Page 1

ND Norsk Data

Product Information

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

Description of Product

4th generation language for storing, modifying and retrieving data in SIBAS database systems.

Reason(s) for New Release

 -------------------------------------------------------------
 | Revision C13.  Added functionality and error corrections. |
 | Revision C14.  Added functionality and error corrections. |
 |                                                           |
 | Minor significant changes in this PI-sheet are marked     |
 | with '*'.                                                 |
 -------------------------------------------------------------

Table of Contents

	Page
Prerequisites	2
Dependencies	3
Documentation	4
Installation procedure	5
Modifications	10
Errors corrected	22
Errors known but not corrected	22

 ------------------------------------------------------------
 | NOTE: The chapter MODIFICATIONS describes important new  |
 | and changed features in the C13/C14 release.             |
 | The new Quick Reference Card (see Chapter 3) presents    |
 | a summary of commands, keys and search strategies.       |
 ------------------------------------------------------------

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 2

Product Information

Product name
UNIQUE-II SIBAS for ND-110

Product number
210729C

---

1 Prerequisites

The following things are required in order to use this product.

1.1 Hardware Prerequisites

The following hardware must be present for this product to be used:

CPU type (any of the following): - 100 Standard - 100 CX - 110 Standard - 110 CX - 120 Standard - 120 CX - Butterfly Teamstation

Floating format: 32/48

1.2 Software Prerequisites

The following software must be installed on the system for this product to be used:

Operating system:

Name	Version/Revision
SINTRAN-III VSE/VSX	>= I

Other software:

Product name	Product number
SIBAS-II	210166F
Software keys	210507B
or UNIQUE Software Key
UNIQUE Text System, version >= C10	211005C
BRF-LINKER, version >= B (but not C00)	210721B
UE-PLIB, version >= C03*, included in:	210518C
NOTIS-WP (or another editor)	210079M/N*

---

Note: UNIQUE-II SIBAS for ND-110 cannot be used together with SIBAS/R version, since there is not enough room on the program segments to load this SIBAS library.

---

ND-895194.1B EN

---

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 3

PRODUCT INFORMATION

Date	Norsk Data	Page 3 of 22
Product name	UNIQUE-II SIBAS for ND-110	Product number 210729C

1.3 OTHER PREREQUISITES

The following are necessary for this product to be used.

Minimum Permanent Mass Storage:

User	Space (pages)	Number of files
DIALOG-SYS	170	2
	560	16

	Minimum	Maximum
Number of segments (ND-100)	3	4

Space required on segment files: 350 pages

Requirements regarding internal devices: None

Requirements regarding batch processors: None

2 DEPENDENCIES

In addition to the above listed hardware and/or software prerequisites, the following dependencies exist between this and other products. The hardware and software listed here may, for example, be necessary to use the product's full functionality.

2.1 HARDWARE DEPENDENCIES

None

2.2 SOFTWARE DEPENDENCIES

Product name	Product number
User Environment	210518

Nature of dependency
When User Environment is active, version C03* or later is required. If applications contain UE-variables, the corresponding values will be provided by UE.

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 4

Product Information

Date	Norsk Data	Page 4 of 22
90.01.25

Product Name

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

Product Details

Product name	Product number
NOTIS-WP	210079M/N

Nature of dependency
When using NOTIS-WP for editing UNIQUE-II applications, version M or later is required. When using version N or later, please see chapter 5.5, Other Modifications.

