Page 1¶

Norsk Data A.S. Program Description¶

Date: 86.12.09
Page: 1 of 2

Product¶

Name	ND-no.	Category
UNIQUE UNIQUICK ISAM for ND-100	210896A	ROY

Reason¶

[x] New product

Documentation¶

Title	ND-no.
UNIQUE UNIQUICK User Manual	ND-60.240.1 EN
UNIQUE UNIQUICK Brukerhåndbok	ND-60.240.1 NO

Purpose¶

Application generation for UNIQUE-II ISAM

Prerequisites¶

Computer Type	Floating format	Op. system Version
ND-100		SIN III VSX >=J

ND-no. Product Details¶

ND-no.	Product name
210073H	ISAM II, version >= H00
210731A	UNIQUE-II ISAM for ND-100 version >= A00

Prog.no. File Details¶

ND-no.	Prog.no.	File Name	Type	Containing
210455E	205489E	DDBTABLES-E02	VTM	Terminal descr.

Minimum Permanent Mass Storage Resources¶

User	User space	Number of files
DIALOG-SYS	225 pages	on 4 files

File Details¶

File no.	File Name	Type	Containing
208833A	UNIQUICK-I-A	MCRO	Load/dump jobs
208834A	UNIQUICK-I-A	BRF	UNIQUE UNIQUICK ISAM

Note: UNIQUE UNIQUICK ISAM for ND-100 version A can be used with both UNIQUE-II ISAM for ND-100 version A and UNIQUE-II ISAM for ND-100 version B (ND-no. 210731).

must be replaced by the current revision of the DIRECTORY or FILE. The revision level is found on the preceding "ND SOFTWARE LIBRARY DISKETTE" pages.

Known, But Not Corrected Errors¶

If two registers are chosen which both have the same key, UNIQUICK will produce an application which cannot be run by UNIQUE-II.

ooo ND Norsk Data ooo

Page 2¶

Installation Procedure¶

The desired user, for example DIALOG-SYS, should be given 225 pages. Copy the files from the floppy to this user-area.

Run the PERFORM system to load UNIQUICK. An example is shown below:

⊘PERFORM UNIQUICK-I-A⊘

PERFORM 2412F

Macro name (Default = LOAD-UNIQUICK-I) :[illegible]

!----------------------------------------------------------!
! Load UNIQUE UNIQUICK ISAM Version A on ND-100             !
!----------------------------------------------------------!
! NB! This macro will only load the system! If you want! 
!        UNIQUICK to be reentrant DUMP-UNIQUICK must be     !
!        run from user SYSTEM after the load is OK.         !
!----------------------------------------------------------!

User name for UNIQUICK.BRF files (Default = DIALOG-SYS) :[illegible]
User name for FORTRAN library (Default = DIALOG-SYS) :[illegible]
Name of FORTRAN library (Default = FORT-2B) :[illegible]
Type version of UNIQUE-II (1 for A, 2 for B, etc.) (Default = 2) :[illegible]

⊘MODE MACRO1:MODE,,,

This :MODE file will now load UNIQUE-II. Log in as user SYSTEM and run the dump-reentrant job:

⊘PERFORM (DIA-SYS)UNIQUICK-I-A⊘

PERFORM 2412F

Macro name (Default = LOAD-UNIQUICK-I) :DUMP-UNIQUICK-I[illegible]

!----------------------------------------------------------!
! Dump UNIQUE UNIQUICK ISAM Version A reentrant             !
!----------------------------------------------------------!
! NB! If you want UNIQUICK to be reentrant you have to      !
!      run this macro from user SYSTEM                      !
!----------------------------------------------------------!

User name for :PROG file (Default = DIALOG-SYS) :[illegible]

⊘MODE MACRO1:MODE,,,

After this job is finished, the system is ready to be used.

Start the program by typing:

⊘UNIQUICK-I⊘

ooo ND Norsk Data ooo

Page 3¶

ND SOFTWARE LIBRARY DISKETTE¶

Page 1

Containing: UNIQUE UNIQICK ISAM for ND-100

Directory Name: 210896A00-XX-01D

User Name: FLOPPY-USER

File access:

Nr	File name	Type	T	Public	Friend	Own	Pages	Bytes
0	UNIQIUCK-I-A00	BRF	I	R	RWACD	RWACD	111	224941
1	UNIQIUCK-I-A00	MCRO	I	R	RWACD	RWACD	2	1616

2 files using 113 pages. 610 pages reserved out of 610 pages.