	NRF	I	RWACD	RWACD	RWACD	2	410

54 files using 590 pages. 610 pages reserved out of 610 pages.

Page 23¶

ND Software Library Diskette¶

Page 1¶

Containing:¶

BIM for ND-500/5000

Directory Name:¶

210938C01-XX-05D

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	BIM-KMELD-NO-C01	TEXT	I	RWACD	RWACD	RWACD	30	56680
1	BIM-KMELD-EN-C01	TEXT	I	RWACD	RWACD	RWACD	29	56680
2	BIM-BRUKINIT-C01	DATA	I	RWACD	RWACD	RWACD	2	656
3	BIM-INTISYST-C01	DATA	I	RWACD	RWACD	RWACD	2	1151
4	BIM-INITUSER-C01	DATA	I	RWACD	RWACD	RWACD	5	3654
5	BIM-DEVN500-C01	DATA	I	RWACD	RWACD	RWACD	2	569
6	BIM-PBPBIBL-C01	DATA	C	RWACD	RWACD	RWACD	230	442368
7	BIM-PBPBIBL-C01	ISAM	C	RWACD	RWACD	RWACD	25	45056
8	ISAM-SERVICE-K01	PROG	I	RWACD	RWACD	RWACD	82	210944
9	IS-MULTI-K00	NRF	I	RWACD	RWACD	RWACD	2	131
10	IS-MULTI-K00	MODE	I	RWACD	RWACD	RWACD	2	646
11	COBOL-LIB-J03PRE	NRF	I	RWACD	RWACD	RWACD	140	284460
12	COBOL-LIB-J03PRE	MODE	I	RWACD	RWACD	RWACD	2	1165
13	EXCEPT-LIB-C00	NRF	I	RWACD	RWACD	RWACD	11	18474
14	MON-CALL-LIB	NRF	I	RWACD	RWACD	RWACD	4	5731

15 files using 568 pages. 610 pages reserved out of 610 pages.

Page 24¶

ND Software Library Diskette¶

Containing¶

BIM for ND-500/5000

PAGE	1
Directory Name:	210938C01-XX-06D

User Name: FLOPPY-USER¶

No	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	COBOL-LIB-J01	NRF	I	RWACD	RWACD	RWACD	116	234300
1	T4-LIBRARY	NRF	I	RWACD	RWACD	RWACD	19	35752
2	BIM-BIMED-C01	NRF	I	RWACD	RWACD	RWACD	21	40792
3	BIM-CBMEXEC-INFO	NRF	I	RWACD	RWACD	RWACD	45	90079
4	BIM-CBMIPRO-INFO	NRF	I	RWACD	RWACD	RWACD	65	130086
5	BIM-CBPKOPI-INFO	NRF	I	RWACD	RWACD	RWACD	14	24678
6	SSYLIB-500-A02	NRF	I	RWACD	RWACD	RWACD	81	162755
7	BIM-PROBAS-0120	BIM1	I	RWACD	RWACD	RWACD	8	3707

8 files using 369 pages. 610 pages reserved out of 610 pages.