3 Documentation

Included (distributed free with product)

Title	Number
DIALOGUE-UNIQUE-II User Guide	ND 860206.3 EN
DIALOGUE-UNIQUE-II Brukerveiledning	ND 860206.3 NO
DIALOGUE-UNIQUE-II Programming Examples	ND 860281.1 EN
DIALOGUE-UNIQUE-II Application Development	ND 860210.3 EN
DIALOGUE-UNIQUE-II Applikasjonsutvikling	ND 860210.3 NO
DIALOGUE-UNIQUE Release Information (CIO)	ND 860352.1 EN
DIALOGUE-UNIQUE-II Quick Reference Card	ND 899202.1 EN*
DIALOGUE-UNIQUE-II Referansekort	ND 899202.1 NO*

Optional (must be purchased)

Title	Number
DIALOGUE UNIQUICK User Guide	ND 860240.2 EN
DIALOGUE UNIQUICK Brukerveiledning	ND 860240.2 NO

NIJ-895194.1B EN

---

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 5

Product Information

Date	Norsk Data	Page
90.01.25		5 of 22

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

4 Installation Procedure

4.1 Automatic Installation

4.1.1 Preparations

Prior to the installation, verify the following:

• Ensure that the user areas specified in Chapter 1.3 exist with the required number of free pages and free files. If not, find a directory having enough space to hold the user areas. The installation program will try to allocate space whenever needed, but you may need to specify on which directory to create user areas.

• The following files will be loaded with UNIQUE-II:

Abbrev. file name	Default user area(s)
SIBAS F	DIALOG-SYS, SYSTEM
UE library	UE-PLIB-P2
	USER-ENVIRONMENT

Check where these files are installed. If not installed on the default user area, the installation program will ask where to find these files.

• Ensure that your configuration fulfills all other requirements mentioned in Chapter 1 and 2.

4.1.2 Installation from Floppy

• Put the diskette 210729C-XX-01D into the floppy drive.
• Log in to user area SYSTEM.
• Enter directory 210729C-XX-01D.
• Run the INSTALL program on the diskette.

Example: How to enter the directory and start the installation program.

@ENTER-DIRECTORY 210729C-XX-01D FLOPPY-DISC-1 0↩

@(210729C:FLOPPY-USER)INSTALL↩

ND-895194.1B EN

[Scanned by Jonny Oddøe for Sintran Data © 2012]

---

Page 6

Product Information

Date	Norsk Data	Page
90.01.25		6 of 22

Product Name

UNIQUE-II SIBAS for ND-110

Product Number

210729C

---

The following screen will appear:

┌──────────────────────────────────────────────────────────────────────┐
│                             INSTALLATION                             │
│                  UNIQUE-II SIBAS ND100 VERSION Cxx                   │
├──────────────────────────────────────────────────────────────────────┤
│ Unique A/S                                 Date : 22-JUN-87          │
│ --> Initialising - please wait -->                                   │
│ --> Sintran version:K Revision:3100 Generated:15-MAY-86              │
│ --> Cpu number :456                                                  │
│                                                                      │
│ You may ESCAPE at any time to abort the installation procedure.      │
│ Choose one of the following options:                                 │
│                                                                      │
│ 1 - CREATE  : Create user and allocate space                         │
│ 2 - COPY    : Copy files from floppies                               │
│ 3 - LOAD    : Make and run load procedure                            │
│ 4 - DUMP    : Define system as reentrant program                     │
│ 5 - EXAMPLE : Install example Database and UNIQUE applications       │
│ 0 - EXIT    :                                                        │
│                                                                      │
│ Make your selection (1/2/3/4/5/0):                                   │
└──────────────────────────────────────────────────────────────────────┘

The installation program will ask you for information (user areas, directory names etc.) but will usually suggest reasonable default values. You can answer these questions by pressing ↲ (the ENTER key) thus using the default value.

You may install UNIQUE on any user area, but DIALOG-SYS is used as default in the installation program.

The installation program can do the following:

• CREATE: Create a new user area (or verify an existing one) for UNIQUE.
• COPY: Copy all files from the floppy to the desired user area.
• LOAD: Write the load procedure and load the UNIQUE ND-100 program files.
• DUMP: Dump UNIQUE as a reentrant system.
• EXAMPLE: Install the DIALOGUE example database and applications. See chapter 4.1.5.
• EXIT: Leave the installation program and return to SINTRAN.

ND-895194.1B EN

---

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 7

Product Information

Date	Norsk Data	Page
90.01.25		7 of 22

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

The first time, run all the tasks 1-4, one at a time, in sequence. To reload UNIQUE, run tasks 3 and 4. To re-dump UNIQUE, run task 4.

When selecting the CREATE or COPY option, and an (old) version exists on this user area, you are asked if these files should be deleted. You may answer Yes, No or Manually. When answering YES, program files, domain files, :MODE and :LIST files of current and previous versions/ revisions will be deleted. Afterwards the program checks if there are enough free pages on the user area.

When selecting the LOAD option, there are some questions that need an explanation:

SEGMENT

'Give SINTRAN segment name to load UNIQUE on /UQSIC/'

UNIQUE is loaded on 3 SINTRAN segments which will be named Akseg>, Bkseg> and Ckseg> respectively, where is the answer to this question.

NOTE: Maximum 5 characters in the answer.

SPECIAL

'Do you want to load any SPECIAL routines (Y/N)? /N/'

If you answer Y, the program will ask for the name of the :BRF file which the special routine has been compiled into. Answer N (or ↵) if you don’t have any special routines. See also chapter 4.1.4.

LANGUAGE

'Language to be used if UE is not active? /NO/'

By default UNIQUE will use the language found in the user profile in User Environment. The answer to this question selects the language to be used if UE is NOT active on the terminal running UNIQUE.

NOTIS-WP

'Which version of NOTIS-WP will be used (M or N) /M/?'

Answer M (or ↵) if you have the M version of NOTIS-WP. Answer N if you have version N or later of NOTIS-WP.

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 8

Product Information

Date	Norsk Data	Page 8 of 22
90.01.25	Product Information

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

SW-CONFIG

SW-CONFIG: 'Should it be legal for users to define their own SW-CONFIG:SYMB file? /N/'

Answer Y if you want to allow users to have a personal copy of the configuration file.
NOTE: This should not be allowed if the UNIQUE access control is activated in the global SW-CONFIG:SYMB file. Users will then be able to bypass the control system.

After a successful installation of UNIQUE-II, you must update the system startup file (HENT-MODE:MODE) with the following command:

@MODE (<user>)UNIQ-DUMP-S1-C:MODE (<user>)UNIQ-DUMP-S1-C:LIST

where <user> is the name of the user where the :PROG files are loaded.

4.1.3 Subsequent Installation

If at a later date you want to reload or re-dump UNIQUE, you can use the installation program that is automatically copied from the floppy during the first installation. To re-run the installation program, log in to user area SYSTEM and type:

@(DIALOG-SYS)UNIQ-IN-S1-C-^

To reload UNIQUE, run tasks 3 and 4. To re-dump UNIQUE, run task 4. You may of course also reuse the previously created load/dump procedures (:MODE).

4.1.4 Implementing Special Routines

To install a special routine the following must be done:

• Write the routine in PLANC, COBOL, or FORTRAN and compile it with the appropriate compiler.
• Start the installation program and select the load option. When the program asks if you want to load a special routine you must answer YES.
• The next question is which programming language the special routine is written in. Possible is FORTRAN, COBOL, and PLANC.

ND-895194.1B EN

---

Page 9

PRODUCT INFORMATION

Date	Page
90.01.25	9 of 22

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

• Finally you must give the name of the object file (:BRF) the special code is compiled into.

• A file named UNIQ-LOAD-S1-C:MODE including the load job will be created. You may run it from the installation program if desired. If you have special requirements for the load procedure or the special routine is split on more than one :BRF file, edit the load file in an editor before running it.

If you at a later time want to recompile/reload the special routine, you will have to run the load and dump jobs after compiling:

From user area where the :PROG files are loaded:

@MODE UNIQ-LOAD-S1-C:MODE UNIQ-LOAD-S1-C:LIST~

From user area SYSTEM:

@MODE (<user>)UNIQ-DUMP-S1-C:MODE (<user>)UNIQ-DUMP-S1-C:LIST~

where <user> is the name of the user where the :PROG files are loaded. Remember to update the system startup file (see also section 4.1.2).

4.1.5 INSTALLING DIALOGUE EXAMPLE DATABASE

If you want to install the DIALOGUE example database and the UNIQUE applications (see Dialogue UNIQUE-II Programming Examples, ND-860281), you should select task 5 in the menu. These files are language dependent, and are supplied on the UNIQUE Text System diskettes.

When the program tells you so, insert the UNIQUE Text System diskette, and the examples will be installed on the desired user area.

Enter the <example user> and generate the database named DIALOGUE using SIB-DRL (input file: DIA-DRL:SYMB, DD-catalogue: DIA-DDC:SYMB). Remember to update the file (ND-OPERATIONS)SW-CONFIG:SYMB before starting the database with SIBAS-SERVICE! An example is provided on the diskette.

Prior to running the example applications, enter the <example user> and start UNIQUE-II. Compile the example applications by typing:

> Task : COMPILE-ALL

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 10

Product Information

Date	Norsk Data	Page 10 of 22
90.01.25

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

4.2 Non-Automatic Installation

Create a user area with the number of pages mentioned before and copy all the :BRF and :MODE files from the floppy into it.

Log in to the user area containing the :BRF files.
Edit the file UNIQ-LOAD-S1-C:MODE to suit your configuration and run it by typing:

@MODE UNIQ-LOAD-S1-C:MODE "UNIQ-LOAD-S1-C:LIST"

Update the file 'UNIQ-DUMP-S1-C:MODE' in the same way and run it from user SYSTEM. Remember to update the system startup file (see also section 4.1.2).

5 Modifications

For modifications from version B to C, see appendix C in the manual DIALOGUE-UNIQUE-II Application Development, ND-860210.3.
The conversion program (DIALOG-SYS)UNIQ-CONV-:PROG is described there. (Note: even though different revision numbers have been used, all UNIQ-CONV programs are identical.)

The following sections refer to modifications in version C10 or later.
The manual 'UNIQUE Release Information', ND-860352.1, gives more details (revision C10 only).

5.1 New Functions/Commands

Revision C10:

• Almost all 'yellow keys' (on the TDV NOTIS terminals) may now be programmed (ON-ENDON).
• A facility for compiling whole systems is implemented (System File).
• Global fields are implemented.
• A menu hierarchy may be defined using the new RUN function.
• A new function ORDER-JOB for communicating with the UNIQUE SERVER system is implemented.

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 11

Product Information

Date	Norsk Data	Page 11 of 22
Product name		Product number
UNIQUE-II SIBAS for ND-110		210729C

Revision C13

• New menu command: LIST-VERSION. Displays all information concerning revision level, prefix definitions, etc.
• The system file (:SYS) may now contain System File Commands. The syntax is: <command>=<parameter>

Currently available commands are:

• FILE-NAME=
  Check/compile given application file. This is equivalent to just writing the file name without the "FILE-NAME=" prefix.

• LIST-FILE=
  Write all messages from the system check to the given file. To turn listing off and close the file, give the command with no file name. If the file does not exist, it will automatically be created. The default file type (extension) is LIST (LST).

• ABORT-ON-ERROR=ON/OFF
  ON: Abort system check if a compilation error occurs.
  OFF: Do not abort system check if a compilation error occurs. This is default.

• FORCE-COMPILATION=ON/OFF
  ON: Compile all applications without checking the necessity of it. This is equivalent to giving the file name with extension.
  OFF: Only compile applications which need compilation. This is the default.

The commands may be abbreviated as usual, but there may be only one command per line. If an illegal command is given, a message is given on the terminal, but the system check will not be aborted.

Note: Certain fatal database errors will abort the whole system check.

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 12

Product Information

Date	Norsk Data	Page 12 of 22
Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

Revision C14:

• Some new possibilities are introduced in the SW-CONFIG file concerning User Environment and the Unique Access System:

  UE-REQUIRED=NO/YES
  New command on system level which specifies whether the user must be logged in via UE or not. If YES and the user is not logged in via UE, a message is given and the system is stopped. Default is NO.

  CHECK-USER=NO/YES/EXIST
  New parameter EXIST which specifies that the log-in user must exist as a legal user in the Access System. If EXIST and the log-in user (normally the UE user) is not defined in the Access System, the user is not asked to give a new user name, but a message is given and the system is stopped. Default is NO.

• UNPACKED DECIMAL as storage type has caused some problems concerning the position of the sign. In SIBAS-DRL it is not possible to specify whether the sign is leading or trailing. SIBAS assumes trailing while UNIQUE uses leading as default. A new parameter in SW-CONFIG has been introduced to overcome this problem.

  sign-position=LEADING.TRAILING  (default = LEADING)
  

  The parameter should be specified under SYSTEM-NAME: in the SW-CONFIG file for systems assuming that the sign is trailing.

  SIBAS-DRL allows an S after UNPACKED DECIMALS to indicate separate sign, default is embedded.

• After having disgarded 50 records due to a SELECT statement, the message '... please wait ...' will now be given. After this, the user may abort further database search by first hitting any key and then confirming the abortion by hitting the EXIT key.

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 13

| Date       | Norsk Data            | Page 13 of 22 |
|------------|-----------------------|---------------|
| Product name | PRODUCT INFORMATION | Product number |
| UNIQUE-II SIBAS for ND-110 |  | 210729C          |

# 5.2 CHANGED FUNCTIONS/COMMANDS

**REVISION C10:**

- In the form printout (using the PRINT key), the S-format graphic box symbols are simulated using "-" and "!" instead of just removed.

- It is now possible to have several different logical databases referring to the same physical database.

- The debug function is now complete, i.e. all functions performed are shown.

- The execution of the dynamic LOCK and SET-ATTRIBUTE functions, i.e. with field name specified, are changed. The functions are now performed both on input and display, which for example makes it possible to set attributes on fields dependent on the database contents. Also, when the result field is within the same record as the current field, the setting is only temporary, else it is finite (static).

  NOTE: This change may require current applications to be modified.

- The SET-ATTRIBUTE function may now take repeat line number as parameter.

- The handling of multiuser conflicts is changed.

- The screen updating is made more efficient, e.g. applications with many fields are now written faster to the screen.

- The Access System is improved.

- The SIBAS Headings are used, when available, in user messages.

- The EDITOR function is changed and expanded. The function is now a 'normal' input function, e.g. it may be used inside ON - ENDON. It is also made completely dynamic, e.g. all parameters may be expressions.

  NOTE: This change may require current applications to be modified.

- Nested IF-structures are implemented.

- While entering Username/Password, the system may be stopped using the EXIT key.

ND-895194.1B EN

---

Page 14

Product Information

Date	Norsk Data	Page 14 of 22
Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

• The compiler detects some more errors and gives better warnings.
• While compiling, a line counter is displayed in line 3.
• The message ’<table> found’ is no longer given (considered unnecessary).
• The help function will, on dummy fields (column=’), try to fetch the SIBAS purpose from a column with the name of the field.
• After returning from the EDIT-APPLICATION function, the application is only recompiled if any changes have been made.

Note: There is no official revision C12 of Unique-II.

Revision C13:

• The length of the DOCUMENT-NAME parameter in the EDITOR function is increased from 30 to 60 characters.
• When a special routine is called in search mode (Shift+F7), the APPLCOM parameter will contain the text ’SEARCH’.
• MENU-COMMAND(’@<OS-command>) functions, specifying operating system commands, are now performed immediately and not delayed until the end of the function execution. This means that a sequence of such menu commands may be given. Example:

on COPY
  menu-command(’@DELETE-FILE TO-FILE:DATA’)
  message(’Wait, copying file ...’)
  menu-command(’@COPY-FILE "TO-FILE:DATA" FROM-FILE:DATA’)
endon

Note: SINTRAN commands may write error messages to the terminal and Unique-II is not able to prevent that. However, the cursor is always positioned at the top of the screen before the command is executed, such that the message(s) will start at the second screen line. You may also use the new menu command options to automatically get a screen refresh afterwards.

• Some new options are available when performing an operating system (e.g. SINTRAN) command using the MENU-COMMAND function. The syntax is:

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 15

Product Information

Date	Norsk Data	Page 15 of 22
Date 90.01.25	PRODUCT INFORMATION

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

+-------------------------------------------------+
| MENU-COMMAND('<@options><op.sys. command>')     |
|                                                 |
| <options> is a list of <$option code>           |
|                                                 |
| Note: Revision C11 used '%' instead of '$' to   |
| indicate the <option code> !                    |
+-------------------------------------------------+

Currently implemented option codes are:

• $S Clear the screen before the command is performed.

• $R Refresh the screen after the command is performed.

• $C Close the database before the command is performed.
  Note: Should only be used when the command to be executed is starting a separate program.

• $D Dump restart information before the command is performed. The restart information is dumped to a restart file which makes it possible to leave UNIQUE-II and restart it again getting the same context as given by the restart file. A restart is requested by giving the character @ as the only parameter on the startup command line. Example:

  @UNIQUE-II @
  

• $A After the command is performed, ask the user to confirm by hitting any key on the keyboard. Has the same effect as the HOLD function, except that it is performed, for example, before the screen is refreshed by the $R option.

Example 1: To start the program CHECK-IT after first having cleared the screen:

MENU-COMMAND('@$SCHECK-IT')

Example 2: To start PED (with file WORK) in such a way that after exiting PED UNIQUE-II will be restarted again with the same application and data as when leaving. Also clear the screen before leaving UNIQUE-II:

MENU-COMMAND('@$D$SPED WORK;1,,"UNIQUE-II @"')

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 16

Product Information

Date	Norsk Data	Page
90.01.25	Product Information	16 of 22

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

Revision C14:

• The maximum length of the parameters document-name and initial-document in the editor function is increased to 130 characters. (Version C11 had 30 and C13 had 60 as maximums).
• ND500/5000 only: The maximum number of logical databases in the SW-CONFIG file is increased from 24 to 40.
• ND500/5000 only: The maximum total length of all fields in one application is increased from 2000 to 6000 bytes. This may cause applications not being portable to ND100 machines which still have the limit of 2000 bytes.
• If the user is not logged in via User Environment and the Access System is used, the internal field "AUE-USER:USERNAME" will now contain the user name given by the user on startup. (In earlier versions, the field was blank in such cases.)
• Since C10 the Shift+F7 function has allowed the user to enter search values in locked fields. This has caused some complaints, and a compromise has now been implemented: The user is still able to navigate into a locked key field, but initially, the cursor is always positioned in the first unlocked field of the key.
• After having discarded 50 records due to a SELECT statement, the message '... please wait ...' will now be given. After this, the user may abort further database search by first hitting any key and then confirming the abortion by hitting the EXIT key.

5.3 Removed Functions/Commands

None

5.4 Extended Functionality When Searching

Subchapters A and B describe the changed/extended functionality regarding the setting and removing of search region limits, as well as searching using SHIFT + F7. These rules apply from revision C13.

---

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Data © 2012]

---

Page 17

Product Information

Date	Norsk Data	Page 17 of 22
Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

A. Setting/Removing Search Region Limits

A.1 How to Set Search Region Limits

A search region limit is the key value which marks the first or last record to be available from a table. Normally, the RANGE function is used for setting search region limits. From revision C13, the limits may also be set by the user.

This is useful if you wish to define a temporary "work region" in the table, e.g., before using SHIFT + PRINT.

Search border limits are set by pressing either LEFT BORDER or RIGHT BORDER when the cursor is positioned in a record with contents. The value of the record's main key will then be used as either lower or upper limit respectively. Detailed description of these keys is given below.

Active search region limits are indicated with '(' , ')' or '()' on the status line.

Description of Function Keys Used to Set Search Region Limits

Short description of the use of function keys which may be used to set search region limits. See section B for detailed description of these keys in combination with SHIFT + F7.

(...)
LEFT BORDER.
If you press LEFT BORDER when the cursor is positioned in a record with contents, this record will be defined as the lower limit, and it is only possible to see records with values greater than or equal to the selected record. The status line shows '('.

SHIFT +
(...)
RIGHT BORDER.
If you press RIGHT BORDER when the cursor is positioned in a record with contents, this record will be defined as the upper limit, and it is only possible to see records with values less than or equal to the selected record. The status line shows ')'.

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 18

Product Information

Date	Norsk Data	Page
90.01.25		18 of 22

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

A.2 How to remove search region limits

To remove search region limits, you may choose one of the following methods:

1. Press CANCEL followed by either the LEFT BORDER, RIGHT BORDER or the STRETCH JUSTIFICATION key. These keys are described below in detail.

2. Press any of the above keys when the cursor is positioned in an empty record.

3. Entering query mode (SHIFT + F7) will remove search region limits. (see also section B).

4. The application commands 'FUNC O' and 'C' can also be used to remove search region limits.

Description of function keys used to remove search region limits

CANCEL +

  ...)
 (...

CANCEL LEFT BORDER.
If you press CANCEL when search regions are defined, the cursor moves in home position. You may now press the LEFT BORDER key to remove the lower limit.

CANCEL + SHIFT +

  ...)
 (...

CANCEL RIGHT BORDER
If you press CANCEL when search regions are defined, the cursor moves in home position. You may now press the RIGHT BORDER key to remove the upper limit.

CANCEL +

 > <
 < >

CANCEL STRETCH JUSTIFICATION
If you press CANCEL when search regions are defined, the cursor moved in home position. You may now press the STRETCH JUSTIFICATION key to remove both the upper and lower limits.

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 19

Date 90.01.25                                     Norsk Data                                       Page 19 of 22

+-----------------------------------------+-------------------------------------+
|               PRODUCT INFORMATION       |                                     |
+-----------------------------------------+-------------+-----------------------+
|                                         |  Product name                      |
|                                         |  UNIQUE-II SIBAS for ND-110        |
+-----------------------------------------+-------------+-----------------------+
|                                         |  Product number                    |
|                                         |  210729C                           |
+-----------------------------------------+-------------------------------------+

B. SEARCHING USING SHIFT + F7

SHIFT + F7 leads you into the query mode which allows you to search
for records with a given key value. In this mode the ALTERNATIVE-KEY 
fields are also utilized.

When you press SHIFT + F7 the following happens:

1. Fields belonging to the current table and tables which are owned by
   the current table are cleared. Search region limits which may have
   been set previously, are removed.

2. '?' indicating query mode is shown on the status line.

3. The current search key is marked in inverse video, and the names of
   the table and the key are given as a message.

   If the current field is a key or a member of a key, that key will be
   used as current key, else the main key of the table is used.

4. The cursor moves to the first marked field ready to receive search values.

By pressing SHIFT + F7 again, the next alternative key in the table is
marked and the cursor moves to the first marked field. Repeat SHIFT + 
F7 until the correct key is marked.

DOWN ARROW moves the cursor to the next field in the key, UP ARROW to
the previous field in the key. CR works like DOWN ARROW, except when
used in the last field of a group key.

The search is activated by entering a value in the key and pressing
either LEFT BORDER, RIGHT BORDER, STRETCH JUSTIFICATION or PERFORM
from any field, or CR from the last field in a group key. The search
criteria defined by these keys are described below in detail.

If a search is successful, the record found is fetched and existing
repeat lines are filled. The query mode is turned off. Active search
region limits are indicated with '( , )' or '()' on the status line.

If no record fulfilling the search criteria is found, the message
'XXXX not found' is shown.

The query mode is turned off automatically when a successful search is
done. The query mode may also be turned off by pressing EXIT or HOME.

Subchapter A.2 describes how to remove the defined search region limits.
In addition, search region limits on member level are automatically removed
when a new owner is fetched.

                                               ND-895194.1B EN

                           Scanned by Jonny Oddene for Sintran Data © 2012

---

Page 20

Product Information

Date	Norsk Data	Page 20 of 22
Product name	UNIQUE-II SIBAS for ND-110	Product number
		210729C

Description of function keys used to activate a search

Short description of the use of function keys which may be used when searching in an application using SHIFT + F7, giving the search criteria defined by each of these keys.

 ______
|      |
|______|

CR or PERFORM
CR in the last field of a key, or PERFORM in any field, leads to a search without setting search region limits. The record with the nearest key value to the search value is fetched, but you may look at all records.

  _____
 /     \
|_______|

LEFT BORDER.
In a search activated by LEFT BORDER, a record with the search value or the first record with a higher value is fetched. The search value given is then defined as the lower limit, and it is only possible to see records with values greater than or equal to the given search value. The status line shows '('.

   ________
SHIFT +
 ________
|        |
|________|

RIGHT BORDER.
In a search activated by RIGHT BORDER, a record with the search value or the first record with a lower value is fetched. The search value given is then defined as the upper limit, and it is only possible to see records with values less than or equal to the given search value. The status line shows ')'.

 ___  ___
|   ||   |
|___||___|

STRETCH JUSTIFICATION
In a search activated by the STRETCH JUSTIFICATION key, only records with the same value as the search value are fetched, and the given search value is defined as both the lower and upper limit. The status line shows '()'.

ND-895194.1B EN

---

Page 21

Product Information

Date	Norsk Data	Page 21 of 22
90.01.25	Product Information

Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

5.5 Other Modifications

Revision C10:

• Integration with NOTIS-WP version N is implemented. Files produced with this version of NOTIS-WP may now be read correctly by all UNIQUE products.

  NOTIS-WP version N may also be linked as a subroutine to UNIQUE-II.

Revision C13:

• The default name of XTRA is changed from 'XTRA-C' to 'XTRA'. If XTRA is called something else (or if the name is ambiguous), the correct name must be defined in SW-CONFIG:SYMB as explained in the manual DIALOGUE-UNIQUE Application Development, Chapter 5.

• Due to changes in the S-format required in different versions of the NOTIS products, a new file must be present on user DIALOG-SYS. This file is named UQ-ND-S:INI and must have public read access.

  All S-format files produced by UNIQUE products will have the same S-format header as the file (DIALOG-SYS)UQ-ND-S:INI.

  UQ-ND-S:INI is an 'empty' file containing only an S-Format header matching the version of NOTIS-WP you are using on your machine. By storing the S-Format header in a file, it is possible for you to define the default settings and rulers. UNIQUE will read the default header from this user-defined file, if it exists.

  If you start using a version of NOTIS-WP with a new S-Format, e.g. going from WP version M to N, just repeat the procedure described below and UNIQUE will produce documents readable by the new WP version.

  You have to install/create this file manually:

  1. Log in on user area DIALOG-SYS.
  2. Start NOTIS-WP.
  3. Use the internal menus in WP to set the wanted default values.
  4. Make sure you define it to be an S-Format document.
  5. Type some blanks so WP will store it as a document.
  6. Save this 'empty' document to the file "UQ-ND-S:INI".
  7. Set public access to READ: @set-file-access UQ-ND-S:INI R,,,
  

ND-895194.1B EN

[Scanned by Jonny Oddene for Sintran Dag © 2012]

---

Page 22

Product Information

Date	Norsk Data	Page 22 of 22
Product name	Product number
UNIQUE-II SIBAS for ND-110	210729C

6 Errors Corrected

The product diskette contains lists of the errors corrected in current and previous revisions (filename: UNIQ-ERRLOG-:SYMB).

7 Errors Known But Not Corrected

The above mentioned files also contain lists of errors/problems known in current and previous revisions.

ND-895194.1B EN

Scanned by Jonny Oddene for Sintran Data © 2012

---